PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red
【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
VEVOR Hydraulic Directional Control Valve, 6 Spool Hydraulic Spool Valve, 11 GPM Hydraulic Loader Valve, 4500 PSI Directional Control Valve, Hydraulic Valves and Controls for Tractors Loaders Tanks
Hydraulic spool valve: Equipped with 6 spools and 1/2" BSPP type ring inlet/outlet ports. Maximum pressure of this hydraulic is 4500 PSI, and maximum flow can reach 11 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
Double acting cylinders: Hydraulic control valve used to operate double-acting cylinders. All standard spools are spring-returned and can be reset to the neutral position. There are springs at the bottom of the handles that make the joysticks easy to control..
Great inner valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
Compact structure: 6 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
Widely used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applica....
Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Blue)
Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 103 cubic inches / 1.7 liters(1700 cc), 0.45 gallons, Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L ± 0.1L oil tank has a larger capacity with 103 cubic inches / 1.7 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
Durable Oil Pipe Included: This hydraulic air pump is equipped with a 6.5 ft / 2 m hi....
Maxim A3107 Hydraulic Reservoir Tank - 7-Gallon Hydraulic Fluid Tank - Heavy Duty Hydraulic Tank - 12 Gauge Steel Hydraulic Reservoir with Temp Gauge - ¾” Mag Plugs, 40 lb, 12l x 12w x 12h, 202270
SPECS: Maxim’s reservoir tank with 7-gallon capacity and 12 gauge steel body has .75-inch mag plugs and is fitted with oil level gauges cum temperature indicators, filler breathers/basket strainers with suction and return ports on both sides..
IDEAL SIZE: Our hydraulic oil reservoir is a 7-gallon steel tank that is neither too large nor too small. It effectively dissipates heat while allowing trapped air bubbles to escape and slowing the velocity of returning hydraulic fluid..
PROTECTIVE: This hydraulic steel tank reservoir is fitted with a chrome filler breather and basket strainer. The tank allows enough breathing space for hydraulic fluid while filtering contaminants from downstream components..
MULTIPURPOSE: Fitted with oil level gauges cum temperature indicators, our hydraulic oil reservoir tank is a multitasking expert that can be used as a mounting surface for other hydraulic components. It's versatile and useful..
DURABLE: With a 12 gauge steel body powder coated black, this 7-gallon hydraulic tank reservoir can withstand surface corrosion from severe environmental factors. It can be used to store hydraulic fluids in accumulators, pumps, motors, etc..
Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI
Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.
Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Orange)
Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
Oil Pipe & Spray Gun Included: This hydraulic air pump is equipped with a 1.25 m / 4 ft high-pressure oil pip....
Tolsous 1 Spool Directional Control Valves 11 GPM 3600 PSI MAX High Pressure Integral Valve Double Acting for Small Tractors Tractors Loaders Log Splitters
SPECIFICATIONS: Our 3 spool directional control valve for double-acting hydraulic rams has 21 GPM, 4-way 3 pos spring center, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
VERSATILE: This G series P80 DCV has a 3 position, 4-way valving that allows an actuator to open and close. This 3 spool control valve can be used in any hydraulic circuit..
PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
OKBA 64pcs JIC 37° Flare Thread Cap&Plug Kit,37 Degree JIC Cap and Plug Assortment Kit Precision Threading Hydraulic Hose Tube Pipe Adapter AN Fittings Set Kit Dash Sizes 04 06 08 10 12 16
64 PCS hydraulic JIC cap & plug fittings kit,AN assortment hydraulic fitting set,also known as "AN" 37 degree flare JIC caps and plugs. The JIC 37° flare thread cap & plug can be easily installation to seal hydraulic hoses, tubes, and pipes.
A must have for hydraulic lines: hydraulic JIC plug and cap cap kit works great for hydraulic repairs.The JIC cap and plug are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems.
The hydraulic adapter fittings set are made by carbon steel to withstand high pressure applications and high heat fuel delivery and fluid power applications. The jic cap and plug kit fittings have precision threading to make sure install smoothly and resist corrosion.
Packed in a plastic carring storage box case and with size chart with thread sizes,keeps all 37° JIC caps & plug fitting organized with dash sizes: 04, 06, 08, 10, 12,16.
10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump
Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube
This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
