Best Hose Barbs With Push lock

Whatman 6721-5010 Polydisc TF PTFE In-line Filter 1.0 Micron, 13 psi Maximum Pressure, 900 Flow Rate (Pack of 10)

  • Materials of Construction: Inlet-Cover, Base, and Collar Cap: Anodized aluminum, Hose Barb Adapters: Polyethylene, Support Screen and Underdrain Disc: Electropolished type 316 stainless steel, O-Ring: Viton, Thrust Ring: PTFE and Effective Filtration Area 9.6 cm2.
  • Dimensions: Overall Length (Excluding Hose Barbs): 5.7 cm (2.2 in.), Diameter: 5.9 cm (2.3 in.), and Inlet/Outlet Connections: 3⁄8 in. FNPT.
  • hose barb adapters accept 6.4 mm (1⁄4 in.) ID tubing..
  • Maximum Operating Temperature: Limited by filter type, hose barb adapters 93 °C (199 °F), or O-ring 204 ºC (399 ºF) and Maximum Operating Pressure 14 bar (1400 kPa, 200 psi)..
  • Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min..
  • Pall 47 mm In-line Lab Filter Holder, Lightweight, Anodized Aluminum Filter Holder Convenient design allows opening and closing without disrupting membrane. Designed for in-line liquid or gas filtration, Durable construction for stack sampling. Type Filter Holder.
Check Stock

UPR Products 09-18 Ram Billet Oil Catch Can Z Bracket Hemi Technology

  • NEW UPR Patented Billet Aluminum Diffuser Upgrade for Improved Oil Coalescing- Plastic Diffuser Discontinued.
  • Continental INSTA»GRIP Push Lock Braided Hose.
  • Catch Can Actual Size 4.75 inch Tall x 2.50 inch Wide.
  • 6oz. Capacity Easy open (pre-oiled o-ring) makes a simple snug to close.
Check Stock

Fuel Line 1/2 ID NBR Hose 8 AN Push on Hose 12.7mm ID 8AN Fuel Injection for Small Engines, 3 feet

  • ID: 1/2" (12.7mm), OD: 0.78 inch (19.7mm), AN8 NBR liner hose, 3 feet.
  • Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines.
  • Working Pressure 2Mpa. Burst Pressure 5Mpa, Handles temperature ranges of -40 to +275 degrees F.
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc.
  • The Fuel Lines for fuel injected systems, are oil resistant,cold-resistant and ethanol tolerance.
Check Stock

Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS

  • Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer..
  • How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on..
  • If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
  • Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings..
Check Stock

ZeroR® AC UV Dye Leak Detector R134_ R12_ R22_ - 3 Can

  • ❄ WIDE COMPATIBILITY ---- A/C can tap guage hose recharge for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with....
  • ❄ PREMIUM QUALITY ---- R134A can tap, R134A low side quick are made of aluminium alloy, for high heat resistance durability and safety..
  • ❄ EASY INSTALLATION ---- R134A gauge recharge hose has 90 degree Push & Lock coupler with auto shut off. Easy and convenient to use. Come with gauge....
  • ❄ DIMENSION ---- 1/2’’ ACME female x 1/4’’ SAE male can tap opener, 13mm R134A low pressure quick coupler, thread: female low side R134a 13....
  • ❄ PACKAGE INCLUDES ---- With 1/2’’ ACME frezon can tap, recharge Hose with gauge and R134A low side quick coupler,we can provide 12 months....
Check Stock

Aquor Wall Hydrant V2+, Frost-Free Outdoor Garden Faucet with Anti-Siphon and Quick Connect, 10 inch, Slate Gray Polymer

  • [Instant Anti-Siphon Water Access] Push and twist for immediate leak-free access to water. Hydrant “locked” without a hose connector. Built-in backflow prevention, ASSE 1019A certified..
  • [Frost Proof Faucet] 7x better freeze protection than brass spigots, frost free up to -30° F. Self-drains upon disconnection, never use a foam faucet cover for winter again..
  • [Professional Grade Materials] Body and internals 100% lead-free stainless steel. Hose connector crush-proof polymer, tested to 200+ lbs..
  • [Easy Installation] Compatible with any plumbing type, we recommend PEX. Compatible with accessories with standard 3/4 inch hose fitting..
  • What’s Included? 10 inch hydrant, 11 1/2 inch total length with 1/2 inch NPT inlet, one slate gray straight hose connector, four mounting screws..
Check Stock

Aquor Wall Hydrant V2+, Frost-Free Outdoor Garden Faucet with Anti-Siphon and Quick Connect, 8 inch, Slate Gray Polymer

  • [Instant Anti-Siphon Water Access] Push and twist for immediate leak-free access to water. Hydrant “locked” without a hose connector. Built-in backflow prevention, ASSE 1019A certified..
  • [Frost Proof Faucet] 7x better freeze protection than brass spigots, frost free up to -30° F. Self-drains upon disconnection, never use a foam faucet cover for winter again..
  • [Professional Grade Materials] Body and internals 100% lead-free stainless steel. Hose connector crush-proof polymer, tested to 200+ lbs..
  • [Easy Installation] Compatible with any plumbing type, we recommend PEX. Compatible with accessories with standard 3/4 inch hose fitting..
  • What’s Included? 8 inch hydrant, 9 1/2 inch total length with 1/2 inch NPT inlet, one slate gray straight hose connector, four mounting screws..
Check Stock

Plastic Quick Connect Male/Female Coupling Connector 3/16'' Hose Barb Insert 3 Set/Pack

  • Quick-Disconnect Fittings, Straight-Through Hose barbs.
  • Suitable for 4mm-5mm Inner Diameter Tube.
  • Subject Material: POM Sealing ring material: EDPM.
  • Suiltable for a wide variety of applications in pharmaceutical, food and beverage, labaratory, chemical.
Check Stock

Dixon BPM4 Brass Push On Fitting, Hose Mender, 1/2\ Hose ID Barbed

  • Push-on fittings are intended for use with lok-on (push-on style) hose only.
Check Stock

HIYITKS Air Chuck with Clip Adapter, Brass Locking Tire Inflator Nozzle Adapter Connect, No Leakage 250 PSI Tire Chucks for Vehicle Inflator Compressor Pump ConnectTool

  • ️[ No Leakage & High Efficiency ]: Just press down locking clip on tire inflator, push or twist HIYITKS tire air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator chuck gives you a great seal on the tire valve, it is great Air tire inflator nozzle Hose Adapter accessory..
  • [ Premium HIYITKS Tire Air Chuck With Clip Adapter ]: Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • [ Universal Fitment ]: 8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, Inflator Air nozzle fit for a host of vehicle tire inflator tire pump adapter , like bike, motorcycle, truck,car tire fill etc..
  • ️[ Precise Design ]: It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
  • ️[ Easy To Operate ]: Plugs open flow HIYITKS air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
Check Stock