Best Hunting Saws

WEN BL1024 10-Inch 24-Tooth Carbide-Tipped Professional Multi-Material Framing Saw Blade

  • Featuring a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM.
  • Perfect for framing, trim carpentry, remodeling and more.
  • Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
  • Designed with 24 carbide-tipped teeth for general-purpose wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock

WEN BL1028 10-Inch 28-Tooth Carbide-Tipped Professional Multi-Material Framing Saw Blade

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM.
  • Perfect for framing, trim carpentry, remodeling and more.
  • Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
  • Designed with 28 carbide-tipped teeth for general-purpose wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock

48 Inch High Reach Tree Limb Hand Rope Chain Saw and Blades on Both Sides-Best Folding Pocket Chain Saw for Your Camping,Field Survival Gear,Hunting.

  • √PERFECT GIFT - 62 Sharpest Carbon Steel Teeth. The High Limb Saw has an Upgraded 48 Inch Chain with Blades on BOTH sides so it doesn't matter how it lands..
  • √LOTS OF FREEBIES - IF you buy our chainsaw,you will get two emergency safety ropes,2 sturdy woven nylon handles,three spring buckles(one big and two small) and throwing weight pouch..
  • √PORTABLE SURVIVAL CHAINSAW - Cuts high limbs safely and easily from the ground.Our saws will allow you to easily tear through wood while cutting on both stroke rotations..
  • √A TON OF USES - Our chainsaw is perfect for camping,field survival, hunting,backpacking,gardening..
  • √FREE 30-DAY 100% MONEY-BACK GUARANTEE - If you are not satisfied after using our pocket chainsaw, we will offer you a full 100% money-back guarantee!.
Check Stock

CMT P10024 ITK Plus Ripping Saw Blade, 10 x 24 Teeth, 10° ATB+Shear with 5/8-Inch bore

  • For fast and excellent rip cuts thanks to the shear angle design..
  • Use on radial arm saws, miter saws, table saws for cutting soft and hardwood..
  • 0.094 kerf thickness, 0.063 plate thickness, 20° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

UTOOL Pruning Saw Folding Hand Saw with 10Inch Straight Blade and Japanese Style Triple-bevel Teeth for Pruning Bamboo, Trimming Tree Branches, Cutting Dry Wood, Sawing Bone

  • 【Japanese Style Saw】 Triple-bevel staggered teeth(7 TPI) for ultra smooth and sharp sawing, prevent clogging and binding, 25% faster than traditional hand saws..
  • 【Superior Quality】10" replaceable SK-5 high carbon steel blade with high frequency quenching, exceptional hardness and durability for rip-cut, cross-cut and miter cut..
  • 【Ergonomical Design】 TPR+PP non-slip handle with secure gear lock covers blade in folded position, NO TEETH EXPOSED when closed, compact and safe for outdoor and survival..
  • 【Multipurpose】 Anti-rust finish rugged blade combines with 2-handed ergonomic handles ideal for gardening, pruning, trimming, sawing, camping, hiking, hunting and cutting wood, branch, bone and more..
  • 【100% money back guarantee】 Utool stands behind every sold product. For questions or warranty contact us at customer service..
Check Stock

HAUTMEC Professional Bi-Metal Steel Mini/Junior Hacksaw Blades 6 inch, High Speed Steel Grounded Medium Teeth, Pack of 10, HT0150-CT

  • Four ATB teeth and one raker with deep gullets allow for deeper cuts and improved chip-flow.
  • For cross cutting and ripping soft and hardwoods, plywood, and particleboard.
  • On table saws, sliding table saws and cut-off saws.
Check Stock

Lackmond SG20SPL1421 SPL Series Dry Cut Diamond Blade for Cured Concrete 20-Inch by .140 by 1-Inch

  • Dry cut diamond blade for cutting cured concrete outside 48 hours old.
  • Bonded and designed for use on wall saws, air saws and low horsepower walk behind saws.
  • Pre and post-tensioned steel core to eliminate loss of tension and "run-out" during cutting conditions.
  • Delivers excellent speed of cut while maximizing longevity.
Check Stock

KASCO Kam-Lok 25 Inch Professional Commercial Butcher Meat Hand Saw

  • Features a metal trigger blade tightener (caoo the Kam-Lok Lever), Stainless Steel frame and a contoured ABS Solid plastic grip handle. The Weston Brand Butcher Saws have a plastic trigger lock (trigger blade tightener). Cheap Bone Saws have a hollow plastic handle that breaks VERY easily when dropped. Easily lasts a lifetime. The blade will NOT bend when cutting and is very taut - not flimsy like the much cheaper meat saws..
  • Comes with 1 saw blade installed. And 1 extra saw blade FREE! Always face teeth toward front of meat hand saw - just the opposite of a wood saw. Pin to pin measurement on blade is EXACTLY 25 Inches. Overall length of blade is 25.5 inches. Many cheap Butcher Hand Saws will have a variance of up to 1/4 inch - which makes the blade wobbley and unstable - and almost impossible to cut meat with..
  • If you are planning to process beefs or hogs - you Definitely NEED this Meat Handsaw! This Butcher Saw should last for decades - we've been using the same Bone Saw here at our meat processing plant for the last 14 years. We have tried some of the other cheap meat handsaws in the past. None have compared to the KASCO Meat Handsaw..
  • Includes an extra blade FREE! Total of 2 blades included with your 25 Inch Meat Handsaw. Replacement blades av....
Check Stock

Bosch HSBIM9 General-Purpose 9 pc. Bi-Metal Hole Saw Kit

  • All-in-one kit – features two SpinLOCK Universal arbors, steel pilot bit and six hole saws with Progressor tooth design.
  • SpinLOCK universal arbor – fits all brands and sizes to simplify diameter changes with fast plug removal and tool-free install.
  • The pilot bit – designed to start holes in a variety of materials.
  • Progressor tooth design – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • Durable hole saw material – hole saws are made with 8% cobalt alloy.
Check Stock

WEN BL0740 7.25-Inch 40-Tooth Carbide-Tipped Professional Finish Saw Blade for Miter Saws and Circular Saws

  • Features a 7.25-inch diameter (185 mm) and a 5/8-inch arbor (15.875 mm).
  • Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts.
  • Designed with 40 wear-resistant carbide-tipped ATB teeth.
  • Compatible with the majority of 7-1/4-inch miter saws, chop saws, and circular saws.
Check Stock