Best Hydronic Heating Manifolds

Sharkbite 24632LF 45° Hose Bibb 1/2" x 3/4" Multi Turn

  • INSTALLS IN SECONDS: 1/2 inch x 3/4 inch threaded hose bibb valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

(Pack of 2) EFIELD Push Fit 1/4 Turn Straight Stop Valve Water Shut Off 1/2 Push x 3/8 Inch Compression Chrome with a Disconnect Clip

  • Directly Supplied by One of the Biggest Plumbing systems Manufacturers.
  • Lead Free DZR Forged Brass Fittings Size 1/2 Inch push x 3/8 Inch Comp and 1/4 Turn on/off with a Disconnect Clip.
  • 200 PSI and 200 Degrees F. Use in Potable water and Hydronic Heating Applications..
  • No Tools, No Soldering, No Crimping or Glue. Push to Connect..
Check Stock

4-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

  • 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
  • COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
  • ADVANTAGE - Basic Operating RPM Range: Idle-5500.
  • FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
  • DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check Stock

5 PIECES XFITTING 3/4\ PEX X 3/4\ MALE NPT THREADED ELBOW 90 DEGREE BRASS BARBED CRIMP FITTING - LEAD FREE BRASS, FULL PORT

  • XFITTING PEX Compatible with all types and brands of PEX Tubing - Watts, Everhot, Viega, Zurn, Nibco, Bow, etc..
  • Design certified to ANSI-61/NSF and ASSE 1061 product standard for use in potable water and hydronic heating water distribution..
  • Work with Crimp Connection System (PEX Crimp tool + Copper Crimp Rings) or Clamp Connection System (PEX Clamp tool + Stainless Steel PEX Clamps).
  • 400 PSI, Approved to be used underground and behind walls without access panels.
  • SAME/1 DAY HANDLING TIME, USING USPS 2-3 DAYS FIRST CLASS MAIL W.TRACKING # AND INSURED.
Check Stock

Schneider Electric AG13B020 Tac Erie Spring Return Two-Position General Close-Off Actuator Without End Switch, Normally Closed

  • Designed for use with Uponor TruFLOW manifolds, stainless-steel manifolds, or engineered polymer (EP) manifolds.
  • Accurately controls the flow of fluid through individual radiant loops.
  • Features an end switch for activation of a relay pump, heat plant, or other auxiliary devices.
Check Stock

The Weekend Brewer 8-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

The Weekend Brewer 2-way 5/16" Barb CO2 Splitter Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

ICO H6083 Thames Hydronic Wall Mounted Towel Warmer In Chrome

  • Material: Metal - Finish: Chrome, Brushed Nickel, Polished Nickel - Style: Modern/Contemporary - Width: 23 1/2 in - Height: 34 in.
  • Depth: 5 in - Installation Type: Wall Mount - System Type: Hydronic.
  • Thames Hydronic Wall Mounted Towel Warmer.
Check Stock

LOKMAN 50 Pack 5/8 Inch PEX Cinch Clamps Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections 5/8 Inch

  • HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
  • 360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree....
  • WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications....
  • SIZE - 5/8 inch (20.8 mm) PEX cinch clamps, fit for 5/8 inch PEX pipe..
Check Stock