uxcell Mini Hot Glue Sticks for Glue Gun 0.27-inch x 4-inch Dark Green 12pcs
4 inch long and 0.27 inch diameter hot glue sticks fits most of glue guns on the market..
EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
uxcell Mini Hot Glue Sticks for Glue Gun 0.27-inch x 4-inch Light Blue 12pcs
4 inch long and 0.27 inch diameter hot glue sticks fits most of glue guns on the market..
EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
uxcell Mini Hot Glue Gun Sticks 11-inch x 0.44-inch for Glue Guns, Yellow 5pcs
11-inch long and 0.44-inch diameter hot glue sticks fits most of glue guns on the market..
EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
uxcell Mini Hot Glue Gun Sticks 8-inch x 0.27-inch for Glue Guns, Yellow 10pcs
8-inch long and 0.27-inch diameter hot glue sticks fits most of glue guns on the market..
EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
ZEUSFIRE 97PCS Dent Puller Kit, Paintless Dent Repair Kit with Golden Lifter, Slide Hammer T-bar Dent Puller, Bridge Puller, Suction Cup and Glue Gun for Car Dent Remove (97PCS)
...er kit is Suitable for both green hands and professionals. The dent repair tools are designed simply. Most of the dents can be removed within 30 minutes. The dent removal kit comes with a repair introduction. Don't hesitate to get in touch with us If you have any problems.
Paintless Repair: It is entirely paintless dent removal. The dent puller pulls out the dent of the strong stickiness, and the hot melt can be wholly removed without damaging the paint. The bottom of the bridge puller and dent lifter are made of rubber and will not damage the original paint. Tips: Recommended for cars with original paint, we are not recommended to use the repair kit if your paint gets damaged before you repair the dent.
2 IN 1T-bar Puller: Different from other T-bar pullers in the market, our set comes with 2 different big puller lines, fit with bigger dents. Meanwhile, The remover can be detached into a short T-bar puller, with 50 glue tabs, which can solve most dent problems we meet.
Widely Used: 1 Bridge dent puller, 2 in 1 T-bar Puller, 1 gold dent lifter, 3 different size dent pullers, 1 metal tap down the pen, and 1 rubber hammer, co....
uxcell Mini Hot Glue Gun Sticks 8-inch x 0.27-inch for Glue Guns, Yellow Clear 20pcs
8-inch long and 0.27-inch diameter hot glue sticks fits most of glue guns on the market..
EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Stardust Micas Pigment Powder Cosmetic Grade Colorant for Makeup Soap Making Dyes Nails DIY Crafting Projects Bright True Colors Stable Mica Batch Consistency Green Pine
MICA PIGMENT POWDER - Green Pine mica pigment powder for resin.
SOAP MAKING PIGMENT - Color true in cold and hot process, melt and pour soap making, for cosmetics, makeup, sugar scrubs, wax melts, fingernails,....
Edge Supply Walnut Preglued 1\ X 25' Roll Wood Veneer Edgebanding - Iron on with Hot Melt Adhesive. Sanded to Perfection. Easy Application. Made in USA.
...LEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple 1/2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great ....
