BeaverCraft Wood Carving Gouge Chisel 7L/22 Wood Carving Tools Bowl Carving Carbon Steel Blade Wood Handle Radial Gouge Hard and Soft Woods Long Bent Gouge G7L/22
Long Bent Gouge: BeaverCraft gouge works perfectly for spoons and bowls. The spoon gouge is designed for cutting deep recesses, hollowing out bowls....
Spoon Chisel Very Sharp: be careful during woodcarving and wear cut-resistant gloves. A bowl carving chisel needn’t be sharpened when you get it....
Spoon Carving Gouge High Carbon Steel Blade: a bent gouge can help make incredible things and its steel is very tough, made for wood carving. The....
Gouging Chisel Bonus E-Books: join a friendly family of carvers who love BeaverCraft whittling tools and get useful eBooks "How to prevent knives from....
Wood Whittling Tools Made in Europe: everything created by BeaverCraft is made in Ukraine so we take making European quality tools very seriously and....
Penn State Industries PKMALLET Brass Mallet Woodturning Project Kit
A lathe is needed to make a finished handle.
Blank, 1/2" forstner bit, and all other turning supplies are not included.
Each PKMALLET kit includes (1) Brass Head measuring 1-1/4" diameter x 1-7/8" long and weighing 11.5 oz. , and (1) 3" internal connecting bolt with 1/2" x 13tpi thread.
Recommended minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4-1/2".
This is a Turn-Between-Centers woodturning project kit.
Customize the turned, finished handle shape and length.
Penn State Industries PKPCUTA Standard Stainless Steel Pizza Cutter Kit Woodturning Project 5pack
This is a woodturning project kit. Hardware only. HANDLE NOT INCLUDED. A LATHE IS NEEDED TO 'TURN' INTO FINISHED pizza cutter. Blanks, 1/2" drill bit,....
Includes (5) PKPCUTA Standard Stainless Steel Pizza Cutter Woodturning Kits..
This is a Turn-Between-Centers project kit. Overall length will vary depending on your own custom handle design. Minimum blank size is 1-1/2" x 1-1/2"....
Features a 4" stainless steel cutting wheel, a thumb guard, and a ferrule style handle..
Penn State Industries PKMSPN Measuring Spoon Set Kit Woodturning Project (1pack)
These are woodturning project kits. A LATHE IS NEEDED TO 'TURN' INTO FINISHED A MEASURING SPOON SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
Includes (1) PKMSPN Woodturning Measuring Spoon Set Kit..
Each set includes measuring spoon sizes 1/4 tsp, 1/2 tsp, 1 tsp, and 1 Tbs..
Uses bushing set PKMSPBU. Requires 7mm drill bit (PK7-MM) and 5/8" x 5/8" x 3-1/2" minimum blank size..
Easy to make on a pen mandrel with 7mm tubes. Chrome ring included. The measurements are marked in the metal..
Dremel 194 Rotary Tool Accessory Carving Bit- Perfect for Wood, Plastic, and Soft Metals, Silver , Teal
Dremel's versatile and simple-to-use carving bits make it easy to express your creativity..
The cylinder shape of the carving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat-bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees..
Carving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing..
Use on soft metals, plastics, and woods especially on curved surfaces.
For use with rotary tools that can accommodate a 1/8" shank size.
Penn State Industries PKGR10SS Easy Elegance Peppermill Mechanism Kit Starter Package Woodturning Project
This is a woodturning project kit. Grinder parts, drill bit, and jam chuck only. A LATHE IS NEEDED TO MAKE INTO FINISHED PEPPERMILLS. Blanks and all other turning tools and accessories are not included..
PKGR10SS includes the following: (2) Easy Elegance Peppermill Kit (PKGRIND10), (1) 2.04" Forstner Bit (FB204), and (1) 2" Jam Chuck (CJAM2X).
Mechanism (3.75" high x 2" diameter) has a ceramic grinder and 1.5" clear viewing window. Variable grind is adjusted with a knob at bottom of mechanism..
Turn the top and bottom sleeves to your desired length and profile. Minimum blank size needed to turn is 2.5" x 2.5" x 6". Turn with included jam chuck, or between centers..
Penn State Industries PKBIGSS2 Big Ben Cigar Twist Ballpoint Pen Kit Starter Package Woodturning Project
This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other....
Includes (5) Big Ben Cigar Twist Ballpoint Pen Woodturning Kits. You will receive (1) of each in Gold (PKBIG), Chrome (PKBIGP), Gun Metal (PKBIGGM),....
Also includes the bushing set (PKBIG-BU) needed to make the pens.
Features a 10mm dual tube design, a twist mechanism, and a Parker style ballpoint refill in black. Minimum blank size needed to turn is 3/4" x 3/4" x....
Big, handsome, powerfully built writing instruments. Thick barrels to show off your turning skills and material..
Wood Turning Tools Rougher Carbide Tipped Lathe Chisel Tool Bar 19.68 Inches With 14mm Straigt Edge Square Carbide Insert for Wood Hobbyist or DIY or Carpenter
❶【8 Models Carbide Cutters Inserts Satisfy All Your Demands】: Include 12mm, 15mm and 8.9mm Round, 11mm, 14mm and 15mm Square, 30mm and 28mm Diamond with Sharp Point. Supplied with Screws..
❷【Sphere Of Application】: Perfect for finish the curved, concave surfaces , hollower jobs and for general wood turning applications. This combination will give you a replacement carbide inserts for most woodturning tools..
❸【Durable Tungsten Steel Material】: Made of solid tungsten steel - Provides the best combination of sharpness and durability. It is polished to a mirror finish for smoother cutting and longer tool life..
❹【Suitable For All Levels Of Carpentry Workers】: This is a free combination suit that meets the needs of roughing and finishing cutting. Suitable for both professional carpenters and beginners..
❺ All the carbide turning inserts cutting tools are supplied with screws..
Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts
OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
