YAMATIC Super Flexible Pressure Washer Hose 100FT X 1/4", M22-14mm & 3/8" Quick Connect Kits, Kink Resistant Power Washer Extension Hose Up to Rated 3200 PSI/Max 3700 PSI Pressure Washing Hose
...company you every easy, smooth and pleasant cleaning work..
PROFESSIONAL REPLACEMENT HOSE- The 1/4" pressure washer hose is suitable for your home and light commercial washing job, rated 2000-3200 PSI working pressure, and works great up to 3700 PSI. With USA standard fittings this flexible power washer hose fit for most gas power washer and electric pressure washer..
CONVIENT SETUP - Come with quick connect/disconnect adapters set (4 * M22-14MM to 3/8" quick connectors + 1 * M22-14MM extension adapter). Change the tedious screw into fast smooth load /unload. Helps to save time and improve work efficiency..
HIGH QUALITY FITTING - The heavy duty fittings are made of solid brass and high strength steel with twice anti-rust treatment. Could withstand high pressure great without leaks and deformation, is rust-resistant and long service life..
HEALTH ECO-MATERIAL - YAMATIC pressure washer Hoses comply with environmentally-friendly RoHS standard and are made of recyclable material to protect your health and earth clean. If you need any help, please feel free to contact us at an....
【Advantages】High pressure resistance, easy installation and long service life..
【Others】Easy to install: Available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2
Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
KOLERFLO 90W Water Pressure Booster Pump 115VAC,317 GPH,21.7 PSI Household Automatic Shower Booster Pump with Water Flow Switch for Home/Shower H15GR-10
Applicable to the duplex apartment,suburban villas,water heater pressurized,household water pressurized, and the solar water heater pressurized. Our....
Max Flow Rate: 317GPH(20L/min), Max Head: 39.3ft(12m).
Liquid temperature range: 0 F- +212 F.the water boost pump with....
Easy installation, only need a wrench to connect the pump, saving you the cost of plumbers.
the water booster pump is also Energy Saving.
Powerful 90W Motor, High Quality Water flow switch and full brass fittings included, All-in-one unit to make the water booster pump durable and....
We provide 30 days free return and 3 months fittings parts replacement for our water boost pump.If you have any problems for using our products,feel....
JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Meter 1/4" Fittings Can Tap Quick Coupler Adapter, 42" Long
AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly..
REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge..
BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass R134A self-piercing can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. There is also a 1/4" male ....
3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)
【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
64 Pcs JIC 37° Flare Thread Cap & Plug Assortment Kit Seal Adapter Set for Hydraulic Hose Tube and Pipe SAE AN Fittings Galvanized Carbon Steel with Precision Threading Dash Sizes 4 6 8 10 12 16
SUPERIOR PERFORMANCE: AquaAulos hydraulic fittings are made to the highest standards, with our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential. You can trust our products like any leading brands, such as Parker, Eaton Aeroquip, or Gates, as they have been rigorously tested and meet the industry standards for pressure, temperature, and material strength!.
PRECISION-ENGINEERED: We understand the importance of heavy-duty craftsmanship, which is exactly what we strive for in every piece in this kit. Our state-of-the-art CNC machine provides ultra-precise production, ensuring that the caps and plugs are made with fine-tolerance thread with good sealing for easy, repeated installation and removal. This extra attention to the manufacturing process enhances the adapter's performance. It provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs..
Hromee Air Line Tubing Kit, 1/4 Inch (6.35MM) OD x 32.8 Feet Polyurethane PU Tube and Push to Connect Fittings, 14 PCS Compressed Pipe and Accessories Kit
DIY AIR SYSTEM - Hromee compressed air outlet kit allow you to design and install your own pressurized air system. No more dragging the compressor and reconnecting air hose. It helps you keep the working room clean and ordered..
Inner Diameter: 4.15mm. Max Working Pressure: 120 PSI.
Bursting Pressure: 360 PSI. Working Temperature: -4℉- 149℉. PU material provides the high flexible and oil resistant..
CONNECTORS - All the connectors are designed push to connect that is easy to remove and offering good sealing. The kit includes 2 Splitters, 2 Elbows, 2 Tees and 2 Unions. 4 male straight fittings fit 1/4" Tube OD and with 1/4" NPT Thread. The thread need to be seal taped to avoid leakage..
EASY TO USE - All the fittings work by simply pushing the tubing firmly into the the fitting to seal and removing the tubing is just as simple. Cutting tool is included for meeting your tube length requirements..
Ultimate Flexibility: Customer can purchase additional fittings to customize your air line installation, based on your space and compressed air requirements, which is a perfect solution for garages, workshops, barns, etc..
CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs
Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
Made of quality plastic and stainless steel.
3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
Working Temperature: 0-60°C | 32～140°F.
The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
