Best Hydraulic Elbow Forming Machine

1/4\ NPT ISO 7241-B Hydraulic Quick Connect Couplers/Couplings w/Dust Caps,1/4” Body Size + 1/4” NPT Thread Poppet Valve

  • The hydraulic quick connect couplers with 1/4” Body Size + 1/4” NPT Thread Poppet Valve.
  • The Series B couplers are interchangeable with all ISO 7241 B series couplings,with 3600 PSI Rating, 14,500 PSI Burst Rating (Coupled).
  • Couplers have double O-rings seal for redundancy in low pressure and vacuum applications.
  • Applications:used in hydraulic applications such as automotive, electronics industries,machine tools,aerospace,mobile hydraulic and other equipments applications..
Check Stock

Nuts over Donuts

  • ...e, the plug is not included in the package. It is recommended that the power supply be connected to the Miniature Circuit Breaker for security concerns. The same is true for the line of the machine..
  • Large Capacity: The large hopper can hold 7L material for effective donut forming.
  • The inner oil tank is 32.1"x6.9"x3.9" (815x175x100mm) (15L) in dimensions.
  • The conveyor is 32.1"x8.1"x4.9" (815x205x125 mm) in dimensions..
  • Multi-function: This commercial donut making machine integrates donut forming, dripping, frying, turning, and outputting into one, fully automatic, largely saving your time and energy..
  • 3 Sizes Available: Three different donut moulds are included (25 mm/35 mm/45 mm), able to produce 1100pcs 30-50 mm donuts per hour, 950pcs 55-90 mm donuts per hour, or 850pcs 70-120 mm donuts per hour. Attention Please: Since the power of this machine is relatively large, the plug is not included in the package..
Check Stock

Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

Elbow Patches for Sweaters, 2-Pcs Sew-On Fabric Jacket Patches Suede Fabric Knee Patch Repair Crafts for Shirts Jackets Trousers

  • Size (L x W): Approx. 14 x 11cm / 5.5 x 4.3 inch.
  • Material: Suede Fabric, Washable, machine washable and tumble dryable..
  • Widely Applicable Elbow Patches: Repair patches for tear, worn areas or holes in your clothes, suit for jackets, sweaters, coats, pants, and other parts. Due to the color differences in screen display, there might be something different between the pictures and products..
  • Perfect Decoration Patch: Perfect for reinforcement and decorative applications. The elbow patches extend the life of your favorite clothes and be an excellent decoration for your elbow or knee part. It can be cut arbitrarily for a small area..
  • What You Get: 2 pcs of elbow patches, worry-free warranty and money-back guarantee. If any problem, please feel free to contact us for replacement or full refund service..
Check Stock

Elbow Patches for Sweaters, 2-Pcs Sew-On Fabric Jacket Patches Suede Leather Knee Patch Repair Crafts for Shirts Jackets Trousers

  • Size (L x W): Approx. 14 x 11cm / 5.5 x 4.3 inch.
  • Material: Suede Fabric, Washable, machine washable and tumble dryable..
  • Widely Applicable Elbow Patches: Repair patches for tear, worn areas or holes in your clothes, suit for jackets, sweaters, coats, pants, and other parts. Due to the color differences in screen display, there might be something different between the pictures and products..
  • Perfect Decoration Patch: Perfect for reinforcement and decorative applications. The elbow patches extend the life of your favorite clothes and be an excellent decoration for your elbow or knee part. It can be cut arbitrarily for a small area..
  • What You Get: 2 pcs of elbow patches, worry-free warranty and money-back guarantee. If any problem, please feel free to contact us for replacement or full refund service..
Check Stock

Top Race Hobby Grade Remote Control Hydraulic Excavator, All Included Battery, Hydraulic Oil, Transmitter, Ready to Run 1:14 Scale TR-311

  • Hobby Grade Remote Control Hydraulic Excavator by Top Race TR-311.
  • powerful hobby grade machine that works with real hydraulics and oil this would be the first step from battery powered rc trucks to oil powered.
  • 1 of kind in the market of rc excavators, at a 1:14 scale this machine can do almost anything just like a real excavator, this Top Race excavator is so powerful it can pull 200 Lbs with its brushless motors.
  • The weight of this Top Race Truck is about 26 Lbs. and comes wioth a beautiful hard carry case, Excavator uses a complex remote, and an 7.4V 10000 Mah battery and hydraulic oil all included with your excavator..
  • CAUTION: This is not a toy if you have no experience in the hobby line of rc trucks and excavators please do NOT buy this machine , this machine needs experience and caution to operate..
Check Stock

2Packs CPAP Headgear for Respironics Dreamwear Full Face Mask, Headgear for Respironics Dreamwear Full Face Mask or Dreamwear Gel, Clips NOT Included

  • ...e, otherwise the elbow would not fit into the heated CPAP tube..
  • Convenient & Flexible for Using: It's very well made and light, it has an elbow shape and directs the hose to where it needs to be in order for it to stay out of the way..
  • Prevent The Hose From Tangling: The original hose that was supplied with the machine didn'tprovide much ability to move around. The elbow allows the hose to rotate if you roll around during the night.Keep the hose from tangling up..
  • Easy To Install: The swivel is easy to install, easy to connect, and provids very nice 360 degree "spin" for the hose. Swivels and seals correctly, helps pivot the tube keeping it more comfortable when sleeping..
  • Vent Holes: The vent holes could promote the emission of carbon dioxide and prevent the carbon dioxide from being inhaled into the body again, so the vent holes and valve should be kept clear. Do not block or close the vent holes on the exhaust device..
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • ...dopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • Product 2: Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3-5.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 1" (25 mm) #8 Grade 60. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc..
  • Product 2: Pure Copper Coil Motor: 1700W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption..
Check Stock

Sportsroyals Stair Stepper for Exercises-Twist Stepper with Resistance Bands and 330lbs Weight Capacity

  • 【Twist Stepper with Resistance Bands】Twist action helps you tone thighs and buttocks, while achieving a challenging cardiovascular workout. Resistance Bands work arms, chest, back, and shoulders for total body workout. Perfect for weight-loss, body-shape,and daily exercise..
  • 【Hydraulic Drive System】European standard hydraulic cylinder strengthen on the stair stepping fitness machine let you enjoy your stair stepping fitness in a quiet environment without disturbing others. The internal super-energy spring that protects the joints and provides a good cushioning effect. Pay attention that the hydraulic tube need rest after 20-minutes exercises..
  • 【Oversized Pedals】Our mini stair steppers use oversized pedals with silicone anti-skid pad as well as the skid-resistant floor protectors to keep your balance when you exercise. Rubber shock-absorb cushions keep mini step machine quite..
  • 【LED Monitor】The LED monitor on the mini stepper can clearly record exercise time, count, calories burned total count,and distance in mile. The screen on the monitor is twice as big as that of other fitness stepper exercises equipments. It is convenient for you to know your exercise situation and make your next exercise plan..
  • 【Fully assembled】This portable stai....
Check Stock

OEMTOOLS 24810 20 Ton Bottle Jack Shop Press, Bend, Straighten, or Press Parts, Install Bearings, U-Joints, Bushings, Ball Joints, and Pulleys

  • 20 TON PRESS: Used for parts straightening, bending, and pressing.
  • ADJUSTABLE HEIGHT FLOOR SHOP PRESS: Adjustable work height, multi-position bed.
  • WORKING RANGE: Hydraulic shop floor press working range: Max. height 31.5 inches.
  • PRESS PLATES INCLUDED: Hydraulic press machine set includes press plates.
  • FULL SPECIFICATIONS: 20 ton hydraulic press ram diameter: 1.8" (45 mm).
  • Working range: working range: Adjustable height with a max. height of 31.5 inches.
Check Stock