Best Hollow Shaft Motor

AQUOS Haswing 12V 55LBS Bow Mount Trolling Motor with Remote Control and Quick Release Bracket for Pontoon Boat Fishing (Black, 54)

  • Haswing Cayman 12V 55LBS 54″ Shaft Bow Mount Trolling Motor is designed and engineered to run quieter than ever before. It’s so quiet that the fish will never hear you coming. With variable speed will let you dial in your desired speed and provide more precise, smoother adjustments plus improved control. Moreover the variable speed is the lower power consumption of the motor, it can increase battery life quite a bit at any speed. Also the trolling motor suitable for boats weighing up to 2750LBS..
  • The remote control fits into the palm of your hand easily or can be attached around your neck or belt with a lanyard. You can conveniently control the motor on the boat or shoreside with the farthest 164 feet distance, at the same time the remote control can be recharged with a USB cable on power bank when necessary. Quick release bracket can help you to install/remove the motor easily..
  • Cruise control keeps your boat at the desired speed by using remote control to press on the speed up or down button then you can focus on fishing all the way, but you might have to manually correct the direction from time to time due to wind or current, meanwhile you can adjust the speed when you need. And if you turn the motor 180 degrees of rotation and it will push the ....
Check Stock

3pcs/Pack Brass Mini Ball Valve Shut Off Switch 1/4" NPT Male x 1/4 INCH NPT Female Rated to 600WOG for Water Air Compressor Etc

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

Fasco 50746-D500 Centrifugal Blower with Sleeve Bearing, 3,100 rpm, 115V, 60Hz, 0.72 Amps

  • Ideal Addition : The entire body of the motor output shaft relative to the general direction of gear motor short, widely adapted to some of the installation sizes of this aspect is required..
  • Vertically Arranged : The gearbox output shaft direction of the motor shaft is arranged vertically..
  • Wide Application : Widely used in windows, a door opener, miniature winch and other occasions​..
  • High Performance : No self‑locking, working well..
  • Optional Speed : 5rpm / 6rpm / 20rpm / 40rpm / 62rpm..
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver(Model Name: NVBDL)is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

Dumble 12V RV Vent Fan Motor Replacement with D-Shaft – RV Fan Motor, Camper Vent 12 Volt Motor, RV Exhaust Fan Motor

  • ...wer an RV vent fan such as a bathroom fan or a range hood fan.
  • EASY TO INSTALL: Wire your fan to the motor switch, then wire the switch to your RV.
  • Ensure that the wires connect black to black (grounds) and the other wires connect together.
  • Save your old fan blades – Pull on the hub (center part of blades) off the shaft and push blade center hub back on the new motor shaft (Flat side on motor shaft used to align hole in hub and slide on).
  • 3mm mounting screws and fan blade not included.
  • ROTATION: This bathroom vent fan motor replacement has reverse polarity, meaning that it can be wired to turn in either clockwise or counter-clockwise rotations.
  • Rotation direction depends on your fan blade wiring (one wire goes to the hot side of switch, other goes to ground).
  • To determine the direction of spin on your existing fan, look down through the motor at the top of the blade.
  • FITS YOUR RV: 1/8-inch diameter x 3/5-inch length (3.17mm x 15mm) half-moon (D-shaped) shaft.
  • 1-2/5-inch diameter x 2-1/5-inch length (36mm x 57mm) body.
  • Compatible with Elixir, Heng's, Jensen, Ventline, and similar 6-inch (15.2cm) fan blades.
  • There are multiple heights for the bathroom fan motor assembly - Compare this unit measurements with your current exhaust fan motors unit to ensure....
Check Stock

CENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
  • 【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
  • 【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
  • 【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

Mophorn Air Compressor Motor, 3/4 HP Single Phase Electric AC Motor 1725rpm Reversible 115V 230V 56 Frame Electric Motor for Air Compressor General Equipment

  • 1.5hp Electric Motor: Compact and small-sized AC motor feature output 3/4 HP, 56 frame, and single phase. Gasketed capacitor housing and conduit boxes protect all environments..
  • Working Efficiency: The heavy-duty electric motor with a rated speed of 1800 RPM has high working efficiency. Run at 0.75 HP. Shaft diameter: 5/8 inch Keyed shaft, shaft length: 1.875 inches..
  • High Speed Cooling Fan: Big fan at one end cools the motor in hours' running, even in dusty or damp environments. Reducing energy costs or overheads, reducing the running temperature, increasing winding lifetimes..
  • Steel Housing: The electric motor is made of high-quality steel. Robust and reliable materials can protect the motor well. Smooth appearance and stable frame..
  • Multiple Application: Our 3/4 hp electric motors are universal and commonly used in industrial and agricultural production, transportation, commercial and household appliances, and other fields. For instance, the matching of water pumps, agricultural machinery, etc..
Check Stock

6' RV Vent Fan 12V D-Shaft RV Vent Motor Replacement Camper Fan Blade Home Bathroom Mobile Home RV Motor

  • 6 inch fan blade for 12 Volt powered roof vents and range hoods.Fits Jensen 12 Volt Powered Roof Vent, above 1995 Jensen Powered Range Hood..
  • 1/8 inches D-bore CW spin, Direction of spin is determined by looking down through the motor, at the top of the blade..
  • Fan Blade: 6" x 0.75", Motor Body Measurements: 2.125" Long, Overall Length of motor including the shaft 2.9375" Long, Shaft: "half-moon" or "D" shaft - .125" Diameter x .625" Long..
  • The fan blade made of durable plastic which can resist rust and corrosion, and last for a long time. And all our motor had been tested before you got it, we care a lot about your device safety..
  • Using our motor with fan on your RV, can effectively exhaust lingering smells in the bathroom and built-up moisture, provide a healthy environment for you..
Check Stock

INDUSTRIAL SEWING MACHINE MOTORS HIGH SPEED CLUTCH MOTOR

  • Industrial High Speed Clutch Motor Watts: 400 Watts & 550 Watts available Power: 110 Volts Rotation: Bi-directional RPM: 3450 (High Speed Motor) Shaft: AMCO Shaft Weight: Approximately 42 Lbs Available Pulleys: 630, 632, 634 Hardware & Belt Cover included.
Check Stock

AiTuiTui Bike Front and Rear Axles Hollow Hub Shaft Fit for Road Bike, Mountain Bike, MTB, BMX

  • Our updated Road Mountain Cycling Hub parts are made of Steel 1045, durable and practical for most bikes. Please see images, and you will find the different from others, the cap is thicker..
  • The Rear hollow shaft size: approx. 145mm / 5.7", hole diameter: approx. 9.2mm / 0.36".
  • The front hollow shaft size: approx. 105mm / 4.1", hole diameter: approx. 9.2mm / 0.36".
  • The durable and extra hard dustproof cap, the thickness: 65 degrees, 2.4mm / 0.09inch. Usually the axels fit 20" 22" 24" 26" 28" bike, work on a 6 7 8 speed road bike..
  • The bike hub weight: approx. 200g / 7.05oz, color: black. Please double check the size before purchasing.
Check Stock