X-MEDIA XM-EN3451 2.5/3.5-Inch USB 2.0 IDE SATA Aluminum Hard Disk Drive HDD External Enclosure Case Support 3.5-Inch IDE 2.5/3.5-Inch SATA / SSD Hard Disk Drive
Support most 3.5-Inch IDE or 2.5/3.5-Inch SATA I/II/III HDDs, Hard Disk Drive not included.
USB 2.0 connection allows for data transfer speed of up to 480Mbps.
Electroplated aluminum casing for better heat dispersion.
Supported OS: Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 and Mac OS 9.2 and above.
WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD
Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
The IDE interface is a 44-pin/2.0mm male connector..
The SD card can become an OS and application software that can directly start the device.
Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
SATA Card 8 Port, PCIE to SATA 3.0 Controller Expansion Board with Low Profile Bracket, SATA3.0 Interface Expansion Card for Windows 7/8/XP/10
【PCI-E to SATA 3.0 expansion card】Use with SATA3.0 data cable for best results. with 8 x SATA3.0 interfaces expansion interface..
【SATA Controller】Compatible with SATA6G, 3G and 1.5G hard drives. Fit for Windows 7/8 / XP / 10 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface..
【Serial ATA 3.0】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0..
【AHCI1.0 Mode and IDE Mode】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching, and hot plug..
【6.0 Gbit/s / 3.0 Gbit/s / 1.5 Gbit/s Transmission】Supports communication speeds of 6.0 Gbit/s, 3.0 Gbit/s and 1.5 Gbit/s.
supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i..
StarTech.com USB 3.0 to SATA IDE Adapter - 2.5in / 3.5in - External Hard Drive to USB Converter – Hard Drive Transfer Cable (USB3SSATAIDE)
EXTREMELY VERSATILE: This USB 3.0 to SATA IDE Adapter has built in connectors for both 2.5in and 3.5in SATA hard drives (HDDs) and SATA solid state drives (SSDs) and IDE hard drives.
COMPACT DESIGN: This hard drive data transfer cable features a compact, portable form factor design that fits perfect in your laptop bag, making it ideal for professionals on the go.
HIGH TRANSFER SPEEDS: For fast access to external storage, this hard drive transfer converter supports transfer rates up to 5Gbps using USB 3.0.
PLUG-AND-PLAY: Designed with convenience in mind, this SATA and IDE hard drive adapter is hot swap and plug-and-play compatible.
ACEIRMC 8pcs Digispark Kickstarter Mini ATTINY85 USB Development Board Module Compatible for Arduino IDE 1.0
The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar for Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when for Arduino is too big or too much..
The Digispark is shipped fully assembled except for the two included and easy to solder headers..
Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
HDMI to VGA Cable 3ft, DteeDck HDMI-to-VGA Male to Male Active Converter Connector Cord for Monitor Projector HDTV Laptop Desktop...
【USB to VGA Adapter】Built-in most advanced IC chip converts USB signal to VGA signal (Must|Computer with USB and Monitor/TV/Projector With VGA).
【Install Driver】1. For first time to use, you need to install the driver. The driver has been recorded in the CD. 2. If your devices has no CD Player, You can also to download the latest driver from the link we provide..
【Wide Compatibility】Compatible with Windows 11 x64 Drivers,Windows 10 64bit,Windows 10 32bit,Windows 8.1 64bit,Windows 8.1 32bit,Windows 8 64bit,Windows 8 32bit,Windows 7 64bit,Windows 7 32bit. Not support other device with usb 3.0 port like PS3/PS4, Xbox, chromebook, roku ect..
【UH 1080P Video】Supports resolutions up to 1920×[email protected] (1080p Full HD) including 720p, 1600×1200, 1280×1024 for high definition monitors or projectors (Male USB to VGA Female)..
【Not Bidirectional】USB to VGA adapter cable is one-way design. Can NOT be used as a VGA-to-USB converter cable,it only does USB to VGA on one way..