Best Ide To Usb For Windows 98

KOOBOOK 1Pcs SD SDHC Card to IDE 3.5' 40Pin Male Adapter Male IDE Hard Disk Drive Adapter

  • Converts Secure Digital Card into IDE compatible hard drives..
  • Compact Design4-pin computer power supply connector..
  • Bootable solution for PC.You can install the OS onto the SD Card..
  • The data transfer rate is high and the speed is almost the same as that of the system hard disk (ATA/133, U-DMA mode3)..
  • Compatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card.Compatible with DOS, Linux, Windows 98SE, Me, 2000, XP and Vista..
Check Stock

Sabrent USB 2.0/ESATA TO 3.5 Inch IDE or SATA/SATA II Aluminum Hard Drive Enclosure Case with Cooling Fan (EC-UEIS7)

  • Supports any Standard 3.5 inch Serial ATA or IDE Hard Drive.
  • Supports 480Mbps high-speed data transfers.
  • Built in Cooling Fan to reduce Heat,Hot-swappable,Supports Wakeup ability.
  • Requirements : Windows 98SE/2000/ME/2003/XP/Vista/win 7/8 MAC OS X.
Check Stock

Mayflash Wii Classic Controller Adapter For Pc

  • Connects two Wii Classic Controllers, or Classic Pro, or Wii Nunchuks to your PC USB or PS3.
  • No driver needed, suitable for both, Desktop and Notebook PCs.
  • 6ft (1.8288 meters) of attached USB cable for long reach.
  • Compatible with Windows 98, ME, 2000, XP, Vista and Windows 7,‘windows 8 ,32 bit and 64 bit , Windows 10.
Check Stock

Sabrent USB 2.0/ESATA TO 3.5 Inch IDE or SATA/SATA II Aluminum Hard Drive Enclosure Case with Cooling Fan (EC-UEIS7) (Renewed)

  • Supports any Standard 3.5 inch Serial ATA or IDE Hard Drive.
  • Supports 480Mbps high-speed data transfers.
  • Built in Cooling Fan to reduce Heat,Hot-swappable,Supports Wakeup ability.
  • Requirements : Windows 98SE/2000/ME/2003/XP/Vista/win 7/8 MAC OS X.
Check Stock

CY Low Profile 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard

  • 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard.
  • With 9.5mm Length low profile bracket and standard bracket. Interface: Interface: Single-Lane (x1) PCI Express Gen2 Mode.
  • You need to install the NEC USB3.0 driver for your computer first.Compatible: USB1.1/2.0/3.0.
  • Operating Systems: Windows7/8/10(32/64bit) ..
  • Speed: Data Transfer rate of 1.5/12/480/5000 Mbps.Low Speed (1.5Mbps), Full Speed (12Mbps), High Speed (480Mbps), Super Speed (5Gpbs).
  • Power Input: SATA or IDE Power Connector.
Check Stock

SABRENT USB 3.0 TO SATA/IDE 2.5/3.5/5.25-INCH Hard Drive Converter With Power Supply & LED Activity Lights (USB-DSC8)

  • Connect your SATA / IDE device to your computer through a USB port..
  • Supports SATA Hard drive, 2.5" laptop hard drives, 3.5" desktop hard drives, CD-ROM, DVD-ROM, CD-RW, DVD-RW Combo devices..
  • Hot-Swappable: Plug and Play without Rebooting ..
  • Compatible Windows PC or Mac with Available USB 3.0/2.0/1.1 Port..
Check Stock

SABRENT USB 3.0 TO SATA/IDE 2.5/3.5/5.25-INCH Hard Drive Converter With Power Supply & LED Activity Lights (USB-DSC8) (Renewed)

  • Connect your SATA / IDE device to your computer through a USB port..
  • Supports SATA Hard drive, 2.5" laptop hard drives, 3.5" desktop hard drives, CD-ROM, DVD-ROM, CD-RW, DVD-RW Combo devices..
  • Hot-Swappable: Plug and Play without Rebooting ..
  • Compatible Windows PC or Mac with Available USB 3.0/2.0/1.1 Port..
Check Stock

Dial-Up Internet

  • 1. Connects Your Laptop or Desktop Computer to the Internet Using a Dial Up Internet Service..
  • 4. Certified Compatible with Windows 98, 98SE, ME, 2000, XP, Vista, Windows 7 / 8 / 10 include 32 bits and 64 bits..
Check Stock

USECL Laptop SATA to IDE Adapter 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port Converter Vertical Type

  • SATA hard drive can be detected and used as a standard 2.5" IDE hard drive..
  • Convert all SATA type devices CD-ROM/CD-RW/DVD-ROM/DVD-RAM/DVD-RW/HDD into 2.5" IDE device..
  • Allow to connect a 7+15P SATA hard drive to a 44P IDE connector..
  • 7+15 Pin female design allows to connect directly to SATA hard drive without cables..
  • no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI....
Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

  • Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
  • Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
  • Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
  • The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....
Check Stock