Best Inch Couplings

Apache 98108809 3/4\ x 100' Industrial Rubber Water Hose Assembly with Male x Female Garden Hose Thread Fittings,Black

Contractors industrial water/garden hose.
100 Percent rubber, heavy-duty MGHT x FGHT solid brass couplings and one bend restrictor.
Resists sunlight, abrasion, kinking and cracking.

Check Stock

uxcell Shaft Coupling 12.7mm to 12.7mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor

General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
Shaft Usage: 12.7mm to 12.7mm/0.5 inch to 0.5 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Check Stock

VEVOR Hydraulic Pressure Test Kit 25/40/60MPa, Hydraulic Test Gauge Kit with 6 Couplings, Hydraulic Gauge Kit Made of 304 Stainless Steel, for Excavator Construction Machinery

Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
Interchangeable Test Couplings: Six interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, G1/8, G3/8, M14 x 1.5, M10 x 1, and M10 x 1.25, which are suitable for many kinds of standard excavators..
Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..

Check Stock

uxcell 3mm to 1/8 inch Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Check Stock

Swan Products LOLH5806FM Hose Reel Leader Hose with Male and Female Connections 6' x 5/8", Green

Leader hose with 5/8" diameter and male/female fittings.
Hose leader by Swan Products, LLC, 5/8" x 6' M/F with kink-resistant design.
Hose leader by Swan Products, LLC, 5/8" x 6' M/F with crush-resistant couplings.
Hose leader with crush-resistant couplings for long-term use.
Hose leader with flexible construction for easy maneuverability.

Check Stock

8 Pack 7mm Flexible Coupling Connector for Any Motors with Shaft Diameter of 0.275in/7mm - Car Wheels Tires Shaft

【SIZE】--L25mm x D20mm/0.98inch x 0.79inch( L*D).
Diameter: 5mm to 8mm / 0.19inch to 0.31inch.Set screwsThread Size: M3.
【MATERIAL】--The product is made of high-quality aluminum alloy with high hardness and blue polyurethane to make the overall effect more textured. Type: Plum shaped..
【SPECIAL DESIGN】--Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, Wear resistant ,high hardness and excellent response..
【QUALITY】--Super torque can absorb vibration, appropriate a large torque transmission.It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
【APPLICATION】--The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..

Check Stock

Motis - Snagger Tool for Firefighting, a Powerful Multi Tool Firefighter Gear, Firefighter Tools, Red

Allows Easier Hose Handling - Advance charged hose line more quickly and efficiently when firefighting. The Snagger allows you to turn your hand 90 degrees from its normal position when holding the hose which gives you better posture, more strength, and most importantly more leverage..
Effortlessly Break Tempered Glass - This rescue tool can easily break tempered glass with its tungsten carbide tip..
It’s a Spanner Already In Your Pocket - The Snagger Tool works on all caps and couplings as a spanner. Save a trip back to the truck, and use your Snagger to tighten or loosen hose couplings..

Check Stock

uxcell 2pcs Shaft Coupling 6.35mm to 6.35mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor

General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
Shaft Usage: 6.35mm to 6.35mm/0.25 inch to 0.25 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D).
Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

Check Stock