3 Sets 5/8 Inch Brass Garden Hose Repair Kit Mender End Water Hose End Mender Female and Male Hose Connector with 6 Pieces Stainless Steel Clamp
About size: the brass garden hose mender’s diameter is approx. 15.0 mm/ 0.59 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before purchasing.
Material: the materials of hose mender and clamp are rustproof and solid, you can use them for a long time, the hose mender is made of quality brass, the clamp is made of stainless steel.
Simple installation: you just need to install these garden hose end replacement by hands, no complicated process, using the stainless steel clamp with hose mender can effectively avoid leakage.
Widely applying: these garden hose end replacement are suitable for using with water faucet, sprayers, garden hose and so on as long as the size matches, helping you solve some problems about repair.
Package information: come with 3 sets brass garden hose mender and 6 pieces stainless steel tightening clamp for you to use or replace, it’s good choice for your backup tool of hose mender.
Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)
DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
abcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets
Standard 5/8″ hose connection — The brass garden hose mender’s diameter is approx. 14mm/ 0.56 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before placing an order. Brass connector with the stainless tightening clamp you can make it tightly as you want. Work with your garden hose, sprayers, nozzle, etc..
Wide applications — This hose end replacement kit can be use to garden hose mender, end hoses male mender, end hoses female mender, hose repair mender. You can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc..
Easy to Use — This garden hose adapter use to repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
Hose clamp pliers set for use while repairing coolant, brake, and fuel systems as well as vacuum and other lines. Not for used on rigid, reinforced, or high pressure lines..
This hose clamp pliers set is made from durable glass reinforced nylon, is durable enough to get the job done.Temperature resistance of up to 160 °C.
Smooth rounded jaw edges and adjustable locking ring locking function can squeeze the hose against the stable surface over a wide area without damage the hose.
Ergonomic designed handle for comfortable grip and easy use..
304 Stainless Steel Hose Clamp Assortment Kit DIY Cut-To-Fit 12 FT Metal Strap + 8 Stronger Fasteners Large Adjustable Worm Gear Band Hose Clamps Screw Clamps Duct Pipe Metal Clamp Strapping
DIY Hose Clamps: Our hose clamp assortment is an awesome kit for you to determine your own size of worm clamps. Anytime to get odd sizes 2.5'' or extra large 45'' which are rare to find in the local stores..
Super Easy To Use: In our second image or package, you could please read the instructions. 30 seconds to 1 minute fast setup! If you do not have a snip on hand, DON'T WORRY! Please use a plier to bend the metal hose clamp strap back and forth, it will be cut easily. A nut driver for our screw clamp with 5/16'' hex head is available..
Cost Effective: No longer need to stock different sizes of pre-made stainless hose clamps. It is more flexible to make hose clamp large as 14 inch 16 inch 18 inch 20 inch 24 inch 30 inch 40 inch! The standby materials come in handy for future projects!.
Hose Clamps Stainless Steel: 12 FT strap and 8 PCS fasteners are all made of high quality 304 stainless steel, NOT 201 SS. These worm gear clamps will last forever, reusable, anti-rust and anti-corrosive, very suitable for outdoor use!.
No Jamming No Slipping Fasteners: The steel sheet of our hose clamp fasteners is thicker! It keeps the stainless strapping strong and heavy duty. The screw grips the strap band tightly so that the band clamp can be tightened! The worm driv....
HIGH QUALITY- The single ear hose clamp is made of premium raw material 304 stainless steel and has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. The hose clamp stainless steel 304 has good workability such as stamping and bending, and no heat treatment hardening phenomenon. This crimp clamp can be used for a long time..
360° STEPLESS DESIGN- No bulge and gap in the inner ring of the stainless steel hose clamps. Narrow band design provides more concentrated sealing pressure. The special treatment of the edge of the clamp reduces the possibility of damage to the clamped parts. This ear clamp is light weight and obvious clamping effect..
WIDELY USED- Standard series of spring clamps are suitable for connection of pipe fittings.
Using hose clamp pliers can perfectly connect the pipe to the any brand of crimp pipe fittings or tubing..
SHARP PLIERS- The small head design allows for good access in a limited area without damaging the pressure points on the ear clamp. The hose clamp plier is sharp but won't damage, rubber handle grips for a sure hold the clamp. Great length on handles, strong and well built..
ONE-STOP SERVICE- High-quality, high stability. If you have any issues at all with this product, our cus....
8 Size Heavy Duty Ratcheting Hose Clamp 6.1-26.1mm Adjustable Speedy Double Snap Grip Nylon Plastic Hose Clamp 68PCS Black
【Superior Quality:】All the plastic hose clamp all made of high quality nylon material, which with high strength and high hardness, strong corrosion resistance. Durable enough for long time service than nomal hose clamps.
【Hose Clamp Size:】This hose clamp kit contains 8 different sizes: 6.1-6.6mm, 8.1-8.6mm, 9.0-9.9mm, 12.3-14.4mm, 13.9-15.7mm, 16.3-17.9mm, 21.5-23.5mm, 24.5-26.1mm, totally 68 Piece. Packaged into a plastic grids box, each size package into a grid separately, won’t mixed together.
【Adjustable Style:】These snap grip hose clamps with two row of teeth, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
【Easy to Installation】No tools needed for install. Simply to clamp it to the hose tail, and then engage teeth initially by hands. You could adjust the size (radius) of the hose clips to the size you need.
【Widely Application】This hose clamps set total include 68pcs 8 size black double gripping hose clamps, Perfectly used for air hose, water pipe, automotive fuel line, silicone hose, etc. which are edges smooth will not hurt the pipe, perfect for va....
Selizo 12Pcs Hose Clamps 4 Inch Hose Clamp 304 Stainless Steel Hose Clamps Duct Clamp Worm Gear Adjustable 91-114mm Hose Clamp Fuel Line Clamp for Plumbing Automotive and Mechanical Applications
PACKAGE INCLUDES: The stainless hose clamp kit comes with totally 12 pieces hose clamps with adjustable size range from 91 mm to 114 mm, perfect for hose outside diameter 91-114mm / 3.6-4.4 inch.
304 STAINLESS STEEL HOSE CLAMP –The hose clamp is made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
FLEXIBLE ADJUSTABLE SIZE RANGE – The 4-inch hose clamps stainless steel can be adjusted from 91-114mm / 3.6-4.4 inch. Flexible and ductile for use.
EASY TO INSTALLL AND REUSABLE – The stainless clamps designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. The clamp hose also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
WIDELY USED – The spring hose clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications.
yeesport Vise Grips Locking Pliers 3PC,Hose Clamp Pliers,Remover Kit with Long Reach Wire Spring Hose Clamp Pliers for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps
Professional Hose Clamp Pliers Set of 3: The is a set of 3 pairs of hose clamp pliers, including long reach wire spring hose clamp pliers, 45-degree angled hose clamp pliers, and flat band hose clamp pliers. The maximum opening sizes of these 3 pairs of pliers are 2.4in, 2.8in, and 0-2.2in, respectively, meeting different needs..
Rotatable Pliers Head & Spring Gear Lock: The pliers heads of the 45-degree angled clamp pliers and the flat band one can be flexibly rotated to handle hose clamps of various angles. The opening size of the pliers can be adjusted by the spring lock, and the gears are engaged to keep the opening, which is convenient and labor-saving..
Forged From Hardened Steel: Forged from steel with high hardness by hardening and black electroplating, the pliers heads are sturdy against rusting and corrosion. The spring clamping mouth is made of quality elastic material, which deforms under external force and returns to its original shape after removing the external force..
Comfortable Non-slip Rubber Handle: The handles adopt an ergonomic design, which will not slip during use, and the rubber covering makes them comfortable to hold so you won't feel your hands sore and fatigued easily, perfect for long-term work. Besides, the spring locking s....
