Best Home Depot Table Saws

WEN BL1028 10-Inch 28-Tooth Carbide-Tipped Professional Multi-Material Framing Saw Blade

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM.
  • Perfect for framing, trim carpentry, remodeling and more.
  • Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
  • Designed with 28 carbide-tipped teeth for general-purpose wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock

Fuller Tool 320-0755 Ogee Cut Crown Molding Cutting Guide moulding jig hanger installation corners tool trim curved 45 degree cuts for miter saws power radial table home carpentry renovation or repair

  • Simplifies the process of cutting curved crown mouldings into five easy steps.
  • Can be used with power mitre, radial and table saws.
  • Ideal for practically any home carpentry, renovation or repair projects.
  • Creates snug-fitting 45-degree cuts without having to tilt the saw blade.
  • Measures approximately: 12-1/2 in. x 4 in. x 3 in. (31 cm x 9.5 cm x 8 cm).
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

CMT P10024 ITK Plus Ripping Saw Blade, 10 x 24 Teeth, 10° ATB+Shear with 5/8-Inch bore

  • For fast and excellent rip cuts thanks to the shear angle design..
  • Use on radial arm saws, miter saws, table saws for cutting soft and hardwood..
  • 0.094 kerf thickness, 0.063 plate thickness, 20° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

Xcalibur Tooling Heavy Duty Tenoning Jig for Table Saw & Cutting Tenons - Versatile & Sturdy Woodworking Tool (Pack of 1)

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock

Atwood 87701 Fifth Wheel Landing Gear Dual Motor Switch

  • NEW GENERATION: Addition of two tool outlets, no need extra extension socket, avoid messy cords and save time.
  • CONFIGURABLE ACTUATION THRESHOLD: 30W/60W, you can select flexibly appropriate actuation threshold according to your actual condition. Prevent vacuum....
  • CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris....
  • TURN ON DELAY & SAFETY: Automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Adopting....
  • COMPATIBILITY: Supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders,....
Check Stock

WEN BL1280 12-Inch 80-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts.
  • Designed with 80 carbide-tipped teeth for fine-finish wood cutting.
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws.
Check Stock

WEN BL1248 12-Inch 48-Tooth Carbide-Tipped Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts.
  • Designed with 48 carbide-tipped teeth for general-purpose wood cutting.
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws.
Check Stock

WEN BL1040 10-Inch 40-Tooth Carbide-Tipped Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 40 carbide-tipped teeth for general-purpose wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock

WEN BL1060 10-Inch 60-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 60 carbide-tipped teeth for fine-finish wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock