JIFETOR Radiator Pressure Leakage Tester Tool Kit, 14PCS Automotive Cooling System Water Tank Leak Test Detector Set with Aluminum Hand Pump and Adapters
AN ESSENTIAL TOOL: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
WIDE USAGE: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible with Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on. All these adapters are color coded, number marked and placed exclusively, can be easily selected according to the marked number in instruction, convenient and no confusion. Check if the adapter caps are suitable when get the kit.
HAND PUMP LEAK DETECTOR: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated bras....
This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
A comprehensive coolant system pressure test & refill kit locates system leaks from header and expansion tanks and fittings, head gasket, radiator core, heater matrix, water pump, hoses and pipes, and is designed for refilling radiators with coolant without introducing air pockets..
The hand operated pressure pump and vacuum refiller is fitted with an accurate and easy to read gauge marked in both psi and bar. The Connections of vacuum refiller are constructed with metal, which has more stability and suction..
The thermometer is designed to aid diagnostics and also ensure the system is cool before removing the cap..
The different colors on each test cap will help operators working much more efficiently to choose suitable cap and work..
17 Pieces color coded test caps are designed for testing cooling systems on most domestic and import vehicles. Is compatible with Mercedes-Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Por....
KDP Automotive Heater Hose Connector, Barb Tee (T-1/4“X1/4“X1/4“( Tee: 6X6X6MM), pack of 2
Usage: Universal and widely used for conectors of the vacuum line and rubber heater hose in engine bay,also can use as the connector of coolant hoseUsage: Universal and widely used for conectors of the vacuum line and rubber heater hose in engine bay,also can use as the connector of coolant hose.
High Quality Material:PA66-GF33 nylon with 35% glass fiber, high temperature resistant and durable.
High Temperature Resistance: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C).
Maximum Pressure: 150 pounds_per_square_inch.
ECONOMICAL: Compared to other types of fitting, this one is considered more economical with high value system component options..
【Packing Accessories】Gasket,Intake Valve,O-Rings,Respirator,Cushion,8mm High Pressure Hose,Water Pipe,Water-Pump,Operational Video.
【Cooling system】Charging rate: 60-85L/min.
2.0-3.0cfm, Filling Time: About 10 minutes to full filling of 1 liter tank, Working pressure: Max 30MPa/300bar/4500psi, Electric power: 1.8kw / 2.5hp, Voltage: 110v /60hz / 16a, Cooling Type: Water coller with fan.
【Advantage】Coolant ON/OFF button: to make cool water cycle and cool down temperature, when water temperature indicate high, you can make compressor temporary stop but keep cool system working, then restart compressor until temperature drop down..
【PCP Air Compressor】Directly to personal PCP air gun、paintball or paintball co2 tanks for filling, not for greater volume scuba diving tanks. Paintball bottle, Max Filling Volume: Less than 1L. (cannot be used directly for breathing).
【Standard Warranty】One year warranty.HPDAVV guarantees the best quality of our products..
3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc
Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Radiator Overflow Tank 2L Universal Coolant Overflow Tank Aluminum Radiator Overflow Tank Visible Coolant Level Radiator Expansion Tank Used To Prevent Coolant Leakage Coolant Recovery Tank
1.[Coolant Reservoir Tank For Car Engine Maintenance]: Universal overflow resivior can be used as an exhaust gas engine oil pot and an overflow pot....
2.[ Radiator Rreservoir Tank With Simple Working Principle ]When the pressure of the coolant in the radiator exceeds the set value of the pressure....
3.[ Coolant Overflow Tank With A Wide Range Of Applications ]: The radiator overflow tank is highly compatible and compatible with most cars. Please....
4.[ High-quality and easy-to-install Radiator Overflow Tank ]: The coolant overflow tank is made of aluminum and is very durable. It can also prevent....
5.[ Large Capacity & Accurately Designed Radiator Expansion Tank ]: The capacity of the coolant overflow tank is 2L, which is twice that of the....
Unique design: different from other ordinary funnels, our high-end coolant funnels have a special rotary switch, which can be closed by turning it gently to effectively prevent overflow or bubbles..
The Coolant Filling Kit Can Deliver Fluids Such as Radiator Coolant and Oil To Any Vehicle, the Long Burp Funnel Prevents Spills and Trapped air During Refills After a Coolant Flush..
The multipurpose funnel kit includes:5 Adapters, 4 Filler Caps, Two 45° elbows, Two 5“ Extender and a High Quality Transparent Antifreeze Funnel Make The Kit..
The longer extension rod is designed for hard to reach areas, and can be placed on the radiator cap at any angle in combination.The thread reinforcement design can ensure that the liquid can not leak under extreme environment..
Multi Purpose: the Spill Free Funnel is Very Suitable for Engine Flushing, Coolant Pressure Tester Kit, and Even Radiator Flushing.
The Coolant Filling Kit Has a Common Spare Part for USA and Foreign Vehicles..
Stant 10047 Cooling System Pressure Tester Adapter Kit
Cooling system pressure tester adapter set Includes adapters needed to adapt test equipment to radiator caps and cooling systems.
Adapter set is for use on various vehicles, including, but not limited to: GM cars and trucks, Ford cars and trucks, select kenworth, freightliner, IHC, Navistar, Volvo and Sterling trucks.
Includes 1 each of the following adapters: 12015, 12026, 12029, 12032, 12033, 12042, and 12450.
Adapters feature metal and/or plastic Construction (depending on adapter).
The Stant coolant system pressure tester kit uses specially engineered testing equipment that can help determine the health of cooling system components like: radiators, caps, and Hoses.
