Best Hole Sizing Tool

Luckyway 10-Piece Screw Extractor and Left Hand Drill Bit Set, Bolt Extractors, for Removing Broken Studs, Bolts, Socket Screws, and Fittings

  • ..., handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit..
  • HOW TO USE - A broken bolt or screw may be removed from a hole with a Screw Extractor. First, drill a hole in the broken bolt. The correct drill size to use is stamped on each Screw Extractor. Insert Screw Extractor in the hole and, with a Tap Wrench, turn counterclockwise. The Screw Extractor acts like a corkscrew. It grips into the sides of the drilled hole and removes the broken part on its own threads without damaging the threaded hole..
Check Stock

Gatorback B145 Carpenters Triple Combo w/Pro-Comfort Back Support Belt. For Best Fit Measure ACTUAL WAIST SIZE OVER CLOTHES. (Large 36'-40')

  • WARRANTY: Every product sold by Gatorback is backed by a one year defect free warranty! If there is a problem with the bags such as a rivet or stitching, contact us, we will replace the defective piece on your belt free of charge! The product must be purchased from us to be protected under our warranty..
  • SIZING: All of the Gatorback sizing is based off the average fit for each size, if there is any issue with sizing contact us before returning and we will send out the size you need free of charge! We like to look out for our customers!.
  • MAXIMUM COMFORT: The Gatorback Tool Belts have a patented air channel design to provide the user with a breathable, comfortable and sweat free experience. Even the foam backing we use in our belts is an ultra-breathable material to keep the belt cool and comfortable!.
  • BUILT TOUGH: EVERY stress point on the pouches and on the belt are riveted AND bar tacked to ensure the pouches hold up for a long time! The material used on every Gatorback item is heavy duty 1250 DuraTek nylon, this keeps the pouches rugged and durable but light enough to not weigh you down. The right side is our Carpenters Tool Pouch w/Hammer Loop. Center Pouch is our 8" deep Single Pouch and the left side has our 7 Pocket Fastener tool pouch with w....
Check Stock

DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch)

  • DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel.
  • DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel.
  • All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes.
  • All quick change mandrels utillize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications..
Check Stock

MagnetRX® Pure Copper Magnetic Bracelet - Magnetic Copper Bracelets for Men - Adjustable Length with Sizing Tool

  • ...pper jewelry requires proper care to maintain the original color tone. Users should keep the copper bracelets dry to prevent patina/discoloration..
  • ☑️ ONE-SIZE FITS ALL – This magnetic copper bracelet for men arrives at 9.0 inches (23cm) in length and includes a FREE sizing tool that allows you to remove/add links to make it the perfect fit for your wrist! The sizing process takes under 5 minutes and instructions are included. If needed, extra links can be provided on request..
  • ☑️ THE PERFECT GIFT – This elegant mens copper bracelet is presented in a luxurious gift box and includes a velvet pouch, sizing tool, and instruction manual - making it the perfect gift for a friend or loved one!.
  • ☑️ SATISFACTION PROMISE – MagnetRX is the trusted name in magnetic jewelry! If you are not completely satisfied with your MagnetRX purchase, simply contact us and we will make it right. You have nothing to lose, grab yours today!.
Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
  • IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
Check Stock

ARIAT Kid's Fresno Belt Brown Size 26

  • Tons of sparking rhinestone and gun metal color circle studs in the middle of the belt strap.
  • 3 sets western style sparkling rhinestone buckle..
  • Sizing: belt size is measured from buckle prong to center hole, the third hole from the tip end, excluding buckle length. Order one or two inches larger than pants size for best fit, e.g. 30" pants take belt size 32", 26-28" pants take size 30".
Check Stock

SPEEDWOX Ceiling Grid Punch Pliers 10 Inches Grid Hole Punch for Rivets Multifunctional Puncher Pliers for Metal Sheet

  • 【APPLICATIONS】The hole puncher will make a very clean hole, cut easy and don't have squeeze very hard to puncture through. This tool is a real time saver when there is a need to install pop rivets in the dropped ceiling grid structure. The pliers is widely used for the opening of thin metal sheet in the decoration, hardware processing and other industries..
  • 【DESIGN】The replaceable hardened die tip will remain super sharp throughout your project. It can put perfect hole in two pieces of ceiling grid in seconds. The little rubber tip prevents any scratches on the metal grid. This tool is well constructed and will last a long time..
  • 【MATERIAL】Chromium vanadium alloy steel is very sturdy and heavy duty. The hole punch in the metal without much effort. This tool is well constructed and will last a long time. The antirust oil may be appeared on the tools, it will not affect the function, just wipe it clean with a duster cloth..
  • 【COMFORTABLE HANDLE】Non-slip ergonomic handles for single-hand operation which can greatly reduce fatigue after long time work..
  • 【CUSTOMER SUPPORT】 We value every single customer feedback, always friendly customer service behind SPEEDWOX products, 100% MONEY BACK guarantee..
Check Stock

Gatorback B240 Electrician's Combo with Pro-Comfort Back Support Belt. Heavy Duty Ventilated Work Belt (Large 36-40 inches)

  • SIZING - MEASURE ACTUAL WAIST SIZE, DO NOT USE PANT SIZE. When measuring waist, make sure to measure tighter as you would when putting on a belt. All of the Gatorback sizing is based off the average fit for each size, if there is any issue with sizing contact us before returning and we will send out the size you need free of charge! We like to look out for our customers!.
  • WARRANTY: Every product sold by Gatorback is backed by a one year defect free warranty! If there is a problem with the bags such as a rivet or stitching, contact us, we will replace the defective piece on your belt free of charge! The product must be purchased from us to be protected under our warranty..
  • MAXIMUM COMFORT: The Gatorback Tool Belts have a patented air channel design to provide the user with a breathable, comfortable and sweat free experience. Even the foam backing we use in our belts is an ultra-breathable material to keep the belt cool and comfortable!.
  • BUILT TOUGH: EVERY stress point on the pouches and on the belt are riveted AND bar tacked to ensure the pouches hold up for a long time! The material used on every Gatorback item is heavy duty 1250 DuraTek nylon, this keeps the pouches rugged and durable but light enough to not weigh you down. The right side Electric....
Check Stock

MagnetRX® Pure Copper Magnetic Bracelet – Magnetic Copper Bracelets for Men – Adjustable Length with Sizing Tool (President Style)

  • ...otective coating for enhanced durability. Copper jewelry requires proper care to maintain the original color tone. Users should keep the copper bracelets dry to prevent patina/discoloration..
  • ☑️ ONE-SIZE FITS ALL – This magnetic copper bracelet for men arrives at 9.0 inches (23cm) in length and includes a FREE sizing tool that allows you to remove/add links to make it the perfect fit for your wrist! The sizing process takes under 5 minutes and instructions are included. If needed, extra links can be provided on request..
  • ☑️ THE PERFECT GIFT – This elegant mens copper bracelet is presented in a luxurious gift box and includes a velvet pouch, sizing tool, and instruction manual – making it the perfect gift for a friend or loved one!.
  • ☑️ SATISFACTION PROMISE – MagnetRX is the trusted name in magnetic jewelry! If you are not completely satisfied with your MagnetRX purchase, simply contact us and we will make it right. You have nothing to lose, grab yours today!.
Check Stock

Leather Working Tool, Leather Hole Punch, Half Round End Punch Leather, Leather Punch Shapes, DIY Embossing Punching Cutting Grinding Tool, Hole Hollow Punch Cutter, 18pcs

  • [Punching Tool]: This leather craft embossing punch can help you punch holes in the leather to obtain the desired shape.
  • [18PCS]: There are 18 This leather craft punching tool in total, which can be used for a long time.
  • [High-quality Steel]: This leather hole punch is made of high-quality steel with good durability.
  • [Portable Size]: The size of This diy embossing punching cutting grinding tool is very suitable for carrying, you can use it at any time.
  • [Application]: This hole hollow punch cutter is mainly used for leather craft embossing punching tool, DIY leather punching, cutting tool polishing.
Check Stock