Best Hose Band Clamp Tool

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

Glarks 84Pcs 10 Size Mini Fuel Injection Style Hose Clamp Assortment Kit For Diesel Petrol Pipe

  • HIGH QUALITY ---- High quality Zinc Plated Steel hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band..
  • EASY To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
  • WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • WIDE ADJUSTABLE SIZE RANGE ----Clamp kit are flexible and ductile with wide adjustable size range from 7 to 18mm. Fit Hose Diameter: 7-9mm: 12Pcs.
  • 16-18mm: 8Pcs. So many sizes are enough for daily needs..
Check Stock

Keadic 80Pcs 1/4\-15/16\ 304 Stainless Steel Single Ear Hose Clamps Pex Pinch Clamp Assortment Kit with Ear Clamp Pincer for Securing Pipe Hoses and Automotive Use

  • 【HIGH QUALITY MATERIAL】 Made of 100% stainless steel, these clamps are corrosion resistant and anti-rust..
  • 【SPECIAL DESIGN】 Special cochlear design provides a strong thermal expansion compensation function, which compensates for the dimensional change caused by the change of the hose, so that the pipe is always in a good sealing and fastening state. Narrow band design to provide a more centralized seal pressure, the clamping effect is obvious and stronger than that of the traditional screw type clamp..
  • 【COMPLETE SPECIFICATIONS】This single ear hose clamp set covers 8 common sizes items : 6-7mm, 7-8.7mm, 8.8-10.5mm, 10.3-12.8mm, 12.8-15.3mm, 15.3-18.5mm, 17.8-21.0mm, 20.3-23.5mm, which are widely used in hoses and plastic pipes, especially suitable for beverage, automotive, marine, motorcycle, and industrial applications..
  • 【CRIMPING PLIER TOOL】An useful Ear Clamp Pincer are included in this kit, with plastic coated handle, which is convenient for your installation widely applied to single ear hose clamps, double ear clamps,etc..
  • 【RELIABLE AFTER-SALE SERVICES】We are confident enough with our products, believing that you won’t be regret if you purchase them. And if you feel confused about our products, please be free to contact me and....
Check Stock

Roadformer 3\ T-Bolt Hose Clamp - Working Range 83mm - 91mm for 3\ Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (83mm - 91mm, 2 pack)

  • Roadformer 3" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 3" T Hose Clamp Working Range: Diameter 3.27" - 3.58" same as 83mm - 91mm for 3 inch Hose I.D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in Package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

Roadformer 5' T-Bolt Hose Clamp - Working Range 133mm - 141mm for 5' Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (133mm- 141mm, 2 pack)

  • Roadformer 5" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 5" T Hose Clamp Working Range Diameter: 5.24" - 5.55" same as 133mm - 141mm for 5 inch Hose I.D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in Package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

Cimeton 304 Stainless Steel Adjustable Clamp Worm Gear Hose Clamps (19Ft Strap + 12 Strong Fasteners)

  • [Material]: The strap with fasteners are made of 304 stainless steel, it is anti-rust and corrosion-resistant. Solid and sturdy material ensures that the adjustable worm gear hose clamp is durable for use and reusable..
  • [Smooth Worm Gear Clamp]: Our fastener steel is more thicker and keeps strapping strong and heavy duty. It is not easy to bend when tightening the hose clamp. We use the best quality screws to clamp the strap tightly when turning the screwdriver..
  • [Simple Operation]: It is easy to operate, you only need a pliers and a screwdriver. You can use pliers to repeatedly bend the strap up and down and the strap will be easily cut off. Then you can make an adjustable hose clamp according to your needs..
  • [Cost and Work Effective]: Our hose clamps make it much more cost effective and flexible than ordering a variety of worm clamps. You can make band hose clamps according to your need, such as 10 inch, 12 inch and so on. It also effectively solve the problem of hose leakage and air leakage..
  • [Wide Applications]: It can be widely applied in automotive, industrial, boat, shield, electronic or home applications. It is also perfect for your duct collection dryer vent ductwork, garden fence, segmented wood turning project, pole mount bracket, automotive, ....
Check Stock

AKIHISA 10 Pcs 2 Hole U Tube Strap Clamp 304 Stainless Steel Rigid Pipe Strap Strap Clamp ID 31/64Inch(12mm)

  • ♛ HIGH QUALITY ---- High quality 304 Stainless Steel 304 hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The steel adopts hole technology makes its screw tightly bite the steel band..
  • ♛ WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • ♛ EAST To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • ♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
  • ♛ WIDE ADJUSTABLE SIZE RANGE- Clamp kit are flexible and ductile with wide adjustable size range from 14mm to 311mm/0.55-12.24 inches. So many sizes are enough for daily needs. You could free adjustment to adapt to different sizes of hose. We offer various sizes to meet your different needs, just choose the right size..
Check Stock

Swpeet 100Pcs 8-44mm Adjustable Range Assorted Sizes Assortment Hose Clamps Kit, 100% 304 Stainless Steel Adjustable Range Worm Gear Hose Clamp Perfect for Plumbing, Automotive

  • ♛ WIDE ADJUSTABLE SIZE RANGE- Clamp kit are flexible and ductile with wide adjustable size range from 8 to 44mm/0.24-1.5 inches. Fit Hose Diameter: 8-12mm: 20Pcs.
  • 21-44mm:10Pcs. With a wrench in total 101Pcs. So many sizes are enough for daily needs. Clamp’s diameter can be adjusted according to a worm gear mechanism for precisely sealing pressure..
  • ♛ HIGH QUALITY ---- High quality 304 Stainless Steel 304 hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The steel adopts hole technology makes its screw tightly bite the steel band.The hose clamp is sturdy, firm and reliable. No more worrying about rusting and cracking when installing on pipes..
  • ♛ WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • ♛ WITH A WRENCH EAST To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size ....
Check Stock

DRIVESTAR 39120 Belt Tensioner with Pulley for Dodge Ram 1500/Dakota/Durango,for Jeep Grand Cherokee/Liberty 3.7L 4.7L

  • ♛ HIGH QUALITY ---- High quality Zinc Plated Steel hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band..
  • ♛ EASY To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • ♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
  • ♛ WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
  • ♛ WIDE ADJUSTABLE SIZE RANGE ----Clamp kit are flexible and ductile with wide adjustable size range from 7 to 18mm. Fit Hose Diameter: 7-9mm: 15Pcs.
  • 16-18mm: 10Pcs. So many sizes are enough for daily needs..
Check Stock

Hose Clamps 304 Stainless Steel Worm Clamp, 13 FT Large Hose Clamp Strap with 10 Fasteners, DIY Worm Gear Hose Clamps Adjustable Pipe Hose Clamp for Plumbing, Automotive And Mechanical Applications

  • DIY Hoses Clamp: you can trim the hose clamp strap in length you just need, then insert the fastener to make a suitable size you want, no more waste any materials.
  • You will get 1 piece adjustable band hose clamp and 10 pieces fasteners, to meet your different needs.
  • Durable Stainless Steel: The whole hose clamps (including the band, fasteners and screw) are built with 304 stainless steel, water-proof, rust-proof, corrosion-resistant, strong, durable, which can be applied in indoor and outdoor..
  • Easy to Use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly. Can be applied to secure hoses, pipes, cable, tubes, automotive, industrial, boat, etc..
  • Perfect Application: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, help to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
  • Reusable Used: It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check Stock