Best Induction Brazing

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application:The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

20 Sticks Aluminum Welding Rods ,20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉,Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

Uniweld KC100P Centurion Weld Braze Outfit with 511 Plastic Carrying Stand brass copper blue

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Centurion series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

Yonico Router Bit Set Professional Carbide Tipped 70 Bit 1/2-Inch Shank 17702 - Large Assortment, Straight, Edge Forming, Dovetail, Grooving, Flush Trim Fresas de Router para Madera

  • Professional 1/2 Shank router bit set with carbide cutters includes a large assortment of router bits including straight bits, slotting bits, edging bits, joinery bits, roundover bits, keyhole bits....
  • A large selection of essential router bits in a full range of sizes for every project. Includes premium bearings for smooth operation and fence setup and adjustment..
  • Premium thick C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge with optimal hook and shear angles. Proper relief angles which prevent burning..
  • For use on table mount and handheld router. Suitable for professional users and beginners and for all project types. Comes in a handsome wooden display case to keep your bits organized and sharp..
  • Silver induction brazing for maximum strength and durability. Finely balanced and tuned with a build-up and heat resistant coating with anti-kickback design..
Check Stock

Solderweld SW-HVAK00 Brazing Pack with Carrying Case includes 56% 0% Braze Rods Al-Cop Aluminum to Copper - Alloy Sol Repair Solder Rods Rods and Flux

  • 2 sticks of Sil Sol 56% Flux Coated Brazing Rods.
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection 4-Pack

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Yonico Router Bits Set 15 Bit 1/2-Inch Shank 17150 Professional Carbide Tipped Roundover, Cove, Chamfer, Bevel, Dovetail, Straight, Flush Trim, Slotting, Roman Ogee fresas de Router para Madera

  • A perfect 1/2" shank starter set with a great selection of Router bits to accomplish a variety of basic routing jobs such as edging, joining, trimming and slotting..
  • Includes: 4 Dado/Straight Bits - 1/4", 3/8", 1/2" and 3/4" 1 Flush Trim Bit - 1" x 1/2" 1 Dovetail Bit - 1/2" x 10° 1 V-groove bit - 90° 1 Core Box Bit - 1/4" Radius.
  • 1 Chamfer Bit - 45° 2 Cove Bits - 1/4" Radius & 1/2" Radius 1 Roman Ogee Bit - 5/16" 2 Round-Over Bit - 1/4" Radius & 1/2" Radius 1 Rabbet/Slotting Bit - 1/2" H x 3/8".
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. The bits are also coated with teflon which helps to reduce friction and heat build-up..
  • Silver induction brazing for maximum strength and durability. The set is presented in a durable storage case for easy organization and transportation..
Check Stock