WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD
Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
The IDE interface is a 44-pin/2.0mm male connector..
The SD card can become an OS and application software that can directly start the device.
Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
StarTech.com Universal Hard Drive Docking Station for SATA and IDE - USB 3.0 Dock for 2.5'/3.5' HDDs/SSDs with UASP (UNIDOCKU33), Black
EASY TO USE: The external hard drive docking station enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots..
ENHANCED WITH UASP: This USB 3.0 universal HDD / SSD dock increases performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller..
SMART DESIGN: This USB 3.0 universal docking station has a single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously..
INCREASED PERFORMANCE: The dual hard drive docking station can be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives..
Connect both an IDE and a SATA 2.5 & 3.5in HDD or SSD to your computer using USB 3.0, with support for UASP for optimal performance.
works with USB desktop & laptop computers and SATA & IDE drives such as Samsung 840 EVO.
hard drive dock / HDD & SSD docking station / hard drive dock / SSD dock / HDD dock.
Test or benchmark virtually any hard drive or solid state drive.
Transfer files directly between SATA and IDE drives without a host computer.
FIDECO SATA/IDE to USB 3.0 Adapter Hard Drive Adapter Cable Converter for Universal 2.5/3.5 Inch SATA and IDE HDD 2.5 Inch SSD 5.25-Inch DVD-ROM/CD-ROM/CD-RW/DVD-RW/DVD+RW
【Universal SATA/IDE Hard Drive Adapter】Hdd converter is compatiable with all 2.5“/3.5” SATAⅠⅡ Ⅲ /IDE HDD SSD.
【Support up to 16TB】 Compact body design, enables access to 2 drives simultaneously. LED indicator light shows Power and activity status. Support....
【Super Speed USB 3.0】 Data transfer rates of up to 5Gbps (The actual transmission speed is limited by the setting of the device connected).....
【Pulg & Play】 Quickly connect 2.5/3.5 inch SATA/IDE HDD to a USB port. 12V 2A power cable is for providing stable electricity supply, Just plug....
【You Will Get】 SATA/IDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1, User's Manual x1. We support 1-year....
Dugout Organizer for Softball & Baseball Gear Hanger for Bat, Glove, Helmet and Bottle of Water- The DOM - Black
MADE IN USA WITH A LIFETIME WARRANTY AND 100% GUARANTEE. IS THE ORIGINAL PATENTED PRODUCT with two PATENTS 1.8245858 2.8616385.
dugout organizer, that each player’s gear stores neatly on the fence for easy access. A cup holder for a bottle of water or (Hydration Fluids) a bat holder, two hooks one for your Jacket and helmet and the other Hook for your glove. Your catchers gear can hang on the DOM easily..
DOM, dugout manager now comes with a designated, pre drilled hole and a high quality carabiner so your dugout manager can be simply hung on the outside of any equipment bag..
DOM also comes with a self adhesive foam helmet holder for and easy hanging options, for the baseball players..
have 9 colors to choose Navy Blue, Black, Translucent blue, Red, White, Orange, Green, Purple and Pink..
WEme USB 3.0 to SATA IDE Adapter with Universal 2.5\ 3.5\ Hard Drive Disk Converter for HDD SSD and IDE HDD, Support 12TB and One-Touch Backup, Include 12V 2A Power Adapter and USB 3.0 Cable for Laptop
Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.
Tccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD
Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Hard Drive Docking Station, Tccmebius TCC-S867-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD
Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports most 2.5 "/ 3.5" IDE / SATA I / II / III hard drive and SSD, Maximum supports 8TB SATA interface hard drive, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
Data transfer: Tool free installation, Convenient external hard drive reader. Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard drive to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s..
One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support f....
SD Card to 2.5 Inch IDE Adapter,SD SDHC SDXC MMC Memory Card to IDE 2.5' 44 Pin Male Adapter Converter
The SD Card to 2.5 Inch IDE Adapter Adapt SD/MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error..
Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk. Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification..
Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted..
Enables SD/MMC card as a normal IDE 2.5" hard disk,Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
NOTE: This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..