Best Hydraulic Vertical Shaft

Martin SDS 1 5/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1.31\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Class 30 gray cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Vintage Rat Rod Pickup Truck Hot Rod T-Shirt

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model:186F Туре:Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system:Direct injection Bore*stroke(mm):86x70mm Displacement capacity(cc): 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

HOOAI 799869 Carburetor Lawnmower 792253 497586 499059 Pressure Washer carborator Rotary 14112 Oregon 50-658 - Carburetor for Briggs & Stratton

  • For Briggs & Stratton 497586 499059 carburetor – for Briggs & Stratton Lawnmower 799869 792253 Pressure washer carburetor.
  • For 4-7 hp engines. Fits most vertical shaft engines with choke. Works for Briggs & Stratton 12D800-123K00 series..
  • Rotary 14112 Oregon 50-658 – for Briggs & Stratton Lawn Mower Pressure washer part number: 121XXX 122XXX 123XXX with Choke.
  • This carburetor is used for vertical shaft engines 120000.
  • Comes with 1 carburetor, 1 mounting gasket, 1 rubber o-ring. Please compare your old carburetor with our pictures to make sure the fitment!.
  • HOOAI locates within the states, we provide carefree return, and 90 days money back guarrantee! Lifetime warranty against manufacturer defect!.
Check Stock

Pressure Washer Pump Replacement, 7/8'' Shaft Vertical Pressure Washer Pump, Power Washer Pumps Replacement, 2400-2800PSI Pumps Replacement for Pump Pressure Power Washer

  • · Pressure Washer Pump - 2800psi, Max 2.5 GPM RATING, Fits 7/8" Shaft Vertical Axial Gasoline Engines in 4-7 HP - Such as some models of Troybilt, Ryobi, Generac, Briggs & Stratton,Devilbiss/Excell,Craftsman,Husky,Honda. Not fit all model series. Very Important - This pump is a heavy item. In order to save each other’s time and money, Please check the pump shaft size 7/8’’, the pump housing and mounting size, and the pressure power fit your machine or not before you place the order..
  • · Vertical Power Pressure Pumps COMPATIBILITY - 2400-2800psi,4-7 HP Max.#PowerStroke:PS262311,PS80944,PS80946#Excell:VR2522,VR2500,#Craftsman:580series#Ryobi:RY802700,RY8C2700,RY802700A,etc #Husky: HU80 series #Homelite UT80709 series.It can fit other type models. This pump not fit all series models, pls check your pressure washer’s mounting size, pressure power and shaft size before you buy. If you are not sure if your pressure washer would fit, please contact ' Amazon Customer Service'..
  • · Pressure Washer Pump Parts - Comes with Easy start valve (EZ), Thermal relief valve, Unloader & SAE gas engine flange, M22 outlet, Copper Nut 3/4 NH inlet, Keyway Stock..
  • · Universal Pressure Washer Pump Replacement✦This pump is a universal pressure washer pump replac....
Check Stock

Comet ZWD 4040G Pressure Washer Pump 4 GPM 4000 PSI For 1\ Hollow Shaft Engines (Fully Plumbed with Unloader External Bypass)

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped.
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress.
Check Stock

The ROP Shop 7/8" Shaft, Aluminum Head, Vertical Pump Replacement for Pressure Washer with 2800 PSI and 2.3 GPM, Includes Keyway

  • The ROP Shop replacement 7/8″ Shaft, Aluminum Head, Vertical Pump for Pressure Washer with 2800 PSI and 2.3 GPM.
  • Specs – Maximum Pressure: 2800 PSI, Maximum Flow: 2.3 GPM, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 7/8″ Vertical Shaft. Refer to images 2 & 3 for more information.
  • Includes – (1) Pump, (1) Keyway & (1) Thermal Release Valve.
  • Pump comes with built in Unloader & Chemical Injector.
  • When installing, please ensure that the keyway is installed before running your pressure washer.
Check Stock

Jet/Powermatic 7015-211 Retaining Ring

  • Made of high quality material, wear-resistant, strong and durable..
  • Great for sump plugs, water, fuel and hydraulic fittings and Suitable for faucets, cylinders, valves, pumps, automobiles, bearings.
  • .C Clip External Circlips Snap Retaining Rings Set Stainless Steel M3 4 5 6 8 9 10 11 12 -75mm Washers Circlips For Shaft.
Check Stock

GM 6.2 & 6.5 Liter Diesel Engines: How to Rebuild & Modify

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model:186F Туре:Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system:Direct injection Bore*stroke(mm):86x70mm Displacement capacity(cc): 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

PEGGAS New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Horizontal Pump 3/4“ Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head -Simpson -Briggs & Stratton- Ryobi

  • ✦ GASOLINE PRESSURE WASHER VERTICAL PUMP ✦✦ PW25/2.3 ✦✦ High quality replacement pump for your pump. These are OEM replacement pumps for many models of pressure washers. If your old one stopped working, is corroded etc. don’t hesitate!.
  • ✦ 2600-2700 PSI 2.3 GPM RATING ✦ This pumps is rated at 2600-2700 PSI and 2.3 GPM which is great for any and all small house cleaning projects. Very safe pressure even for washing your car or other things without being afraid to damage the paint!.
  • ✦ UNIVERSAL FITMENT ✦ This pump comes with a standard 3/4” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ Hole Distance to hole – 2 5/8” Outer Holes – 1 7/8″.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE, NOT A 7/8″ SHAFT & NOT VERTICAL ENGINE ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4″ shaft....
Check Stock