Best Impedance

Audiopipe Multi-Audio Amplifier 3 RCA outputs w/bulit in 10V line driver

This unit accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer.
Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.
Harmonics Distortion: 0.009% Frequency Response: 20-2000Hz Output Gain: 12 dB.
Output Level (10KHz): > 1V(1KHz Output Impedance: 1 KOhms Channel Resolution: > 60dB.
Input Impedance: 47 KOhoms Input Sensitivity: 260mV S/N Ratio: > 95dB.

PYLE PL63BL: 6.5'' Three way 360 Watt Speaker Systems with Power Handling: 360 Watt MAX, 180 Watt RMS for peak performance.
1'' High Temperature ASV Voice Coil for total quality sound.
DESIGN: Standard 6.5'' Size Fits OEM Locations.
Includes Grills, Wires And Mounting Hardware.
PL6984: 6'' X 9'' 400 Watt Four way Speaker Systems complete with Power Handling of 200 Watts Rms / 400 Watts Max for quality audio performance.
FEATURES: 1.25'' High Temperature ASV Voice Coil.

MD 12000.1 – 0.5 ohm amplifier is developed with the highest technology and performance for automotive sound systems, in white color, to make your system more sophisticated, It is mono, with a single channel with a maximum power of 12.000 Watts RMS..
It is a FULL RANGE amplifier, playing all frequencies in the right measure for you, Operation class Class D, Number of Channels 01, Maximum power @ 12.6 VDC – 0.5 OHM: 12,000W RMS @ 12.6 VDC – 1 OHM: 7,200W RMS.
Input Sensitivity 220mV, Signal to Noise Ratio >95dB, Frequency Response 10 Hz ~5 kHz (-3dB), Crossover high pass (HPF) 10 Hz ~90 Hz (-12dB/8th) Variable, Crossover low pass (LPF) 90 Hz ~5 kHz (-12dB/8th) Variable, Bass Boost Freq.: 35 Hz ~55 Hz.
Boost: 0 ~10dB, Efficiency 79%, Input Impedance 15K ohms, Output Impedance 0,5 ohm, Protection system Output Short circuit, Output Short circuit in relation to the GND, Low Impedance Protection / High or Low voltage Protection / Thermal protection.
Maximum Power Supply Voltage 16VDC, Consumption at rest 3.6A, Maximum music consumption 602.5A, Maximum consumption in sinusoidal signal 1,205A, Dimensions (H x W x D) 8.976 x 2.755 x 21.653 inches (228 x 70 x 550mm), Weight 17.526 lbs (7.95 kg).

These “What Hi-Fi?” award-winning, ultra-compact 3010 speakers achieve outstanding performance by utilizing the 3000 Series, 2-in-1 concentric advanced ring dome tweeter, Aramid fiber/paper cones for the 4-inch bass unit, uprated audiophile crossover components and a stronger, lower resonance cabinet.
Enclosure: 2-way reflex. Bass Unit: 100mm. Treble Unit: 25mm.
Sensitivity: 86dB. Recommended Power: 15-75w. Crossover Frequency: 2.8kHz.
Frequency Response (+/-3dB): 68Hz-22kHz. Normal Impedance: 6 ohm. Minimum Impedance: 6 ohm.
Box includes: 2) Q Acoustics 3010 Bookshelf Speakers (Graphite), (2) Magnetic Speaker Grills, (2) Port Bungs, (1) User Manual, (8) Rubber Speaker Grips.

Lightweight over-ear design advanced closed-back technology2 (50mm) transducer low impedance2d-axis fold-flat mechanism.Connectivity Technology: Wired.
Excellent noise isolation on par with closed-back headphone designs.
Performs well with virtually any headphone connection thanks to low impedance drivers.

Offering high-quality audio performance, it also provides overload protection and long-term reliability.
The ss-6.2 allows you to switch up to six speaker pairs connected to a stereo amplifier.
The ss-6.2 offers two operating configurations: impedance matching and bypass..
Bypass mode is used for direct speaker switching with remote impedance-matching volume controls.
Designed for use with 8-ohm loudspeakers, the ss-6.2 also provides safe connection to Bridged amplifiers and even works in applications where there is....

Number Of Channels: 4 – Channel Minimum Impedance Unbridged: 2 Ohm Minimum Impedance Bridged: 4 Ohm.
Bass/Gain Remote: Not Included Maximum Input Gauge Size: 4 Gauge Series : HQR (Kenwood) Built In Crossover: Full (AP).
Combined Rms Power Output: 540 RMS Combined Peak Power Output: 1000W Dimensions: 220 x 35 x 169.
Rms Output @ 4 Ohms : 100w × 4 Rms Output bridged @ 4 Ohms : 270W × 2.
Ultra Hi-Performance 4 Channel Amplifier Super-slim profile, big-time power High density construction & Cooling Fan Custom made capacitor Gold-plate Terminals.

Inexpensive direct box with a fantastic footprint and the sound quality.
The IMP is an in-line transformer that converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.
Converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.
An ideal direct box for anyone requiring professional quality and durability in an economical package.
Uses Whirlwind's TRHL transformer that's riveted, not glued, to the chassis.

ported enclosure with two 12" subwoofers // wired for 2 ohms total impedance.
polypropylene cone with diamond array pattern // stress controlled spider.
5/8" MDF construction with 3/4" MDF baffle // power handling: 600 watts RMS (2000 watts peak).
total impedance: 2 ohms // frequency response: 29-300 Hz.
spring-post terminals accommodate up to 8-gauge wire // can be installed as front-, rear-, or down-firing, grilles included.

Built in switchable Optical Limiter XLR Mic In & Pass Through Ground lift on XLR signal Stereo/Mono 1/4-in Monitor Input.
3 5mm & 1/4-in Headphone outputs Powered by one 9 volt battery or the included PS27s power supply Lots of output level it's loud Belt clip is included.
Max Input Level -20 dB XLR 40 dB monitor Input Impedance 600 Ohm Mic - 22k Ohm Monitor Output Impedance 10 Ohms Gain 20 dB 1/4-in 50 dB XLR. Bandwidth: 50 - 20 kHz (kiloHertz).
S/N Ratio 90 db Limit Threshold 0 db Current Draw 70 Mils Nominal Max Output Level 100 Mil Watts @ 16 Ohm Power 9 - 15 VDC.