Best Hose Barb Fitting

Hose Fitting SUNGATOR Brass Hose Barb Fitting Adapter 1/4 Barb x 1/4 NPT Male Pipe 4-Pack

  • 【PREMIUM MATERIAL】: SUNGATOR selects high quality solid brass, firm and durable, brass is corrosion resistant and can be used in wet environments, 1/4”barb X 1/4”NPT male pipe, 4 pack.
  • 【DURABLE】: The barb fitting is not a cast product and has a longer service life.
  • 【SUPERIOR THREADS】: Barbed edges provide excellent connection, deeper and smoother threads design makes work easier and more effective.
  • 【FUNCTION】: A barb (or hose barb), which connects flexible hose or tubing to pipes, one side is used to connect hoses while the other side is used to connect to NPT pipes, especially for small rubber hoses and plastic hoses as well as air tools.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Minimprover 4PCS 1/4 ID Hose Barb Thru-Bulk Head Hex Union Brass Straight Fitting with Flat Washer Gasket Water/Fuel/Air

  • ★ 【Material】: Solid Brass construction. Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ 【SIZE】: 1/4" Hose Barb x 1/4" Hose Barb.Thru-Bulk Bulkhead Fittings is connect with 1/4" ID hose with the same size..
  • ★ 【Introduction】: Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable.Bulkhead union coupling for connecting two hoses with the same diameter in a straight run.Barbed fitting for a tight seal on hoses..
  • ★ 【Applications】: The fittings are fixed with 2 Gaskets and 1 fixed six corner, 1 movable six corner nuts form bulkhead tank function.Wide range of use: suitable for applications in water,fuel,air and etc..
  • ★ 【Package Include】: 4 Pack 1/4" to 1/4" hose barb.It comes with 1 year warranty..
Check Stock

2 Pack Brass Hose Fitting Adapter 3/8 Barb x 1/4 NPT Male Pipe

  • Standard 1/4 npt to 3/8 barb for connecting a hose to a male threaded connection of a different diameter..
  • Brass material make it strongest construction for prolonged service life,Easy to use and reliable..
  • Hose barb on one end and male NPT threads on the other, no leaking and durable, easy to connect and disconnect..
  • Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads..
  • Package include 2 Pack 3/8" Hose ID x 1/4" NPT Male Pipe brass fittings..
Check Stock

Cole-Parmer VapLock Luer Fitting, PP, Straight, Male Luer Lock x 1/8\ Hose Barb; 10/PK

  • Connection Type-Port 1: Straight male luer lock.
  • Description: Luer Fitting, PP, Straight, Male Luer Lock x 1/8" Hose Barb.
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

TAILONZ PNEUMATIC Brass Hose Barb Fitting -3/8 Inch Barb to 3/8 Inch Male NPT Adapter(Pack of 5)

  • 【Product Name】Male Thread Barb Fitting【Material】 Brass..
  • 【Temperature Range】 -40°F to 160°F【Maximum Pressure】150 Psi.
  • 【Premium Material】Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion..
  • 【Typical Application】temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines..
Check Stock

TAILONZ PNEUMATIC Brass Hose Barb Fitting -1/4 Inch Barb to 1/4 Inch Male NPT Adapter(Pack of 10)

  • 【Product Name】Male Thread Barb Fitting【Material】 Brass..
  • 【Temperature Range】 -40°F to 160°F【Maximum Pressure】150 Psi.
  • 【Premium Material】Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion..
  • 【Typical Application】temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines..
Check Stock