Best Hot dipped Galvanized U bolt

GardenMate 50-Pack Anti-Rust 6 Inch 11 Gauge Round-Top Heavy-Duty U-Shaped Garden Securing Stakes/Spikes/Pins/Pegs - Hot Dipped Galvanized Sod Staples for Anchoring Landscape Fabric

  • HEAVY DUTY: 50 pack, 11 gauge, 6"x1"x6" Commercial/Professional Grade hot dipped galvanized sod staples made from 11gauge/2.9mm thick carbon steel....
  • ROBUST: Trapezoidal U-shaped design for additional tension in the soil, galvanized for extra rust protection and long-term durability.
  • SHARP END: Bevelled endings for quick and secure mounting in the ground.
  • COUNTLESS USES: Suitable for anchoring of landscape fabric, ground tissues, hoses and cables and many other applications.
  • PREMIUM QUALITY: from trusted German brand GardenMate.
Check Stock

20 PCS Steel L Right Angle Bracket 3⅝\L x 3⅝\H x 2⅜\W Metal Joint Thickness 2mm Max.Load 22LB Strengthen Design Corner Brace for Wood Shelves, Furniture, Cabinet(Silver), Screws not Included

  • Heavy Duty 90° L Bracket Material: Cold Rolled Steel + Hot Dip Galvanized.
  • Length: 4¾"(120mm), Height: 3⅛"(80mm), Width: 4"(100mm), Thickness: 4.6mm.
  • 5 Mounting Bolt Holes: Φ13mm, accept 1/2" Bolt.
  • Max Load Capacity: 180 lb(82kg). Weight: 1.57lb(710g)-1 pack, 3.25lb(1.48kg)-2 pack.
Check Stock

GenExhaust Universal Generator Exhaust System Double Layer Wall Attachment for 1-1/2" ID Steel tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

GenExhaust Universal generator exhaust system double layer wall attachment for 1" ID steel flex tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

Sturdy Built (4) 8\ Galvanized Swivel Top Bunk Bracket Kit with Hardware for 2x3 Boat Trailer Crossmember

  • Heavy duty 11 gauge galvanized bracket construction. Ideal for freshwater and saltwater boat trailers.
  • Complete Kit: Includes galvanized and zinc plated mounting hardware as pictured. This kit is put together to be ready to assemble out of the box on your trailer cross members and secure your bunk boards to the swiveling tops.
  • The Included U Bolts fit around a 2 inch wide by 3 inch tall cross member. The U Bolts measure 1/2" in diameter, 3" wide, by 3 5/16" long..
  • This Swivel Top style bunk bracket is the industry standard 8" height with slotted holes for multiple height adjustments.
  • The adjustable top bracket on this style bolster support allows you to align the angle to contour to your boats hull.
Check Stock

Sturdy Built (4) 8' Galvanized Swivel Top Bunk Bracket Kit with Hardware for 3x3 Boat Trailer Crossmember

  • Heavy duty 11 gauge galvanized bracket construction. Ideal for freshwater and saltwater boat trailers.
  • Complete Kit: Includes galvanized and zinc plated mounting hardware as pictured. This kit is put together to be ready to assemble out of the box on your trailer cross members and secure your bunk boards to the swiveling tops.
  • The Included U Bolts fit around a 3 inch wide by 3 inch tall cross member. The U Bolts measure 1/2" in diameter, 3" wide, by 4 5/16" long..
  • This Swivel Top style bunk bracket is the industry standard 8" height with slotted holes for multiple height adjustments.
  • The adjustable top bracket on this style bolster support allows you to align the angle to contour to your boats hull.
Check Stock

BRUFER 98201 Wire Rope Clamp Clip for Cables Zinc Plated - 1/8 inch - Bulk Pack of 40 Pieces

  • Made of Electro-Galvanized iron with zinc plating.
  • U-shaped bolts with saddles and bolts on either side.
  • Used to help keep wire rope or cable in place and for forming a loop end for temporary cables and wire rope.
  • Must have item for rigging rope, wire and cable.
  • Each rope clip includes a u-shaped bolt, a saddle and two nuts.
Check Stock

Flexsto Landscape Staples, 8

  • [Size]The landscape fabric staples are 8 inches long, 1.5 inches wide and 0.11 inch in diameter..
  • [Material]Hot dipped galvanized steel with a thick layer of coating that won't rust. Lightweight yet strong commercial grade nail anchoring screw spikes that can be re-used for staking over and over..
  • [Easy to install]Sharp tipped pilot ends help u-pins with ground penetration. A rubber mallet should only be required for tough soil or gravel..
  • [Widely Application]8-inch-length is perfect for all your outdoor landscapes, patio, home, and landscaping projects.
  • Bulk quantity of pins provides enough pin stick fasteners for backyard landscapers..
  • [Multiple use]Flexsto Anchoring Pins can widely Use in the landscape, sod, lawn or garden to pin down items espacially in fabric, edging, chain link fences, holiday decoration wire, drip irrigation tubing, floral decor,square footage,chicken wire and dog fences..
Check Stock

ROHN 25SS040 40′ Self-Supporting Tower, No Ice

  • INCLUDES: (3) ROHN 25G STANDARD 10′ SECTIONS, (1) ROHN 25AG2 STANDARD 9′ 9″ TOP SECTION, (1) ROHN SB25G5 5′ SHORT BASE FOR EMBEDMENT IN CONCRETE, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 25G SELF-SUPPORTING TOWER SPECIFICATIONS.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4″ OD, 16 Gauge legs 5/16″ OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4″ equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. Note that the short concrete base can only be connected one ONE end. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24″ OD x 2.08″ ID Overall length is 9’9″ – see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

4 Pack 4inch Heavy Duty Boat Cleat/Galvanized Cast Iron Dock Cleat for Marine or Decorative Applications

  • ☺ Heavy duty rough cast hot dip galvanized iron:Anti rust, corrosion resistant, they can resist the bad weather, so that you can use longer..
  • ☺ Wide footprints to enhance strength: The large chassis can support the pushing and pulling of canoes or canoes on the water. Please rest assured that your ship is firmly tied to the dock..
  • mounting hole center to center is 0.85 inches.
  • ☺Simple installation: Hexagonal hole concave groove is easy to install, and bolts are left in proper position when fixing the splint. This eliminates the need to hold the bolt in one hand and tighten the bolt with the other hand. Note: fasteners are not included,fit for M6 x 60mm or M6 x 80mm..
  • ☺ Versatile: They are suitable for all kinds of ropes and docks, so you can easily attach your boat to the dock or dock.
  • they are also the perfect choice for home decoration, whether they are used as towel rails, curtains, or just to give the interior of your home a sense of ocean - these splints will look great and match your expectations!.
Check Stock