Best Hot Dip Galvanized Trailer

osemar Boat Trailer Side Guides Roller Guide On System

  • Make loading your boat easier in bad weather: Use these roller guides to keep your boat centered during loading despite wind and waves, making it easier to load your boat..
  • Easy and fast installation: Trailer guides can be mounted on top or under the frame, and combination of long bolts and base plate can fit frames of different volumes..
  • Say goodbye to rust and breakage worries: Galvanized steel coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding..
  • Don't worry about your boat getting hurt: Black rubber rollers with end caps protect your boat's surface..
  • Adjustable Width: 97° arms and 13" roller assembly.
  • up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment, 6" bolt kits are available for trailer frames up to 5" tall..
Check Stock

Post Support Saddle Bracket Holder for 3.5'x3.5' Posts, 13G Hot Dip Galvanized #354 (16 Pack)

  • Connect 3.5"x3.5" wooden posts to concrete footings for deck supports..
  • Saddle for 3.5"x3.5" wood post. 7" Stem - 15mm Rebar..
  • Easy to install, perfect for contractors and DIY installations.
Check Stock

Crosby 1018473 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 3-1/4 Ton Working Load Limit, 5/8\ Size

  • forged-quenched & tempered with alloy pins.
  • can be used in tie down, towing, suspension or lifting applications.
Check Stock

Crosby 1018491 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 4-3/4 Ton Working Load Limit, 3/4\ Size

  • forged-quenched & tempered with alloy pins.
  • can be used in tie down, towing, suspension or lifting applications.
Check Stock

TEMCo 10 Lot 1/4\ Chain Slip Safety Latch Hook Clevis Rigging Tow Winch Trailer Grade 70

  • Chain Size: 1/4" / Clevis Pin Diameter: 0.365".
  • Working Load Limit (WLL), DO NOT EXCEED: 2750 lbs.
  • Material: Forged Steel. Coating: Hot Dip Galvanized Bow, Painted Enamel Pin.
  • Includes: Hook, Latch, Clevis Pin, Cotter Pin. Color: TEMCo Blue.
Check Stock

TEMCo 4 Lot 5/8\ Chain Slip Safety Latch Hook Clevis Rigging Tow Winch Trailer Grade 70

  • Chain Size: 5/8" / Clevis Pin Diameter: 0.75".
  • Working Load Limit (WLL), DO NOT EXCEED: 13,500 lbs.
  • Material: Forged Steel. Coating: Hot Dip Galvanized Bow, Painted Enamel Pin.
  • Includes: Hook, Latch, Clevis Pin, Cotter Pin. Color: TEMCo Blue.
Check Stock

US Cargo Control 1/2 Inch x 6 Inches Galvanized Jaw and Jaw Turnbuckles

  • Working Load Limit: 2,200 lbs. | Made for in-line or straight pull applications only.
  • Hot dip galvanized for durability and weather resistance | Designed to ASTM F1145 specifications.
  • Features a jaw on each end which is fitted with a nut and bolt or a pin & cotter pin assembly.
  • M= 20 | N= 13 | BB= 6 | A= 0.5 (All Measurements in Inches).
Check Stock

BALAVA Dock Cleat 4 inch Galvanized Iron Rope Cleat Boat Cleats with Fasteners, Boat Dock Cleats Ideal for Marine,Deck,Home Decor (8 Pack)

  • 【DURABLE AND WELL MADE】These boat dock cleats 4 inch are made from rough cast hot dip galvanized iron, anti rust, corrosion resistant .They can resist the bad weather, so that you can use longer..
  • 【EASY TO INSTALL】Hexagonal hole concave groove is easy to install, bolt will stay in place when securing the cleats,provide a secure tie-down for your boat.dock cleats 4 inch contains fasteners(screw size:M5×1.26in),this means you don’t need to buy any other accessories..
  • 【PRODUCT SIZE】Dock cleats with hardware 4 inch(L) and 7/8 inch(W) 1-1/8 inch (H). about 7.5/8 inch center to center measurement of the holes..
  • 【WIDE RANGE OF USES】Boat cleats 4 inch galvanized rope cleats perfect for maritime decor,such as decks, piers for tying up boats, kayaks, jet ski's,RV,truck,caravan,etc..
  • 【DIY】Galvanized boat cleats also ideal for home decor, boat cleat hooks for towels, tying down curtains, you can use your creativity to DIY..
Check Stock

Extreme Max 3006.6719 Complete Slip Ring Anchor Kit with Rope / Anchor Chain / Shackle - #10 / 5 lbs.

  • Complete Slip Ring Anchor Kit includes anchor, 100' anchor line, anchor chain and shackle.
  • Well-suited for use in mud, sand or gravel bottoms.
  • Slip ring shank makes for easy retrieval of stuck anchors.
  • Arc-welded, hot-dip galvanized steel construction.
Check Stock

MTB Galvanized Hardware Cloth 24 Inch x 25 Foot -1/2 Inch x 1/2 Inch 19GA

  • PREMIUM LONG LASTING QUALITY Our heavy duty hardware cloth is made using high quality material and hot dip galvanized after welding to ensure long-term use. Ideal for making outdoor welded wire mesh roll fences, tree and plant garden raised bed guards supports, drains, gutters, window, chicken coop poultry cage and pen, safe fence and enclosure for pets and small livestock, lawn netting and more!.
  • ECONOMY & STURDY: Durable and solid welded mesh provides heavy duty construction..
  • SIMPLE & CONVENIENT: Our hardware cloth is designed with different gauge sizes and different mesh sizes while staying flat and straight making it easy to install and trim to your desired size for various applications..
  • SIZE & LENGTH: 19 gauge steel wire with 1/2"x1/2" mesh opening. Measures 24-inch width by 25 feet length giving you enough to make a wire fence..
  • THE RIGHT PROTECTION: The galvanized smooth wires with 1/2 inch mesh size keeps safe protection to animals and plants..
Check Stock