Best Hole Making Reamer Bit

JIECHENG 6 inch Hole Saw for Cornhole Boards,Metal,Drywall,Plasterboard,Wood and Plywood

  • High grade hole saw 6 inch with 3/8'' Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes..
  • Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation.
  • Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge..
  • Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed..
  • Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring..
  • This item is mainly for all kinds of woods and soft material, but not for thick steel plate..
  • The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck..
Check Stock

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock

Bridge (Construction) Reamer 1-3/16\ Extra Long Magnetic

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Combination black and gold finish, for improved lubricity, corrosion resistance, and to reduce chipping or flaking.
  • These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Construction reamer is especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies.
Check Stock

CO2 Inflator and Tubeless Tire Repair Kit - Presta & Schrader Valve Compatible - Bicycle Tire Pump for Road and Mountain Bikes - No CO2 Cartridges Included

  • ...adapters needed! Simply drop the CO2 cartridge into the cup, screw on the head, attach to valve, slowly turn the lever to release air. So quick and easy you’ll be back to riding your bike in no time!.
  • 【Repair a Hole in Seconds】: This Tubeless tire repair kit contains essential tools. Besides the essential tire reamer and plug fork tools, this tubeless tire repair kit features a valve stem core removal tool that will allow you to remove the valve stem core and insert maximum, unrestricted air pressure to seat the bead and air up tire..
  • 【Easy and Quick Puncture Repair】: Our Tubeless tire repair kit works with a wide variety of tubeless tires, no tube tires - Mountain, Road, Hybrid, E-Bike, Cyclocross, Gravel Bikes and ATV. Storage canister neatly includes the needle (tire reamer and insertion tool), valve stem core removal tool, 5 rope plugs( 1.8mm thickness for little hole) and a Ball needle..
  • 【NOTE】: When you inflate you bike tire with CO2 inflator. CO2 cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort. But please note that you'll more than likely find that your tire will be flat within 24 hours because CO2 will leak out of your tire faster than air. So don't forget to pump it up befo....
Check Stock

uxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs

  • The reamer range is 15/32 inch to 1-1/2 inch..
  • Product includes 11Pcs high speed adjustable hand reamers H4-H14..
  • The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
  • Adjustable reamer is straight flute with straight handle..
  • The reamer is suitable for drilling machines and other machine..
Check Stock

BOSCH DLSB1007 1-Piece 5/8 In. x 16 In. Daredevil Extended Length Spade Bits

  • Features a full-cone threaded tip for fast and effortless drilling.
  • Hex shank power groove to reduce slippage.
  • Provides a cleaner hole quality with reduced breakout.
Check Stock

#12x2\ Reamer Tek Torx/Star Head Self-Drilling Wood to Metal Screws - 1 Pound - 68 APX. Tex Screws - for Flatbeds, Trailers or Fastening Wood to Steel - T-25 Torx Screw Head

  • Length of Screw Does NOT Represent the Usable Length of Thread / Thickness of Wood - See Graphic.
  • Maximum Wood depth ~13/16" - Maximum Metal Thickness Screw Can Bore ~3/16" - Use T-25 Torx/Star Bit.
  • Dimensions: Head Width .42" - Total Length 2" - Shank Diameter .21" - Torx /Star Bit Not included.
  • Reference Installation Instructions Before Installing - NOT For Welded Seams or Tempered Metal.
  • Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum.
Check Stock

Viking Drill and Tool 12270 CR-4SP 4 piece Set Type 50-UB Standard Flute Magnum Super Premium Car Reamer

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

Kweetle Upgraded 10 Pcs TCT Hole Saw Kit, Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • ...graded high quality TCT Carbide, High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • 【Upgraded Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, outer blade, middle blade, and inner blade, making it sharper and more efficient. This Set of Tungsten Carbide-Tipped Hole Cutters can cut precise holes in a lot of materials.
  • 【Size】:Package includes 10 Hole Saws in most popular sizes-16mm(5/8”), 18mm(11/16”), 20mm(3/4”), 22mm(7/8”), 25mm(1”), 30mm(1-1/8”), 35mm(1-3/8”), 45mm(1-3/4”), 50mm(2”), 53mm(2-1/8”). Cutting perfect holes for conduit and pipes..
  • 【High Precision and Convenience】Each kit includes a split point pilot drill bit preventing bit walking and ensuring very high quality and smooth holes, and an ejection spring providing easy slug removal, Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Multipurpose and Rust-Resistant】Each hole cutter kit is oiled for rust-resistant & well-organi....
Check Stock

CAT40-ER32 Collet Chuck 2.76' Gage Length 8pcs New Tool Holder Set for CNC Engraving Machine and Milling Lathe Tool

  • With good centering function, mainly clamping straight shank cutter.
  • It is often used for clamping end milling cutter, drill bit, tap, reamer, center drill and other cutting tools..
Check Stock