Best Hss Round Die Stock

ZOENHOU 2 Set 4 Inch 102 mm Hole Saw with Heavy Duty Arbor, Hole Cutter HSS Bi-Metal, Heavy Duty Steel Blade Hex Shank Drill Bits Smooth and Fast Cutting of Wood, Iron, Hard Plastic, Galvanized Pipe

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.44 inch hex shank arbor with 2 pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling the saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL - This complete HSS hole cutter including 2 pieces 4-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.44 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 4-Inch 102 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our top priority..
Check Stock

TREND DWS/KIT/B Diamond Whetstone Honing and Polishing Kit for Sharpening Router Bits and Chisels

  • MONOCRYSTALLINE DIAMOND: Allows fast, clean stock removal as your sharpen your tools.
  • IDEAL USES: Perfect to hone plane irons, chisels, and TCT or HSS router bits.
  • CONTINUOUS DIAMOND: 1000 grit side prevents diamond and nickel lift, giving more effective anti-corrosion and prevents snagging on smaller tools.
  • HONING GUIDE: Ensures correct angle is maintained on chisels and plane irons when used with diamond whetstone.
  • INCLUDES: 2x3-inch diamond bench stone with 1000 and 300 grit.
  • Honing guide with precision brass roller and setting....
Check Stock

Blacksmith Forging Tools Knife Making Tongs Set Fire Tongs Anvil Blacksmithing Tongs Forge Tools Includes V-Bit Bolt Tongs, Wolf Jaw Tongs, Flat Tongs, Blade Tongs (Pack of 4)

  • Bolt Tongs: Designed with deep V Groves in the jaws to ensure your flat stock stays deadlocked while providing heavy hammer blows. Extremely versatile and effective in respect to holding 5/8'' square and round stock..
  • Blade Tongs: This allows you to clamp the knife in various positions when drawing out the blade. Sturdy, durable, and versatile these tongs will handle a variety of stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide..
  • Flat Tongs: For 1/4 inches Flat Stock. It's superior to pliers or vise grips for holding hot metal (forgings) since Flat tongs have large flat smooth jaw surfaces that do not scratch the workpieces..
  • Wolf Jaw tongs: Designed for holding a variety of stock sizes including Flat, Square, and Round stock. Perfect for the needs in the shop, at home, or in the field and essential in many situations. One of the tongs commonly used by blacksmiths..
  • Heavy Type Steel Construction: Sturdy and durable steel craft, finished with non-slip wax to protect from rust and corrosion for long-lasting reliability. Round stock providing the user with a comfortable grip. All tongs measure approximately 15.16 to 16.26 inches making them easy to operate in addition to keeping your hands a safe distance from the forge when removing steel. Spe....
Check Stock

Knife Making Tongs Set Bladesmith Blacksmith Knife Tong Anvil Vise Forge (4 Tongs)

  • 【Professional-Grade Steel Jaws】These tongs are forged with heavy-duty steel and finished with linseed oil to protect from rust and corrosion. They can fully articulate and supply exceptional vise gripping strength on the work-piece during heavy hammer bufftes..
  • 【Flat Tongs】Flat Tongs For 1/4 inch flat stock. The jaws of the pliers have a smooth surface that will not scratch the workpiece..
  • 【V Bit Tongs】Designed to hold 5/8'' square and round stock. Designed with a deep V Grove to ensure that your buttstock remains deadlocked while being able to withstand heavy hammering. Extremely versatile tongs..
  • 【Blade Tongs】For flat stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide. Designed to hold the majority of stock sizes according to knife making..
  • 【Wolf Jaw tongs】Designed for holding a variety of stock sizes including Flat, Square and Round stock. Offering a superior grip. It is very suitable for reaching inconvenient areas and is essential in many cases..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

  • 1.Material:Cr12, Rockwell Hardness = 40 HRC.
  • 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
  • 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
  • 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
  • 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.
Check Stock

LittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)

Check Stock

SWAG Off Road Tubing Roller Dies Compatible With Harbor Freight Tube Roller 2.00 Square Dies

  • We currently have 67 different Die Sets in stock.
  • Each die set is 100% CNC machined out of 1018 steel for a precise fit.
  • Due to many operator controlled variables there is no warranty on our dies.
  • PLEASE SEE RECOMENDED UPGRADES IN THE DESCRIPTION BELOW.
Check Stock

DLOECBT 7inch Round Led Headlight Compatible with Jeep Wrangler JK TJ LJ CJ ,High/Low Beam Amber Turn Signal lights,Halo Ring Angle Eyes ,Pack of 2

  • 【Extremely Bright & DOT E9 MARK】7inch headlights are made with original import LED Chips, 100% brighter than original halogen and HID.The cut off....
  • 【Four Lighting Modes】5500LM @ high beam,[email protected] low beam, Halo White daytime running light (DRL) and Halo amber turn signal light..
  • 【High Quality & Heat Dissipation】 Solid Die-Casting Aluminum Base Housing & clear Lens, maximum protection for headlight from minor abrasions.....
  • 【Easy Installation】It is Plug and Play for most modes with 7” round stock headlights,Coming with H4 to H13 adapter. Making installation is quick....
  • 【Application】Compatible with Jeep Wrangler TJ 2 Door 1997~2006: For Jeep Wrangler LJ unlimited (4 Door) 2004~2006: For Jeep Wrangler JK 2 Door 2....
Check Stock

Drillco 2000R Series 63 Piece High-Speed Steel Tap and Carbon Steel Round Adjustable Die Set, Uncoated (Bright) Finish, UNC and UNF Thread

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Set includes : 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4″-20, 1/4″-28, 5/16″-18, 5/16″-24, 3/8″-16, 3/8″-24, 7/16″-14, 7/16″-20, 1/2″-13, 1/2″-20, 9/16″-12, 9/16″-18, 5/8″-11, 5/8″-18, 3/4″-10, 3/4″-16, 7/8″-9, 7/8″-14, 1″-8, 1″-12, and 1/8″-27, 1/4″-18.
  • Comes with 1-inches & 2-inches round die stock, #7 to 1/2-inches & 1/4-inches to 1-inches adjustable tap wrench, #0 to 3/8-inches t-handle tap wrench and 2 screwdrivers.
  • Comes in an attractive, hand made, wooden case.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Check Stock