NCElec 15M Drip Irrigation Kit,Adjustable Misting Cooling System for Automatic Garden Plant Greenhouse
【Packing】1pc * 1/4” PE tubing( 15M ).
1pc * 1/2″& 3/4″ threaded faucet connector.
【Adjustable Drip Irrigation Emitters】Each misting nozzle can be adjusted, allowing to set each plant to receive its customized watering according to its precise needs..
【Easy to Install】Heat the PE hose first (using hairdryer or hot water) and then install the nozzles for easy assemble ,without digging or plumbing skills.
【Complete Drip Irrigation System】This drip irrigation kit contains all the parts to start a system from a faucet or a garden hose and can be expanded to cover up to 20-25 square meters of irrigation area.
【Save Water and Money】The misting system can save up to 70% in water savings. Great for agriculture, lawn, garden, patio, greenhouse, swimming pool misting fog cooling irrigation..
Get started with drip irrigation with a kit that contains all the essentials you need to slowly water the soil around your plants for complete root zone hydration.
Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows.
use the kit to set up a drip irrigation system on its own, or to expand on an existing drip irrigation system.
Connect the swivel adapter preassembled on the dripline to faucet or hose bibb.
position dripline near plants and stake down with included stakes.
Non-Pressure Compensating Drippers have a ½ GPH flow rate.
Use with a pressure regulator connected to the ¾ in. FHT X ¼ in. adapter to reduce water pressure to a manageable flow rate for drip irrigation.
Kit contains everything you need to get started and installs in three steps: 1) Connect the adapter on the dripline to the water source.
and 3) Stake down to hold dripline in place near your plants.
Kit Includes: 50 ft. of ¼ in. tubing/dripline preassembled with ¾ in. FHT adapter.
RAINPOINT Automatic Watering System for Potted Plants Automatic Plant Waterer with Auto/Manual/Delay Watering Mode,Indoor Plant Irrigation System with Pump for Vacation
【Automatic Watering System for Plants】Featuring with Auto mode, you just need to customize your irrigation schedule,this indoor plant watering....
【2 Charging Options】This drip irrigation kit is equipped with 2 selectable charging options: 4 AA 1.5V batteries(excluded) or a USB charging....
【Effective Water Saving】This plant watering system adopts an efficient water-conserving method, direct access to plant roots, helping you to save....
【Compact Size but Smart Enough】With its compact design, this small auto plant watering device is portable to be hung on any container to take care....
【Easy to DIY】The indoor watering system for plants comes with a timer that offers all indoor plant accessories you need --1/4" Tubing (32.8Ft),....
Habitech Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required
Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low flow water pressure, and prevent backflow all with a single pre-assembled unit..
Connect ½” tubing to any standard ¾” male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2" tubing sizes .520 to .620 ID (inner diameter) including Rain Bird and Dig..
Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately..
Don't settle for leaks and blowouts. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention. Senninger 25 PSI pressure reducer is checked for accuracy and known worldwide for its reliable performance..
HIRALIY 49ft Drip Irrigation Kit for Raised Bed, Garden Watering System for Plant, Drip System for the Veggie Garden, Automatic Irrigation System for the Patio Flower, 1/4\ Drip tubing and Brass Adapter
[Adjustable Drip Irrigation Emitter] The drip emitter can be adjusted to stop, to micro drip, to spray, so you can use the water drip system to water many kinds of plants in your garden, and can save up to 50% in water savings. What's more, the drip emitters have the support stake, convenient for placing in soil..
[No-leaking Brass Splitter] The drip irrigation system kit provides the exclusive splitter, which has a solid brass construction and no rust. It can not only separate two drip line, but also be adjusted by the butterfly-shaped switch. US standard 3/4" threaded size, widely matching for the garden connector, such as outdoor faucet, hose splitter, garden filter, garden timer..
[Easy To Assemble & Use] Simple installation without digging or plumbing skills, simply insert the fittings and droppers, you can begin watering your plants instantly. The drip system kit includes the User Manual with the QR code to get the installation video..
[Wide Applications] Irrigation system kit is great for lawn, patio vegetable garden, plant greenhouse, flower bed, the raised bed..
[The Whole Kit to Make The Drip System] This automatic drip irrigation kit includes all accessories to make a drip irrigation system. 49FT(15m) black tubing, 1pcs brass splitter adapter,....
Mudder 100 Pieces 5.2 Inches Drip Emitters Fan Drip Emitters for 1/4 Inch Drip Irrigation Tubing 360 Degree Adjustable Irrigation Drippers Micro Spray Irrigation Drippers Stake Drip Emitter Plastic
Satisfy Your Irrigation Needs: you will receive 100 pieces of 360 degree adjustable irrigation sprayers.
Among them, there are 50 dripper irrigation emitters in red and green, and 50 micro spray irrigation emitters in black and blue, sufficient quantity and various styles to meet your irrigation uses and replacements, as well as sharing demands.
Adjustable Design to Control the Amount of Water Spray: these drip irrigation spray emitters can be adjusted by rotating the water outlet hole caps, to control the amount of water according to actual needs, providing the appropriate resources for your plants, saving your energy and water resources.
Easy to Make Your Own Irrigation System Emitter: you can directly connect the 0.16 inches or 0.28 inches tube (not included) to the barb on the side of the irrigation emitter for use, then rotate the cap to adjust the water flow according to the needs of different plants, and guide the water precisely to the place where it is needed, so that the plants can grow well.
Proper Size to Apply: these drip irrigation sprinklers measure approx. 13 cm/ 5.2 inches in length, portable and easy ....
【164FT Drip Irrigation Kit】Drip Irrigation Kit is suitable for an area of 164 square feet. The installation of drip irrigation system has 16 tributaries and 40 sprinklers, comes with 11mm/0.43" and 7mm/0.27" size tubes which can water more than 40 different plants just by turning on the tap..
【Adjusting Water Flow】The drip irrigation system includes 3 different adjustable drippers, droplets, sprays, fountains. By adjusting the water output and controlling the water pressure, the problem of water shortage at the end of the irrigation system can be solved..
【Water Saving 70%】After installing the irrigation kit, just turn on the tap to water all the plants that need irrigation. Using an garden irrigation can save at least 70% of water compared to watering with a traditional sprinkler..
【DIY Irrigation System】Watering kits are made of high quality PVC plastic, very easy to install, no digging or plumbing skills required. Watering kits allow you to design your own watering system based on how your plants are arranged..
DIY Plant Drip Irrigation Kit | Adjustable Automatic Irrigation System Watering Saving Universal Faucet with 4 Different Irrigation Ways | with 123 PCS Accessories,for Garden Backyard Greenhouse Lawn
[Adjustable Drip Irrigation Emitter] The drip emitter can be adjusted to stop, to micro drip, to spray, so you can use it to water many kinds of plants in your garden, and can save up to 50% in water savings. What's more, the drip emitters have the support stake, convenient for placing in soil..
[No-leaking Two-ways Adapter] The drip irrigation system kit provides the exclusive two-ways adapter, which has a solid construction. It can not only separate two drip lines but also be adjusted by the ON/OFF switch. US standard 3/4" threaded size, widely matching for the garden connector, such as outdoor faucet, hose splitter, garden filter, garden timer..
[Easy To Assemble & Use] Simple installation without digging or plumbing skills, simply insert the fittings and droppers, you can begin watering your plants instantly. The watering system kit includes the User Manual with the QR code to get the installation video..
[Wide Applications] Irrigation system kit is great for the lawn, the patio vegetable garden, plant greenhouse, flower bed, the raised bed, fruit orchards, and shrubs..
[The Whole Kit to Make The Drip System] This drip irrigation kit includes all accessories to make a drip irrigation system. 91.8FT(28m) black tubing, 2pcs two-ways adapters, 22pcs Tee....
2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)
2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
It can help you drill easily and fast and save time and energy for you.
The combination of blue and black color makes the dr....