Best Hub Spacer Rings

Abrillvt 5X115 Wheel Spacer 12mm 2PCS Wheel Adapter Compatible with for Century 90-05 for Park Avenue 00-05 for STS 05-08 for Allante 87-93

  • 5 LUG WHEEL SPACER ADAPTER FITMENTS -- WHEEL SPACERS 5X115 Fit for Vehicles: 1990-2005 for Century| 1985-1989 for Electra| 2005-2009 for LaCrosse.
  • Fit for Vehicles: 1987-1993 for Allante| 2003-2007 for CTS| 1985-2005 for DeVille| 2006-2008 for DTS.
  • Fit for Vehicles: 1984-1989 for Celebrity| 2005-2011 for Equinox| 2000-2008 for Impala. If you have any questions please feel free to contact us.(The upper left corner).
  • WHEEL ADAPTERS & SPACERS 12mm POSITIVE FACTORS -- Wheel Spacers can be used to widen the stance of the vehicle and give additional clearance on the inner portion of the wheel for brake and suspension components. Moving the wheels outboard increases the track width of the car. The increase in track width also lowers the roll centre of the car and therefore increases the amount of cornering force that the car is able to carry through its tires..
  • 5X115 WHEEL SPACERS 12mm SPECIFICATIONS -- 5 Lug Wheel Spacer Kit Thickness: 12mm| Vehicle Bolt Patter: 5X115 (vehicle)| Wheel Bolt Pattern: 5X115(wheel)| Center Bore: 70.3mm| Hub centric: YES| Quantity: Two(2)| Color: Silver.
  • WHEEL ADAPTERS PREMIUM QUALITY - Abrillvt's wheel spacers reduce rust problems, comes pre-installed with heat-treated and hardened grade 10.9 bolts, and is exceptionally strong an....
Check Stock

Ring Size Adjuster for Loose Rings - Invisible Spiral Transparent Silicone Ring Guard Clip Jewelry Tightener Resizer Set for Making Jewelry Fitter, Sizer, Guard, Spacer (8 Pack, 4 Sizes )

  • ...e variety of rings, so don’t worry about the size not fitting. It is the perfect ring size adjuster, perfect for loose rings, preventing rings from slipping off your fingers. YOU DESERVE TO HAVE.
  • SUPER EASY TO USE : Firstly , place a ring adjuster on the bottom of the ring and twist to secure, wrap around the ring spacer to create more loops, then trim off the excess. Our Invisible Ring Guards stay well on the rings and no feeling on your ring and finger when using it. DEPEND ON YOUR NEEDS TO CUT AND FIT YOUR RINGS..
  • WIDE APPLICABILITY & MULTIPURPOSE :The ring spacer fits Ring Width from 1mm to 10mm, specifically women’s and men’s rings. Such as brick ring,jade ring,open ring,thin ring,wide ring ect, prevent your ring from being too big and easy to lose. At the same time, our ring adjusters can also be used as key rings, pendant aids, hair ties, etc..
Check Stock

MOMO Steering Wheel Hub Adapter compatible with 98-05 3 Series E46 323i / 325i / 328i / 330i

  • Brand new in the box, 100% authentic MOMO product. Made from the finest high grade aircraft quality steel & aluminum..
  • This replaces your factory steering wheel, then you can install any MOMO steering wheel to your vehicle. May lose horn or cruise control function. Offroad use or racing use only on the vehicles equipped with airbags..
  • All the instructions and hardware are included with this product. Includes hub adapter, black rubber cover, screw kit, hex key wrench, horn ring, and any horn wires you will need for for vehicle, used for racing and off-road purpose..
  • This hub adapter will fit most 6 lug 2.75" (70mm) aftermarket steering wheels, such as MOMO, Isotta, Sparco, OMP, NRG and many others. REMARK: 1. If the hub is too short, you would need to add the steering wheel hub spacer (sold separately) 2. We cannot guarantee the horn can be reused in some of the aftermarket steering wheel setup..
  • Vehicle Application: 1998 1999 2000 2001 2002 2003 2004 2005 BMW 3 Series 323i / 325i / 328i / 330i NEW 3 SERIES, RACING ONLY.
Check Stock

20mm (0.75 inch) Hubcentric 5x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan Infiniti G35 G37 Q50 Q60 Q70 FX35 FX50 350z 370z Altima Maxima 300zx Sentra - Black 66.2mm 2pcs

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 66.1mm Centerbore. Compatible with Nissan 240SX (non Base Model), 300ZX, 350Z, 370Z. Compatible with Nissan Altima, Maxima, Murano, Rogue, Sentra. Compatible with Infiniti FX35 FX45 FX50 G35 G37 I30 I35 J30 M45. Compatible with Infiniti Q45 Q50 Q60 Q70 QX60 QX70. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if vehicle is listed as compatible, buyers still need to check: 1) Wheel studs are M12x1.25 12x1.25mm.
  • 2) You have 3/4" (20mm) of space between your fender and your wheel/tire. [IMPORTANT] The included lug nuts, along with your OE wheel studs, will extend past the surface of the spacer. The back of your wheels NEED to have pockets/cavities (at least 2" wide & 1/2" deep) to accomodate for this. You will also likely need to trim your OE studs..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 3/4" (20mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 66.1mm | Lip Diameter: 66.1mm | Stud/Nut Thread Pitch: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface cor....
Check Stock

Ring Size Adjuster for Loose Rings 8 Pcs, Ring Guards for Women, Ring Sizers for Spacers Tightener Resizer, Unique Groove and Fastening Ties Design Fits Rings of Width Less Than 0.2 Inch - 4 Sizes

  • [Upgraded Design] New design patent. Newly designed groove together with two fastening ties make your beloved ring fit your finger without sliding movement..
  • [Multiple size] The (ring adjuster for loose rings women) products are available in 4 different sizes (groove width = 0.08 in / 0.12 in / 0.16 in / 0.2 in) and can be used to adjust rings of different width..
  • [Invisible] There are only two 0.06-inch transparent fastening ties on the ring surface of palm side. It (ring spacer) is imperceptible and will not get attention from your friends..
  • [Soft TPU Material] The ring adjusters spacer are made of high-quality transparent soft silicone gel non-sensitizing material. The comfort of wearing your beloved rings will be never compromised..
  • [It's a little difficult to assemble] The (ring fitter for loose rings)Two small holes can be easily found at one side of the groove. Insert the two fastening ties into the holes and lock them. Carefully cut the overlong part of each fastening tie. Well done!.
Check Stock

Wheel Spacer Set of 4-6 Lug 1 inch Thick 25mm Lug Centric Hub Adapter 6x5.5 - Compatible with Toyota Vehicles - 1996-2018 4Runner 01-07 Sequoia 2001-18 Tacoma Tundra FJ Cruiser - 6x139.7mm

  • Wheel Spacer Kit of 4 6X5.5" 1 Inch - Allows extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for....
  • Compatible With Toyota Vehicles - 1996 - 2018 4Runner | 2007 - 2014 FJ Cruiser | 2001 - 2007 Sequoia | 2001 - 2018 Tacoma | 2000 - 2006 Tundra |. The....
  • Complete Kit - This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers....
  • OEM Fit, Quality, Finish - CNC machined black colored anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and....
  • Lifetime Warranty - This 1inch wheel spacer kit manufactued by AA Ignition comes complete with a lifetime warranty. If the part ever break or fail on....
Check Stock

56 Pieces Skateboard Truck Hardware Kit Includes 8 Pieces Spacers, 8 Pieces Axle Nuts and 40 Pieces Speed Rings for Skateboard and Longboard

  • Package quantity: package comes with 8 pieces skateboard spacers, 8 pieces axle nuts and 40 pieces speed rings, enough quantity to fit on a skateboard or longboard and improve bearing performance.
  • Speed spacer: our skateboard spacer allows you to rotate the axle nut downward all the time, thus reducing slop and increasing bearing life, durability and performance.
  • The +/ -0.02 mm precision tolerance ensures nicely fit and very fast bearing at a time.
  • Speed rings: our speed rings can increase speed and extend longer bearing life by reducing friction among the bearing, axle nut and hangar.
  • Axle nuts: our axle nuts will prevent your wheels from falling off, the more you change your wheels and bearings, the more the axle nuts wear out and lose its tightness.
  • These standard size axle nuts will keep you locked up and will fit most skateboard/ longboard trucks with 8 mm axles (in fact, each truck has a standard 8mm axle size).
  • These axle nuts have thread dimensions of 5/16 inch.
  • Wide application: this skateboard tool kit can be applied for most skateboard/ longboard trucks, they are strong and with proper installation, are resistant to stripping.
Check Stock

Repacked CYCLINGDEAL WTB SX19 Rims Mountain Bike Bicycle 29er Disc Wheelset 29" QR Wheels & Tires - Good Value MTB 29 Inch Rear & Front Wheel Set - Compatible with Shimano 8 9 10 11 Speed

  • COMPATIBILITY: Compatible with Shimano HG system MTB cassette from 8 to 11 Speed. | IMPORTANT: a cassette spacer is required if it’s a 8 or 9 speed cassette. (Spacer NOT INCLUDED).
  • HAND-BUILT: Those wheels are built by hand and the spokes are fully extended by pushing machine. So the spokes will not be extended anymore after a few rides. This step is very important to make sure the wheels are always true. | QUALITY RIMS: Quality and famous WTB SX19 Disc Brake Rim 29",Spokes: 32, Material: Stainless Steel..
  • HUBS: Novatec Front Hub D481SBT weight 287g, Rear Hub D482TSBT weight 476g, 2 Sealed bearing, Quick Release, Gauge 14, O.L.D. Front-100mm Rear-135mm, Axle material S45C, 8 9 10 11 Speed MTB cassette compatible..
  • TIRES: Continental X-King MTB Wire Tire 29" x 2.2 with tubes.Weight: 4250g/set..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 2-year warranty! Made in Taiwan..
Check Stock

WARN 29061 Locking Hub Service Kit with Snap Rings, Gaskets, Retaining Bolts and O-Rings

  • A service replacement part designed to fit with WARN external mount hub sets.
  • This kit will fit the following WARN Premium hub sets: 28739, 29091, and 29087.
  • The kit is composed of a various collection of gaskets or O-rings, screws and snap rings to aid in maintaining WARN hub sets.
  • Package Dimensions: 20.574 L x 11.43 H x 21.082 W (centimeters).
Check Stock

Orion Motor Tech 6x5.5 Wheel Spacers 2 Inch Blue Wheel Spacer Kit with M14x1.5 Studs Compatible with Chevy Silverado 1500 Chevrolet Tahoe GMC Yukon Suburban 108mm Bore Blue Wheel Spacers

  • SAFE AND SECURE: This Orion Motor Tech 6x5.5 (6x139.7) automotive wheel spacer kit improves the cornering, stability, handling, and control of your....
  • PREMIUM MATERIAL: These wheel spacers are made from solid blocks of T6 aircraft-grade aluminum to keep them lightweight but highly durable and strong.
  • SUPERIOR DESIGN: Our hub-centric design offers exceptional stability and safety, leaving stud-based counterparts behind.
  • WIDE COMPATIBILITY: This wheel spacer set is compatible with 1992-2020 Chevrolet, Cadillac, Avalanche, and GMC vehicles.
  • 2 YEAR WARRANTY: Increase your axle track and stability today with your peace of mind assured by our wheel spacer kit's strong 2 year warranty and....
Check Stock