Best Impact resistant Sealing Gasket

NGK (4838) BP8H-N-10 Standard Spark Plug, Pack of 1

  • Designed to operate over a much wider heat range than ordinary plugs.
  • High alumina ceramics for better heat transfer and electrical insulation.
  • Solid copper core and nickel tipped electrode provide a longer plus life.
  • Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
  • Corrugated ribs on insulator prevents flashover.
  • Triple gasket seal eliminates combustion gas leakage.
Check Stock

AIEVE Blender Gasket for Oster, 12 Pack Blender Sealing Ring Gaskets Blender Rubber Ring O-ring Gasket Seal O-Gasket Rubber Gasket for Osterizer and Oster Blender Replacement Parts

  • Compatible With: Our Blender Gasket for Oster is suitable for Oster blender parts and Osterizer blender replacement parts, but not compatible with Oster Pro 1200 and In2uitive blenders.
  • Premium Quality: The O-ring Gasket Seal is made of elastic rubber material, with good elasticity and wear resistance, can extend the service life of the mixer, stable and durable..
  • Easy to use: Use your hands or tools to remove the old seal ring and replace it with a new one. (Tip: You can remove the blade first and install it without worrying about being injured by the blade.).
  • Good sealing: The rubber material used in Blender Sealing Ring can make the seal ring and the mixer mouth tightly fit, and it is not easy to cause air gaps due to wear. You no longer need to worry about the leakage of the original seal ring due to rapid wear and tear..
  • You will receive a very good Blender Gasket replacement kit for Osterizer and Oster Models with 12 seals inside, which will allow you to use it for a long time..
Check Stock

Engine Pro 30-1000 Overhaul Gasket Set Kit for SBC Chev 283 302 307 327 350 5.7L

  • Fits all Chevrolet built GM 283, 302, 307, 327, 350 5.7L engines from 1957-1979 with left hand dipstick and 2 piece rear main seal.
  • Includes all necessary gaskets and seals to complete your engine assembly with no retorque necessary.
  • Gasket body built with exclusive technology featuring a perforated steel core with advanced adhesive to secure the facings to provide enhanced radial strength for better resistance to scrubbing due to thermal expansion.
  • Exclusive sealing system using a special aluminum compound to provide better load spread.
  • Exclusive Teflon-graphite coating technology for better heat resistance and more effective sealing of small surface imperfections.
Check Stock

NGK (4008) BPR6ES SOLID Standard Spark Plug, Pack of 1

  • Designed to operate over a much wider heat range than ordinary plugs.
  • High alumina ceramics for better heat transfer and electrical insulation.
  • Solid copper core and nickel tipped electrode provide a longer plus life.
  • Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
  • Corrugated ribs on insulator prevents flashover.
  • Triple gasket seal eliminates combustion gas leakage.
Check Stock

2Pack Universal Replacement Silicone Gaskets and Float Valve for 5, 6or 8 Quart Pressure Cooker Models, Such as XL, YBD60-100, PPC780, PPC770 and PPC790

  • Fits models IP-DUO60 (DUO60), IP-LUX60 (LUX60), IP-DUO50 (DUO50), IP-LUX50 (LUX50), Smart-60 (Smart), IP-CSG60 (CSG60) and IP-CSG50 (CSG50),PPC770, PPC770-1, PCXL-PRO6, and PC-TRI6. Not recommended for other brands of pressure cookers – Made exclusively for use in the IP..
  • The rubber gasket is often washed off, leaving the floater loose and the pressure cooker unusable, floater and sealer are part of the lid of Power Pressure Cooker, and are essential for pressure cooker to work..
  • Package Content: 2 Set of 6 (1x floater and 5x rubber gasket).
  • Floater and sealer set fits many models of the Power Pressure Cookers including but not limiting to XL (5/ 6 & 8 quarts), YBD60-100, PPC780, PPC770, and PPC790..
  • Feature: floater is made of stainless steel, floater size: 19 x 9 x 7 mm/ 0.75 x 0.35 x 0.28 inch.
  • Floater and sealer and Gasket are part of the lid of Power Pressure Cooker, and are essential for pressure cooker to work ! Sealing Ring Replace every 18-24 months or when deformation is present in your old sealing ring . Made from 100% Safe Food-Grade durable Silicone ,Odor Resistant..
Check Stock

NGK 3133 BPZ8HS-10 Standard Spark Plug (Pack of 1)

  • Designed to operate over a much wider heat range than ordinary plugs.
  • High alumina ceramics for better heat transfer and electrical insulation.
  • Solid copper core and nickel tipped electrode provide a longer plus life.
  • Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
  • Corrugated ribs on insulator prevents flashover.
  • Triple gasket seal eliminates combustion gas leakage.
Check Stock

FoodSaver Repair Kit: Upper/Lower Gasket, Heat Strip Replacement 4 Foam Gaskets, 2 Strips Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers Replaces Food Saver T910-00075 by OutOfAir

  • FIX THE SUCKING: If your FoodSaver is having a difficult time holding the vacuum while sealing, it’s likely that you just need to replace your gaskets! FoodSaver recommends replacing them annually..
  • FIX THE SEALING: If your FoodSaver is having a difficult time sealing bags, the heating element tape is probably just worn out and needs to be replaced. However this will not fix a heating element that is not working at all. See product description for more details..
  • INCLUDES: 4 Foam Gaskets & 2 Pieces of Replacement Teflon Tape with Adhesive Backing. If you have 1 Foam and 1 Rubber Gasket, only replace your FOAM gasket. Don’t remove the rubber gasket. If you have 2 foam gaskets, always replace both foam gaskets at the same time. Please see description for details on certain models..
  • WORKS WITH: V2200, V2400, V2800, V3000, V3200, V3400, and V3800 Series FoodSaver models. Also works with: GameSaver Deluxe Plus and Vac 800 Series — V2200 Series: V2200, V2220, V2222, V2235, V2240, V2244, V2250, V2254, V2260 — V2400 Series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490 *** V2800 Series: V2820, V2830, V2835, V2840, V2860, V2865.
  • V3000 Series (Lower Gasket Only): V3020, V3040 *** V3200 ....
Check Stock

Joint Sealant PTFE, 1/4” wide x 50 feet long, “DIY” Gasket Material, QTY: 1 spool

  • Do it your self (DIY) material - this product is great for your home and workplace projects. Cut it easily with a knife or scissors. Just peel off adhesive backing and apply to surface.
  • Possible applications - use joint sealant for projects like, gasket creation, vibration reduction, water insulation, leveling objects, floor cushioning, hammering protection, sound reduction.
  • Gaskets - build different shapes of gaskets for plumbing, mechanics, industrial applications, car engines and exhaust, havoc ducts, blowers, outdoor projects….
  • Material: made from 100 percent expanded ptfe (eptfe) high chemical and thermal resistance resistant to ageing physiologically safe.
  • Reliably seals practically all media in the ph. range 0 – 14 -450°f to + 500°f.
  • Joint Sealant, Microcellular Expanded Pure Virgin Teflon, Sealing Cord, Gasket Tape.
Check Stock

Joint Sealant PTFE, 1/2” wide x 15 feet long, “DIY” Gasket Material, QTY: 1 spool

  • Do it your self (DIY) material - this product is great for your home and workplace projects. Cut it easily with a knife or scissors. Just peel off adhesive backing and apply to surface.
  • Possible applications - use joint sealant for projects like, gasket creation, vibration reduction, water insulation, leveling objects, floor cushioning, hammering protection, sound reduction.
  • Gaskets - build different shapes of gaskets for plumbing, mechanics, industrial applications, car engines and exhaust, havoc ducts, blowers, outdoor projects….
  • Material: made from 100 percent expanded ptfe (eptfe) high chemical and thermal resistance resistant to ageing physiologically safe.
  • Reliably seals practically all media in the ph. range 0 – 14 -450°f to + 500°f.
  • Joint Sealant, Microcellular Expanded Pure Virgin Teflon, Sealing Cord, Gasket Tape.
Check Stock

Blender Blade with Gasekt Replacement for Cuisinart Smartpower Duet Spb 456 2B Cbt-500 Sb5600 Cb600 Cutting Assembly Parts

  • COMPATIBLE WITH: Replacement cutter blade assembly fits Cuisinart blender models BFP-10, BFP-10CH, BFP-703, CB-3, CB-5, CB-6, CB-7, CB-8, CB-9, FPB-5, FPB-5C, FPB-5PC, SB-5600, SPB-10, SPB-10CH, SPB-3, SPB-5, SPB-6, SPB-7, SPB-7BCH, SPB-7CH..
  • GREAT FUNCTIONS: Cuisinart blender replacement parts and accessories, fits most cuisinart juice mixer, replacement dull cutter blender blade after much blending work.
  • Rubber gasket replaces with good sealing at the bottom of this blade can be tight fit, no leak..
  • MAIN FEATURES: Black Stainless steel metal blade with coupling attached, sharply constructed.
  • Includes Cuisinart Rubber Gasket Sealing Ring. This blender cutting blade is black, however it can replace the white cutting blade on these models..
  • PACKAGE INCLUDES:1 cutter blade assembly and 1 gasket sealing ring.
  • PLEASE NOTE: Non original products, Any reference to brand or model numbers is intended for identification purposes only. This product does not include any warranty from the manufacturer. This blade should be hand-washed after use..
Check Stock