Best Inch Scope Rings For Picatinny Rail

Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 34 mm Diameter | Black

Dual ring scope mount for mounting standard 34 millimeter diameter tube rifle scopes.
Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
Mounts to any flat top Picatinny rail equipped rifle.
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.

Fits low power variable optics with standard 30mm size tubes.
Compatible with M1913 Picatinny rail mounting platforms.
2.52 inches of clearance between the rings, centers scope 1.5 inches above the rail and weighs 8.2 ounces.
Solid aluminum construction with a durable matte black anodized finish.
Covered by a limited lifetime warranty for defects due to materials or workmanship.

Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....

GOTICAL Ruger 10/22 Weaver and 3/8" Dovetail Mount Dovetail Predrilled Receiver Rail Mount Adapter (Black).
This Ruger 10 22 silver scope base mount with screws is lightweight Weaver/dovetail scope mount.
scope mount is dual purpose base for the Ruger 10/22 it can take both Weaver and 3/8" dovetail rings.
Fits the pre drilled holes on top of your 10/22 rifles receiver and it is easy to install.
Made from Black anodized aircraft grade aluminum. Accepts all standard 3/8" Dovetail, Weaver / Picatinny 1913 rings.

Easy to install in existing pin ports on the receiver - no gunsmithing or special tools required.
Solid one piece design of saddle style that straddles both sides of receiver.
Top Picatinny rail is 6inch long and has 14 ring slots for proper scope or red dot sight placement.
Machined aluminum alloy body in anodized non glare matte finish.
Works with full size scopes and red dot sights with standard Weaver or Picatinny rings..

SOLID AND DURABLE CONSTRUCTION: The ring set is made of strong yet lightweight aluminum in a black matte finish.
it was built to withstand any amount of recoil and multiple uses due to its strong performance.
FITS MOST WEAVER/PICATINNY-STYLE MOUNTS: Built with performance in mind, this set includes 2 pieces of low-profile rings that fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
suitable for all 1-inch / 25.4mm scope tube.
VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
this will hold any other 1" accessories that you might want to mount.
EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively....

Large Self-locking Thumb Knobs Nut: A unique self-locking thumbnut that fits snugly in the Picatinny for continuous zero holds..
5.19" Long with 6 Slots: Allows enough space for mounting of different sized optics and provides flexible eye relief adjustment..
Material & Size: Picatinnys rail mount adapter made of high strength Aluminum Alloy. Length: 132mm (5.19inch). Width: 21mm (0.83inch). Height: 33mm(1.3inch).Item Weight: 60g, Lightweight and Portable design..
Using: Drop-In and tighten the installation. 20mm Standard Weaver Base take any scope mounts. 6 slots tactical 20mm weaver scope base use for outdoor sport..
Buy with Confidence: Package includes 1x Picatinny Rail Set, 2x Screws, Full Metal Scope Mount Base With QD Nut. Welcome to contact us if you have any questions or concerns, our customer staff will help you to solve the problem as soon as possible..

Double scope ring mount for 11mm dovetail mounts..
One of the dovetail rings features a stop pin, for rock solid application..
High profile, 21mm(0.8 inch) from top of the dovetail rail to bottom of rings ( Item height: 1.9 inch)..
The scope ring is for most scopes which are in 1 inch/ 25.4mm scope tube..
With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..

Converts your rear sight into a 1913 Picatinny rail allowing for mounting low profile optics For Hunting Red Dot Optics.
Feature: -Fast and easy installation. -Mount on standard 20mm weaver base -Constructed of Aluminum.
Quick 1 step installation. Ultra light weight and low profile red dot scope mount for rifles Reference aiming dots on rear to use scope mount rail as....
Accessories Rear Sight Scope Mount Rail Picatinny Weaver For Optics.
Specification： 1.Customizable level adjustment (up/down, left/right) . 2.Hardcoat anodized 6061 aircraft aluminum. 3.Recommended for use with low....

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
Available in three heights to match your needs: Medium Profile 1.00 inch, High Profile 1.20 inch, and Extra High 1.35 inch.