Best Idf Union

MakerFocus ESP32 Camera Module WiFi Board: 3MP OV3660 Timer Webcam ESP32-cam Development Board Image Transmission Supports UART Communication Programmable M5Burner Firmware Burning Tool, black

  • Innovative design: Timer Camera is a camera module based on ESP32, integrated 8MB PSRAM, 3MP pixel camera (ov3660), DFOV 66.5°, can take photos with a maximum resolution of 2048x1536.
  • Function Support: LED Status Indicator and Reset, Timer Camera, Sleep and Wake Function, Support UIFlow Graphics Programming, Image Transfer Firmware and image data Acquisition.
  • Supported Platforms: ESP-IDF/Arduino/UIFlow 8-bit/10-bit RAW, RGB and YCbCr output, Compression, UIFlow - Media Transfer, UART/Timer, Arduino IDE, TimerFolderPusher, Timer Amazon S3 FolderPusher.
  • Ultra-low power consumption: In sleep mode, the current consumption of the whole machine is only 2μA, and the timed photo function is turned on, and the battery can work continuously for more than 1 month.
  • Wide range of Applications: Suitable for Various Internet of Things Applications, Industrial Wireless Control, WIFI Cameras, Remote Monitoring, Media Transmission, Smart Device Image Transmission.
Check Stock

MPD Digital Ham and CB Radio PL-259 UHF Male RG-213 Coaxial Jumper Made in The USA TM | MIL-C-17/163A RG-213/U PL259 Low-Loss Double Shielded Coax Cable 50 ft US Made RG-213 Coax

  • MILSPEC RG-213u Coaxial Cable exceeding all US, NATO and IDF MIL-C-17 Standards - NOT Made in China.
  • 3 feet of Coaxial cable 50 Ohm for lowest loss in a frequency operating range up to 400 MHz.
  • Outer Jacket Material: Flexible UV Proof FR-PVC, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74.
  • Velocity of Propagation: 66 % nom. / Dielectric Strength:10000 V minute / Corona extinction: 5 kV / Voltage Rating:3700 V Max. / Operating Temperature: +70 °C - Min. Operating Temperature: -20 °C.
  • Impedance 50 Ohms Frequency Range DC ~ 2 GHz - PL-259 Connectors are not recomended for use above 300Mhz (See N Male options).
Check Stock

MPD Digital Made in The USA RG-213 - Non Contaminating UL Listed Coaxial Cable with USA Made UHF PL-259 Male Connectors for HF VHF UHF Ham and CB Radio Antenna Cable 12 ft

  • Super Flexible .405 inch diameter RG8U Coaxial Cable exceeding all US, NATO and IDF MIL-C-17 Standards - Made in the U.S.A..
  • 60 DAY RETURNS - plus a 1 YEAR EXCHANGE for defects on All MPD Digital Cable Assemblies - 5 Year Warranty on Connectors - 10 Year Warranty on Cable Jacket.
  • This cable has a Non Contaminating PVC Jacket, 95% Shield using Pure Copper Braid, Low Density PE Dielectric and Braided Pure Copper Center - making it the most Flexible and versatile of all the larger HF-VHF Low Loss cables..
  • MADE IN THE U.S.A. by FCC Licensed Ham Radio Operators - Swept with Bird SiteHawk SK-4000 to assure VSWR less than 1:1.35.
  • Velocity of Propagation: 66 % nom. / Dielectric Strength:10000 V minute / Corona extinction: 5 kV / Voltage Rating:3700 V Max. / Max Operating Temperature: +70 °C - Min. Operating Temperature: -20 °C.
Check Stock

uxcell a12080600ux0947 Bimetal Temperature Control Switch Thermostat (Pack of 10)

  • ...int plus differential the compressor is started and then turned off when the temperature reaches the set point value again. In case of fault in the thermostat probe the start and stop of the compressor are timed through parameters COn and COF..
  • Defrost is performed through a simple stop of the compressor. Parameter ?IdF? controls the interval between defrost cycles, while its length is controlled by parameter MdF.Case,XR30CX frontal 32x74 mm.
  • SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened..
  • In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that the wires for probes, loads and the power supply are separated and far enough from each other, wi....
Check Stock

W10508950 Dishwasher Upper Rack Slide Rail Stop Clip Fit for Whirlpool Kenmore Dishwasher, for Parts W10199682 8562015 W10508950 2684662 AP6022472 PS11755805 (2 Pcs)

  • Model Number: W10508950 Dishwasher Stop, replaces W10199682 8562015 W10508950 2684662 AP6022472 PS11755805 ap6013365.
  • Fits Kenmore Elite 665 dishwasher rack stop.
  • Fits whirlpool dishwasher rack stop: DU1245XTSB0,DU1245XTSQ0,DU1248XTSB0,DU1248XTSS0,ADB1400PYW2,ADB1400PYB2,7GU3600XTSY1,GU2548XTPQ3,GU2548XTPS3,GU2548XTPS1,GU2548XTPQ1,GU2800XTVS2,GU2800XTVS3,GU2800XTVQ2,GU2800XTVQ3,GU2800XTVY2,GU2800XTVY3,GU2800XTVB3,GU2800XTVT3,GU2800XTVB2,GU2548XTPS7,,WDT910SSYW1,WDT910SAYE2,WDT910SAYM2,WDT910SAYH2,WDT910SSYB2,WDT910SSYM2,WDT910SSYW2,GU3600XTVY3,GU3600XTVY2,GU3600XTVY4,GU3600XTVY1,IUD7500BS1,IUD7500BS0,IUD8500BX0, etc.
  • Dishwasher Dishrack slide rail stop WPW10508950 prevents the upper dishrack from sliding completely off the slide rail and it ‘s located on each end of the rails..
  • If our dishwasher rack stop fail to deliver on what you expect of the dishwasher slide cap simply return it and we will issue full refund…no questions asked.
Check Stock

MakerFocus M5Stack Tough ESP32 IoT Development Board Kit Waterproof LCD Display Built-in Bluetooth WiFi with Dual Core 32-bit 240Mhz 16M Flash 8M PSRAM for a rduino UIFlow ESP-IDF

  • Smart Upgrade: M5Stack Tough ESP32 Waterproof adopts "O-ring" containing M12 waterproof connector, anti-ultraviolet shell design, comprehensive resistance to solid objects, dust, sand and water immersion.
  • Powerful Configuration: ESP32 IoT 2-inch LCD capacitive multi-touch screen, NS4168 16bits I2S power amplifier + 1W speaker, TFC card slot, AXP192 power management chip + BM8563-RTC clock.
  • Strong Scalability: M5 stack tough k034 Equipped with Programmable Expansion board, integrated 12v-003e5V Flexible DC/DC converter. Flexible power supply, RS485 conversion circuit, ports A, B, C/3x Grove expansion interface, easy access to M5Stack software and hardware system, plug and play sensor expansion.
  • Low-code Develo Pment Support UIFlow graphical programming platform, script-free, cloud push, fully compatible with mainstream development platforms such as Ard uino, ESP32-IDF, etc., execute dual-core processors on Free RTOS, run multitasking, and have better performance.
  • Lnstallation Method: Screw, Roller, Magnetic Force, Adhesive, Applied to IoT controller/data acquisition​​​/display terminal/sequence controller.
Check Stock

Dixell XR20CX-5N1C1 230V/50-60Hz Digital Thermostat Controller Off Cycle Compressor Defrost Programmable-Commercial for Refrigeration

  • ...int plus differential the compressor is started and then turned off when the temperature reaches the set point value again. In case of fault in the thermostat probe the start and stop of the compressor are timed through parameters COn and COF..
  • Defrost is performed through a simple stop of the compressor. Parameter ?IdF? controls the interval between defrost cycles, while its length is controlled by parameter MdF..
  • SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened..
  • In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that the wires for probes, loads and the power supply are separated and far enough from each other, without crossing or intertwining..
Check Stock

Dixell XR40CX-5N1C1 230V/50Hz-60Hz Digital Thermostat Controller with Defrost Management Programmable-Commercial for Refrigeration Units

  • ...ault in the thermostat probe the start and stop of the compressor are timed through parameters COn and COF..
  • Two defrost modes are available through the tdF parameter: defrost through electrical heater (tdF= EL) and hot gas defrost (tdF = in). Other parameters are used to control the interval between defrost cycles (IdF), its maximum length (MdF) and two defrost modes: timed or controlled by the evaporator?s probe (P2P).At the end of defrost dripping time is started, its length is set in the FSt parameter. With FSt =0 the dripping time is disabled..
  • SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened..
  • In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that t....
Check Stock

Dixell XR60CX-5N1C1 Digital Thermostat Controller with Defrost Compressor Control of Evaporator Fans 230V/50-60Hz Programmable-Commercial for Refrigeration

  • ... fault in the thermostat probe the start and stop of the compressor are timed through parameters COn and COF..
  • Two defrost modes are available through the tdF parameter:defrost through electrical heater (tdF= EL) and hot gas defrost (tdF = in).Other parameters are used to control the interval between defrost cycles (IdF), its maximum length (MdF) and two defrost modes: timed or controlled by the evaporator?s probe (P2P).At the end of defrost dripping time is started, its length is set in the FSt parameter. With FSt =0 the dripping time is disabled..
  • Forced activation of fans This function managed by the Fct parameter is designed to avoid short cycles of fans, that could happen when the controller is switched on or after a defrost, when the room air warms the evaporator. Functioning: if the difference of temperature between the evaporator and the room probes is more than the value of the Fct parameter, the fans are switched on. With Fct=0 the function is disabled..
  • Cyclical activation of the fans with compressor off. When Fnc = c-n or c-Y (fans in parallel to the compressor), by means of the Fon and FoF parameters the fans can carry out on and off cycles even if the compressor is switched off. When the compressor is stopped the fans go on working for the....
Check Stock