Best Hydraulic Impact Driver

ROGTZ Electric Car Jack kit 5 Ton 12V Car Jack Hydraulic Jack with Impact Wrench and Tire Inflator Pump, Car Lift Floor Jack for SUV Sedans Tire Change with LED Light (Black)

  • √4 IN 1 ELECTRIC HYDRAULIC JACK:Our 4 in 1 electric hydraulic jack includes electric hydraulic jack,air pump,warning light and major LED light,which meets all your tire replacement needs in one time.The jack is easy to lift 5 ton car,about 1 min reach max height(lifting height range:6.1~17.7 inch) .The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools..
  • √Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve.
  • Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened.
  • √SAFE AND SECURE TO USE:Our electric hydraulic jackis will automatically stop working after reaching the height limit.The jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety duri....
Check Stock

New Milwaukee 2313-21 12 Volt M12 Cordless Inspection Camera System Scope Sale

  • 2804-20 hammer drill: POWERSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque Compatible with all M18 batteries and tools.
  • 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces M18 FUEL SAWZALL is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE brushless motor to provide users with 3,000 SPM with a 1-1/4 in. stroke length for faster material removal.
  • 2730-20 6-1/2 in. circular saw: POWERSTATE brushless motor provides increased cutting speed and power through the toughest applications M18 FUEL 1/2 in. mid-torque impact wrench with friction ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed, it provides 650 ft. lbs. of nut-busting torque and only weighs 5.1 lbs..
  • 4-1/2 in./5 in. grinder with paddle switch: POWERSTATE brushless motor delivers maximum sustained power to complete the toughest grinding, surface prep and cutting applications.
Check Stock

18V 1/2 Inch Cordless Impact Driver 520N.m High Torque 1/2 Impact Wrench Brushless Drill Impact Driver Adjustable Speed Cordless Impact Wrench Compatible with 18V Battery Not Included

  • ✅ 【Certified Beast】This Brushless motor delivers 383.5 ft.Lbs. Of max torque(520N.M) and 0~4000RPM impact rate. Delivering you more efficiency....
  • ✅ 【1/2’’Quick Release Chuck】1/2’’ Square chuck provide maximum durability and tightness for bits.Impact wrench equipped with stepless....
  • ✅【18V Lithium-Ion Impact Wrench】The Cordless Impact Driver compatible with 18V Lithium-ion Batteries. Such as BL1830, BL1830B, BL1840, BL1840B,....
  • ✅【Work with LED】Trigger-activated LED Light for increased visibility in enclosed work spaces and dark environment. Premium rubber overmold....
  • ✅【Multi-purpose Cordless Impact Driver】A cordless impact driver meets all your needs, and at the same time has forward and reverse rotation,....
Check Stock

DEWALT ATOMIC 20V MAX* Impact Driver, Cordless, Compact Kit, 2 Batteries, 1/4-Inch (DCF809C2)

  • Only 5.1-inch in length of DEWALT impact driver is designed to fit in tight spaces.
  • 1700 in-lbs of torque of the cordless impact driver delivering the power you need to get a majority of applications done.
  • Variable speed trigger of DEWALT 20V 1/4 impact driver allows for control and precision on delicate work surfaces.
  • DEWALT built brushless motor for efficient performance and runtime.
Check Stock

BOSCH GXL18V-601B25 18V 6-Tool Combo Kit with 2-in-1 Bit\\/Socket Impact Driver, Hammer Drill\\/Driver, Reciprocating Saw, Circular Saw, Angle Grinder, Floodlight and (2) CORE18V 4.0 Ah Compact Batteries

  • CONVENIENT 18V 6-TOOL COMBO KIT: Has 2-In-1 Bit/Socket Impact Driver, Hammer Drill/Driver, Recip Saw, Circular Saw, 6-1/2 In. Circular Saw Blade, Angle Grinder, Floodlight, (2) CORE18V 4.0 Ah Batteries, 18V Charger, Belt Clips, Carrying Bags.
  • HALF DRIVER, HALF WRENCH: Has a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for using either bits or sockets.
  • POWERFUL IMPACT DRIVER MOTOR: Delivers a max of 1,800 In.-Lbs. of torque and up to 4,200 ipm for professional power.
  • IMPACT DRIVER: Eliminates using socket adapters, while transmitting more torque directly through the 1/2 In. square drive anvil.
  • HAMMER DRILL/DRIVER DESIGN: Made with a brushless motor to deliver runtime and power for tough applications.
  • PRECISION CLUTCH WITH 20 SETTINGS: On hammer drill/driver provides driving accuracy for reduced fastener damage.
  • LIGHT CORDLESS RECIP SAW DESIGN: Weighs only 6.35 Lbs. (tool only, not including battery), great for overhead work.
Check Stock

BOSCH GXL18V-601B25 18V 6-Tool Combo Kit with 2-in-1 Bit/Socket Impact Driver, Hammer Drill/Driver, Reciprocating Saw, Circular Saw, Angle Grinder, Floodlight and (2) CORE18V 4.0 Ah Compact Batteries

  • CONVENIENT 18V 6-TOOL COMBO KIT: Has 2-In-1 Bit/Socket Impact Driver, Hammer Drill/Driver, Recip Saw, Circular Saw, 6-1/2 In. Circular Saw Blade, Angle Grinder, Floodlight, (2) CORE18V 4.0 Ah Batteries, 18V Charger, Belt Clips, Carrying Bags.
  • HALF DRIVER, HALF WRENCH: Has a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for using either bits or sockets.
  • POWERFUL IMPACT DRIVER MOTOR: Delivers a max of 1,800 In.-Lbs. of torque and up to 4,200 ipm for professional power.
  • IMPACT DRIVER: Eliminates using socket adapters, while transmitting more torque directly through the 1/2 In. square drive anvil.
  • HAMMER DRILL/DRIVER DESIGN: Made with a brushless motor to deliver runtime and power for tough applications.
Check Stock

(1) Hitachi DS10DFL2 12V Drill Driver & (1) Hitachi WH10DFL2 12V Impact Driver

  • Impact Driver Delivers 840in-lbs of Maximum Torque.
  • 1/4-inch Hex Chuck Allows for Quick and Easy Bit Changes.
  • Drill Driver Offers Variable Speed Trigger to Match Power to Application.
  • Includes: (1) Hitachi DS10DFL2 18-volt Drill Driver and (1) Hitachi WH10DFL2 12-volt Impact Driver (Battery and Charger NOT Included).
Check Stock

DEWALT Nut Driver Set, Impact Ready, Magnetic, 4-Piece (DWPVTDRV)

  • The nut driver set is designed for use in Impact Drivers and Wrenches.
  • Recessed corners of the impact nut driver set drive on flats which minimzes shavings.
  • Industrial strength magnet of the magnetic nut driver maximizes fastener retention.
Check Stock

BOSCH GXL18V-701B25 18V 7-Tool Combo Kit with 2-In-1 Bit\\/Socket Impact Driver, Hammer Drill\\/Driver, Recip Saw, Circular Saw, Oscillating Tool, Angle Grinder, Worklight & (2) CORE18V 4.0 Ah Batteries

  • CONVENIENT 18V 7-TOOL COMBO KIT: Has 2-In-1 Bit/Socket Impact Driver, Hammer Drill/Driver, Recip Saw, Circular Saw, 6-1/2 In. Circular Saw Blade, Oscillating Tool, Angle Grinder, Worklight, (2) CORE18V 4.0 Ah Batteries, 18V Charger, Belt Clips, Carrying Bags.
  • HALF DRIVER, HALF WRENCH: has a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for using either bits or sockets.
  • POWERFUL IMPACT DRIVER MOTOR: delivers a max of 1,800 In.-Lbs. of torque and up to 4,200 ipm for professional power.
  • IMPACT DRIVER: eliminates using socket adapters, while transmitting more torque directly through the 1/2 In. square drive anvil.
  • HAMMER DRILL/DRIVER DESIGN: made with a brushless motor to deliver runtime and power for tough applications.
  • PRECISION CLUTCH WITH 20+1 SETTINGS: on hammer drill/driver provides driving accuracy for reduced fastener damage.
  • LIGHT CORDLESS RECIP SAW DESIGN: weighs only 6.35 Lbs. (tool only, not including battery), great for overhead work.
Check Stock

DEWALT Nut Driver Set, Impact-Ready, Pivoting, 3-Piece (DWPVTDRV3)

  • The nut driver set is designed for use in Impact Drivers and Wrenches.
  • Recessed corners of the impact nut driver set drive on flats which minimzes shavings.
  • Industrial strength magnet of the magnetic nut driver maximizes fastener retention.
Check Stock