Best Ide To Usb For Old Pc

Tccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check Stock

Hard Drive Docking Station, Tccmebius TCC-S867-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports most 2.5 "/ 3.5" IDE / SATA I / II / III hard drive and SSD, Maximum supports 8TB SATA interface hard drive, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Tool free installation, Convenient external hard drive reader. Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard drive to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s..
  • One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support f....
Check Stock

Tccmebius Hard Drive Docking Station, TCC-S868-US USB 3.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports most 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum supports 8TB SATA interface hard drive, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Tool free installation, Convenient external hard drive reader. Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard drive to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5.0Gbps..
  • One-Touch Backup: Through the One-Touch Easily Set Data and Documents From Your Computer Copy to External Hard Drive. Note: To use this feature, you must first install the OTB software on your computer. (How to download OTB software? Please refer to the product's user manual.). Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and wo....
Check Stock

StarTech.com USB 3.0 to SATA IDE Adapter - 2.5in / 3.5in - External Hard Drive to USB Converter – Hard Drive Transfer Cable (USB3SSATAIDE)

  • EXTREMELY VERSATILE: This USB 3.0 to SATA IDE Adapter has built in connectors for both 2.5in and 3.5in SATA hard drives (HDDs) and SATA solid state drives (SSDs) and IDE hard drives.
  • COMPACT DESIGN: This hard drive data transfer cable features a compact, portable form factor design that fits perfect in your laptop bag, making it ideal for professionals on the go.
  • HIGH TRANSFER SPEEDS: For fast access to external storage, this hard drive transfer converter supports transfer rates up to 5Gbps using USB 3.0.
  • PLUG-AND-PLAY: Designed with convenience in mind, this SATA and IDE hard drive adapter is hot swap and plug-and-play compatible.
Check Stock

ACEIRMC 8pcs Digispark Kickstarter Mini ATTINY85 USB Development Board Module Compatible for Arduino IDE 1.0

  • The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar for Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when for Arduino is too big or too much..
  • The Digispark is shipped fully assembled except for the two included and easy to solder headers..
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Check Stock

ACEIRMC 3pcs Type-C USB CH340 5V 16MHz for Nano 3.0 ATmega328P Controller Board Compatible for Arduino Nano CH340 USB Driver Nano V3.0 ATmega328

  • for ARDUINO COMPATIBLE - Use the Nano-C with the for Arduino development IDE on your PC, Mac or Linux computer (USB driver installation required on some OSes).
  • PERFECT FOR BEGINNER OR EXPERT - Learn electronics and programming or jump start your latest project. Get started with the Nano-C in just minutes.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Nano C for Arduino | USB Type-C Connector | ATmega328P | 5V | 16MHz | Without Cable | Connectors Unsoldered.
  • Uses the latest USB Type-C connector for compatibility with modern laptop and desktop computers. The Type-C connector is fully reversible which makes connecting a breeze.
Check Stock

2.5 3.5 Dual Slots USB 3.0 SATA IDE HDD All in 1 Docking Station Card Reader

  • Supports 2.5"/3.5" dual SATA and IDE hard drives simultaneously. All in 1 dual bay docking station allows an easy accessing with two 2.5 inch & 3.5....
  • High speed USB 3.0 interface with data transfer rate up to 5Gbps, 10 times faster than USB 2.0. It supports hard disk clone, high speed one to one....
  • Tool free installation, no driver needed, plug and play, support hot plug. It features 6 slots for multiple memory cards(for SD/MMC/MS cards, TF....
  • External HDD Hard Drive Easily and quickly transfer files from HD to PC or card readers, all-in-one HDD docking with one touch backup(OTB) and one....
  • We promise 1 year limited warranty and worry-free lifetime technical support by Hfong. In the use of products during any product issues, please e-mail....
Check Stock

USB 3.0 SATA III Hard Drive Adapter Cable, SATA 3 to USB A Adapter, External Hard Drive Connector Converter to USB for 2.5 inch SSD/HDD, Support UASP/Trim/S.M.A.R.T/Auto-Sleep Mode, Max 10TB

  • ...ght and slim design, PVC material enhances the strength and durability. Its auto-sleep function (no operation for 3 minutes) reduces ineffective energy consumption, extends hard drive life, and protects hard drive data. The S.M.A.R.T function allows you to easily monitor the status of the HDD/SSD on your computer..
  • Widely Compatible with the most of 2.5" SATA III / II / I HDD (Hard Disk Drive) & SSD (Solid State Drive) up to 10TB, such as Samsung 840 EVO series & Crucial MX 100 series. USB-A equipped devices, including laptops, tablets, desktops, HDTVs and routers. USB 3.0 computer systems such as Windows 10, 8, 8.1, 7, Vista, XP, Mac OS 9, 10, 11 or later, Linux, Chrome os etc..
  • Warm Tips - Hard drive adapter does not support 3.5” SSD & HDD. Not compatible with ATA(IDE), MSATA, M.2 interfaces. Power cable not include. Please confirm your hard drive type before purchase, it only works well with 2.5-inch SSD&HDD. We love our Wavlink products and hope you will too. Buy worry-free, 1-year warranty and friendly customer service..
Check Stock

1300M WiFi Adapter for Desktop PC, ALINKVITE 5dBi Antenna Mini USB WiFi Adapter, USB 3 WiFi Dongle, 2.4/5GHz USB Network Adapters, WiFi USB Wireless Adapter for Win 10/8/8.1/7/XP/Vista, Linux, Mac OS

  • ☆【AC1300 Mpbs High Speed USB Wifi Adapter for PC】 Unlike the traditional USB Wifi adapter for PC, our new type of Wifi dongle adapter has been upgraded to 1300Mbps wireless Wifi speeds, which means our USB computer network adapters can offer 867Mbps over 5.8GHz band or 400Mbps over 2.4GHz band for browsing, gaming, video streaming and download speeds without any lag in long range through the house. Mini usb adapter also passed many official certifications and you can use it with confidence.
  • ★【Super USB 3.0 in USB Wireless Adapter】 WIFI dongle for desktop PC is equipped with USB 3.0 interface, which means the WIFI speed of our WIFI USB adapter for PC is 10 times faster than PC WIFI adapter with USB 2.0. The USB 2.0 WIFI adapter for PC can only get the maximum speed of 400Mbps, which means that the WIFI USB adapter cannot reach the peak speed of 5GHz 867Mbps. But our new type of computer network adapters did it. Besides, our USB wireless network adapter is compatible with USB 2.0.
  • ☆【Superior Secure Protection Network Adapter】 In the light of investigations, we found that whether we can surf the Internet safely with desktop Wifi adapter will be customers’ worry. Wireless network adapter for PC features 64/128bit WEP, Wireless Applicati....
Check Stock

Hard Drive Docking Station, Tccmebius TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s. Integrated all-in-1 card reader (XD card / TF card / MS (Duo / Pro) card / CF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT ....
Check Stock