3M VHB Tape 4611, 0.375 in width x 36 yd length, 1 roll
Applications: the acrylic adhesive allows instant bonding. This double-sided tape is used in applications like bonding of finishing trims and moldings in the automobile, heavy-duty vehicle, and equipment industries.
Temperature Resistant: the permanent bonding adhesive has a high temperature resistance. Being resistant to UV light, moisture, solvents, and harsh chemicals, the adhesive tape can bond and seal even in extreme environments.
Fast and easy-to-use: this two-sided tape guarantees a smooth surface appearance and creates a high strength bond between substrates without the need of rivets, spot welds, screws, and liquid adhesives.
Compatibility: this firm foam tape perfectly bonds to glass and high surface energy bare metal surfaces, such as aluminum, galvanized steel, and stainless steel. The acrylic tape offers design flexibility due to its viscoelastic properties.
Product Specifications: this high-bonding adhesive tape is 0.045 in. thick and measures 0.375 in. (width) x 108 ft. (length). Designed in dark gray, the bonding tape is layered with general-purpose adhesive on both the sides.
Joseking Resin Tape for Epoxy Resin Molding,High Temperature Resistance PET Silicone Adhesive Tape,Easy Peeling and Remove Residue Epoxy Release Tape for River Tables (2 Inches x20 Yards), Green
High Temperature Resistance & No Melting— Joseking resin tape is made of High-Quality PET film with high temperature resistant silicone.It has a high temperature resistance up to 200°C in a short period of time (about 30 minutes).The combination of water resistance and abrasion resistance makes it suitable for high temperature process projects such as painting, plating, and circuit boards,etc.Prevent curling, shrinkage and edge warping, making them perfect for your craft projects..
Easy To Peel & No Adhesive Residue— Due to the nature of the product, Joseking resin tape is self-adhesive and easy to apply with moderate viscosity when in use.It is also easy to peel off and remove cleanly without leaving any residue.Our epoxy resin tape can be used when you are working with 2 part epoxy molds,an epoxy resin table or as an encapsulation tape can be used to produce beautiful lines..
Chemical & UV Resistant— This epoxy tape is not only high heat resistant but also acid and alkali resistant and corrosion resistant.It retains adhesive properties when exposed to chemicals, high heat and light.It is ideal for crafting and working with professional marine grade epoxy..
Thermal Silicone Adhesive Tape For Powder Coating— It can be used as powder coating tap....
KUNFINE Car Electronic Throttle Controller Racing Accelerator Potent Booster Tuning Parts Accessory ForHYUNDAI GENESIS 2009-
The Electronic Throttle Accelerator through the control car throttle open to improve the sensitivity of the handling of the car to better adapt to different people's driving habits and keep driving conditions..
The Electronic Throttle Accelerator includes six modes,namely."manual full throttle acceleration","automatic full throttle acceleration","manual semi throttle acceleration","automatic semi throttle acceleration","original auto mode"and"fuel saving mode".
except "original auto mode".there are 9 levels adjustment in other modes.
therefore,the product has 46 levels for adjustment..
The Electronic Throttle Accelerator speed acceleration sense of the product is graded subtly from strong to weak level(see the effect chart of outer packing).
use of relatively smooth effect curve ensures acceleration sense without increase difficulties in accelerator operation..
In order to have a better adaptability of autos' gear shift rule,automatic gear shift mode and manual gear mode are distinguished.
the acceleration sense of the manual gear mode with the same level is stronger than the automatic mode.
however,when put into practice,the mode can be set up based on the drivers' habits without restrictions of manual gear or automatic gear..
Starbond Instant Set ACCELERATOR (Activator) for CA Super Glue, Pump Sprayer Bottle (8 ounce)
✅ SUPER GLUE ACCELERATOR - SPEED UP THE BONDING TIME: No more waiting! Cures CA glue in seconds..
✅ NO MORE WHITENING: When superglues dry too fast, you'll end up with whitening or "hazing" of the bonding surface. Our specially formulated CA accelerator is made to dry slightly slower than other accelerators on the market to prevent this effect..
✅ EASY BONDING: Simply spray accelerator on one surface, glue on the other surface, and press together and hold for a few seconds..
✅ PUMP SPRAYER ADVANTAGE: Have the option of spray application and unscrewing the cap for spot-on application with q tips..
EMEDA Lash Bonder for Eyelash Extensions, Not Glue, Glue Accelerator for Eyelash Extensions, Sealer Adhesive, Speed up Glue Drying Time,Add Glue Elasticity,Lock in Glue Fume(15ml Super Bonder Sealant)
What is EMEDA lash bonder ?[IT IS NOT GLUE] EMEDA lash bonder also referred to as adhesive activator or lash sealant, is an accelerator for eyelash extensions glue that needs to use with eyelash extension glue.15ml last 150-200 clients.EMEDA super bonder is the best glue helper for eyelash extension on the market.Please notice that this is NOT A GLUE..
How does this eyelash bonder work? The super bonder’s job is to add elasticity to the adhesive making the bonds more flexible, therefore resulting in better retention.Only need like a very small drop of lash bonder,expedites the drying process of lash adhesives by dehydrating the adhesive,instantly polymerises the glue,without shock curing..
REDUCE EYES IRRITATION OF GLUE:Use lash bonder after start lashing to speed up glue curing time.The lash bonder locks in the fumes from the adhesive and with the fumes contained, irritation and sensitivity are significantly reduced!.
LASH SEALANT FOR EYELASH EXTENSIONS:Use super bonder for lash extensions after lashing and glue will have completely sealed and the lashes are safe to wash!.
Double Sided Mounting Tape 1”x 32.8 Ft 3M 9448A Double Coated Tissue Tape Strong Adhesive Heavy Duty Transfer DIY Tape White Color for LED Strip Light Office Home Car Décor(9448AB)
...and conversion. The acrylic adhesive on this 0.15 mm double sided tape is tested for substrates including PE and stainless steel. The carrier can provide dimensional stability to foams and, with the PCK liner, makes for easy die cutting and laminating..
HIGH QUALITY: ① Adhesive formulated to hold well even in high temperatures. ② Medium-firm acrylic adhesive system delivers high adhesion to a range of substrates. ③ Non-toxic and environmental. ④ High temperature resistance and waterproof.and durable.⑤ Strong adhesive and easy to removal. ⑥ Powerful ability to bond a variety of surfaces. ⑦ Tissue carrier adds dimensional stability and improves conversions..
RECOMMENDED: Recommended applications for Nameplate bonding,Plastic film lamination/bonding,Foam bonding,Splicing, Lens bonding applications. Logo bonding. Touchpad bracket assembly. Module bonding to PET card. Touch panel bonding. Rubber feet bonding. Low surface energy bonding..
INSTALLATION AND REMOVAL: After application, The bond strength of 3M Laminating Adhesive 9448A increases as a function of time and temperature, and has very high initial adhesion when the adhesive flows onto the surface. Besides the bong strength will build over time. Using a knife to cut an open on bac....
Dixell 9 Drive 9 Mode Electronic Throttle Controller Pedal Accelerator Booster For CHEVROLET DODGE FIAT HUMMER HOLDEN JEEP OPEL VAUXHALL, KA-809 Connector
...onnector before you order,if you have any issue,please contact me first,tell me your vehicle model and year,we can check and confirm for you,i do this,only hope you can receive the right item,any question,please contact me..
Installation Step: firstly: find out the vehicle accelerator pedal secondly: unplug the vehicle accelerator pedal interface third: connect the throttle controller with accelerator pedal interface forth: stick the throttle controller on the place near to the dashboard.
Installation points: 1. Turn off the flame and wait for 5 minutes 2. Unplug the original car's accelerator pedal interface 3. Connect the two interfaces of the controller to the ECU and the pedal throttle respectively. 4. Make sure the cable connection is secure and does not hinder driving 5. Stick the electronic display to a convenient location..
Accelerator self-learning steps: 1. Connect the line when the car is powered off, then energize the car but do not start. 2. Press and hold the MODE button to enter the setting 8xx mode, then adjust to 800 by adding and subtracting buttons. 3. After the screen displays 800, then use the foot....
3M 4611/GRY136 Scotch 4611 VHB Tape: 1" x 36 yd, Dark Gray
3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....
GY-521 MPU-6050 MPU6050 Module, 3 Axis Accelerometer 6 DOF Gyroscope Sensor Module Kit 16 Bit Converter Data Output IIC 3-5v Compatible with Arduino (10 Pieces)
GY-521 MPU-6050 module: integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port, like another accelerator of other brands, magnetometer, or Digital Motion Processor (DMP) of other sensors.
Parameter range: the MPU-6050's angular velocity range is ±250, ±500, ±1000 and ±2000°/sec (dps) for accurate fast and slow motion, and user-programmable accelerator full-frame sensing the range is ±2g, ±4g±8g and ±16g.
Transmission can pass I2C up to 400kHz or SPI up to 20MHz.
Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs.
Easy to use: the measured values of the sensor can be interrogated by the I2C interface.
The accelerometer can be operated at both 3.3V and 5V.
Compatible with Arduino and Raspberry Pi.
Universal usable: the sensor can be applied to develop various entertaining applications and systems.
Nice for projects with gaming and virtual reality devices, navigation (for drones and RC planes) and DIY robots.
3M 4611/DGRAY0755 Scotch 4611 VHB Tape: 3/4" x 15 ft, Dark Gray
3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....