RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper
42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK
20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Moen Engage Hand Shower and Showerhead Combo Kit with Magnetix (Nickel)
High Pressure Handheld Shower Heads Make Your Showering Memorable in Powerful and Impressed (Applicability, Simplicity and Reliability)..
Powerful Spray Shooting Instantly Increase Showering Pressure Against Low Pressure Water Pipe Condition..
Take a deep breath and relax as the water pour down over you, then you can actually feel the Water Pressure Boosting. Great strength water pause impact to relieve muscle pain..
Great Soften Rubber Jet Nozzles prevent the build-up of minerals, easy for Blockage Removal by fingers. The Shower head body and Bracket Mount are made from High Strength ABS engineering grade plastic. We use Stainless Steel Hose with the solid brass connection fittings that won't crack or split..
Product Unit Packed w/ 3-functions high pressure handheld shower for alternative option, w/ 79'' Luxurious Stainless Steel Hose, w/ Adjustable Shower Bracket, w/ Water flow regulator ( as optional if you do feel the water spray hits to strong), w/ Extra hose gasket (in case of future demand), w/ FAQ guidance and w/ Customer service card.
YOTOO Hybrid Air Hose 3/8-Inch by 50-Feet 300 PSI Heavy Duty, Lightweight, Kink Resistant, All-Weather Flexibility with 1/4-Inch Brass Male Fittings, Bend Restrictors, Red
EXCELLENT MATERIAL: This air hose is blended rubber and PVC air hose is heavy duty, lightweight, flexibility,abrasion resistance and all weather use..
EASE TO USE: Equiped with 1/4” industrial NPT fittings and quick coupler for directly connect to air compressor and air tools. No need to buy seperately air fittings..
BOTH ENDS INSTALLED BEND RESTRICTORS: Bend restrictors reduce kinking and help to increase the life of the air hose.
HIGH STRENGTH: 3/8 INCH inner diameter by 50 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure..
YOTOO Hybrid Air Hose 1/4-Inch by 50-Feet 300 PSI Heavy Duty, Lightweight, Kink Resistant, All-Weather Flexibility with 1/4-Inch Industrial Quick Coupler Fittings, Bend Restrictors
EXCELLENT MATERIAL: Blended rubber and PVC air hose is heavy duty, lightweight,flexibility,abrasion resistance and all weather use..
EASE TO USE: Equiped with 1/4” industrial NPT fittings and quick coupler for directly connect to air compressor and air tools. No need to buy seperately air fittings..
BOTH ENDS INSTALLED BEND RESTRICTORS:: Bend restrictors reduce kinking and help to increase the life of the air hose.
HIGH STRENGTH:: Hybrid air hose is 1/4 INCH inner diameter by 50 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure..
JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV
...esel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to release pressure safely and recovery fuel easily. Blow molding case keeps everything in place and protects the gauges during storage..
CHECK FUEL INJECTOR PUMP PRESSURE: The pressure tester is designed for checking fuel injection pump pressure and fu....
Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT
... Thickness. PLEASE MAKE SURE YOUR TUBING SPECIFICATIONS FALL WITHIN THESE RANGES FOR THE PROPER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing irrigation fitting expectations worldwide. The patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on..
McKillans Short Pressure Washer Gun with Swivel - High Pressure Water Handle with 3/8" Male Plug and 1/4” Quick Connector Coupler - Power Washer Gun Compatible with Foam Cannon - Car Wash Foam Gun
✅ Swivel Design: Equipped with a swivel inlet that allows your hose to rotate freely during use, prevent annoying kinks and wrestling with your hose..
✅ Preinstalled Fittings: Our guns come with the fittings preinstalled with teflon tape and locktite. Saving you time and effort..
✅ Lightweight Pull Trigger: Hold the pressure washer gun for long durations without getting tired. The snub nose design makes it easy to maneuver with just one hand. The short gun design is very convenient for use with a foam cannon..
✅ Why Us: Our swivel is one of the smoothest in the market. Built with real stainless and brass fittings, unlike the competition. Preinstalled fittings ensuring durability and leak resistance..
✅ Made for Detailers: The McKillans Pressure Washer Gun is the perfect upgrade for your power washer. The integrated swivel helps save you time by keeping your hose tangle free. The small body design makes the gun easy to handle and maneuver. Stop using the long, leaky, and cheap stock gun that comes with your pressure washer, and upgrade to a quality gun. The small design ma....
Utah Pneumatic Plastic Push To Connect Fittings Tube 10 Pack 1/4\ Od Straight Push Fit Fittings Tube Fittings Push Lock Hose Union (1/4\ Straight)
utah pneumatic Push to Connect fittings: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fittings.
Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape.
All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned.
At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Brass push connectors Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings.
