UYGALAXY Linear Actuator Controller DC Motor 12V Momentary Switch Forward/Reverse Wireless Remote Control DPDT Relay for Motors
【SBR16 LINEAR RAIL】- Two 2000mm/78.8" long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
【WIDE USES】- Gross Weight: 25.35 lb (11.5 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
...monopod and other devices with 1/4 inch or 3/8 inch screw, or standard clamp, it is flexible and stable.
QR plate with standard 1/4inch screw and anti-slip rubber pad, it is easy to install your camera and keep it safe (Max Load 22 Pounds).
VERTICAL 360 DEGREE ROTATION: Composed of 3 independently adjustable boards (horizontal board, vertical board, camera loading board). The built-in stainless steel teeth disc locking design on the vertical board can be adjusted vertically 360 degrees.
HORIZONTAL 360 DEGREE ROTATION: Ball head on the horizontal supports 360 degree panning movement with calibrated precision for capturing panoramic overlapping images in horizontal direction. 5 different degree stop increments: 15°/ 30°/ 45°/ 60°/ 90°, stops around n24/ n12/ n8 / n6/ n4. It does not need to look down at the scale when shooting.
PLEASE NOTE: Please adjust the position of your camera lens before shooting: The lens node (lens optical center) must be adjusted to coincide with the axis centre of the vertical board and the horizontal board.
So the camera’s shooting node can be around a fixed point in 3D space and then the image captured by the camera can be pieced together using a software. Please refer to the picture for the adjustment method.
GUWANJI Linear Shaft Parts Kits 2Pcs SBR20-1000mm/39.4 inch with 4Pcs SBR20UU Square Type Block Bearing for Fully suppoeted Shaft Rod
2 pieces of linear rail SBR20-1000mm/39.4 inch long and 4 SBR20UU blocks, sliding blocks to be used cooperatively with rails, high precision and easy to mount dismount..
Industry-standard SBR block with high-precision linear bearing inside. The adjustment handle can adjust the tightness of the slider, standardized processing, ideal for positioning the guide rail..
Perfect combination of main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with high precision linear bearing inside..
SBR20 linear rails apply for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment, including industrial robots, cracker machines..
GUWANJI SBR20-200mm to SBR20-2200mm Linear Rail with SBR20UU Slide Blocks CNC Parts Linear Rails for Automated Machines, DIY Projects(SBR20-2200)
2 pieces of linear rail SBR20-2200mm/86.6 inch long and 4 SBR20UU blocks, sliding blocks to be used cooperatively with rails, high precision and easy to mount dismount..
SBR20 linear rails are made of good bearing steel and aluminum alloy, surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
Industry-standard SBR block with high-precision linear bearing inside. The adjustment handle can adjust the tightness of the slider, standardized processing, ideal for positioning the guide rail..
SBR20 linear rails apply for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment, including industrial robots, cracker machines..
CHUANGNENG 2PCS Linear Rail HGR20 1500mm Linear Guide Rail HGH20CA HGH20 Linear Slide Rail + 4PCS TRH20B Carriage Slider Block CNC Kit for DIY CNC Routers Lathes Mills
Linear slide kit includes 2 pieces of 1500mm/59 long HGR20 rail shafts and 4 Block Bearing.
Pre-drilled holes on the Support Rail Mounts for ease of mounting..
Professional and technical rail and block, Move smoothly without deflection, minimal wear and low noise while using..
The linear guide rail is widely used in the automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment, including industrial robots, cracker machines..
VEVOR Linear Guide Rail, 2PCS HGR20-1000mm Linear Slide Rail + 1Pcs RM1605-1000mm Ballscrew with BF12/BK12 Kit, Coupling, Slide Blocks Linear Guide Rail Set for DIY CNC Routers Lathes Mills
...el Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance. The ballscrew movement without stick-slip effect less heats up, less drive power is required..
Wide Application: The CNC linear rail is widely used in automatic and precision measuring equipment, such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for large-scale transmission equipment, including industrial robots, cracker machines, and many other machines that need precision linear movement..
3Dman GT2 Timing Belt Closed Loop Rubber Belt 200mm for Width 6mm for 3D Printer -10pcs
003cb003eUpgrade Anti-slip Version: 003c/b003eThe tooth surface of the belt is made up of specially treated tooth cloth. 20 Teeth contact with the belt, that minimizes the chance of the belt slipping..
003cb003eStable Transmission: 003c/b003eHigh precision. High-strength structural design, anti-extension, anti-jumping, make the transmission more stable..
003cb003eLong Service Life: 003c/b003eWear resistant. Anti-wear nylon tooth surface for better protection of the tooth joint and extended service life..
003cb003e Wide range of applications: 003c/b003eWidely used in 3D printers, milling machines, gear forming machines, drilling machines, CNC lathes, hobbing machines, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, and other mechanical transmissions..
003cb003eMONEY-BACK SATISFACTION GUARANTEE:003c/b003eNo slip, high transmission efficiency, and greatly improve your work. If the belt disappoints you, simply contact us and we'll rush return your purchase price. 100% satisfied..
GUWANJI 2Pcs SBR20-1200mm Slide Linear Rail with 4Pcs SBR20UU Square Type Bearings Block for Fully Supported 20mm Linear Rail Length 47.2 inch(1200mm)
2 pieces of linear rail SBR20-1200mm/47.2 inch long and 4 SBR20UU blocks, sliding blocks to be used cooperatively with rails, high precision and easy to mount dismount..
Industry-standard SBR block with high-precision linear bearing inside. The adjustment handle can adjust the tightness of the slider, standardized processing, ideal for positioning the guide rail..
Perfect combination of main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with high precision linear bearing inside..
SBR20 linear rails apply for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Gimbal Tripod Head for Camera,YELANGU Professional Heavy Metal 360 Panoramic Shooting Gimbal stabilizer for DSLR Camera with 1/4" 3/8" Quick Release Plate and Bubble Level, Up to 33lbs/15kg
➤PRECISE POSITIONING: Gimbal stabilizer for dslr camera CNC rails allow for smooth movement, fast tracking horizontally and vertically.100mm movable horizontal axis,Tripod head camera horizontal adjustment of the lens platform allows precise positioning to find the center of gravity of any size lens and camera system.Calibrated scale for repeatable positioning of lenses..
➤WIDELY COMPATIBLE: 3/8" Screw holes at the bottom of the Gimbal Head For Tripod, detachable QR plate with 1/4" screws suitable for most DSLR Cameras,Camcorders and telephoto lenses..
➤360° PANORAMIC HEAD,bird shotting and sport event shotting: Gimbal head the panning base and vertical arm are capable of 360 degree rotation (horizontal and vertical), gimbal can meet the photography demand of different angles.For moving animals like flying birds for outdoor shooting or sport event video recording..
➤standard ,NON-SKID Arca-Swiss: Gimbal for dslr non-Skid slip design on Arca-Swiss standard quick release plate.Tripod heads Includes Arca-Swiss type standard 1/4inches QR plate and Bubble Level. Non-Skid slip design on Arca-Swiss standard QR p....
