Best Industrial Automation Training

Joywayus 12mm x 8mm Pneumatic Tubing Air Compressor Tubing PU Pipe Polyurethane Hose Tube Fluid Gas Transfer 16.4ft 5 Meter Orange

  • Package Content: 1 X Pneumatic Air PU Hose..
  • Flexible,has high elasticity to restore memory effect..
Check Stock

uxcell Pneumatic Air Tubing, 10mm OD x 6.5mm ID 10 Meters 32ft PU Polyurethane Air Compressor Tube Hose Pipe Blue

  • Flexible, has high elasticity to restore memory effect..
  • Compression-resistance (in Usual Temp.): 0.8MPa(8.5kgf/cm2).
  • Package Content: 1 X Pneumatic Air PU Hose.
Check Stock

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

HangTon M12 A Coded 5 Pin Male to Female Actuator Sensor Signal Cable for Industrial Controls Automation, Device Network DeviceNet, CANopen, IO Link, Profibus 2m

  • M12 A Coded Actuator Sensor Signal Cable.
  • M12 A coded aviation connector 5pin male to 5pin female.
  • Length 2 meters. 24AWG 5-conductor wire, PVC jacket.
  • The 5-pin connector has plastic cover, with braided shield.
  • for Sensor, Industrial Controls Automation, Device Network DeviceNet, CANopen, IO link, Profibus.
Check Stock

Treedix Breakout Board Module with Pin Board for Teensy 4.1/3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
  • Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
  • Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
  • Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
  • Note: The package is not include teensy development board.
Check Stock

OrangeA Linear Rail 2 Set SBR20-1000mm 2 Linear Rail Guide and 4SBR20UU Bearing Block Linear Slide Guide

  • Complete Linear Rail Kits: This linear rail set includes 2pcs 39.4 in / 1000 mm long SBR20 rail shafts and 4pcs SBR20UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing..
  • High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
  • Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
  • Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. It's no need for maintenance..
  • Wide Application: The linear guide rail is widely used in automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Check Stock

Deegoo-FPV NEW 12pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module

  • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications..
  • 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs..
  • Built-in hardware CRC error detection, Multipoint communication address control. Built-in 2.4Ghz antenna..
  • nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi..
  • Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation..
Check Stock

Chengliang Power Supplys 24v 15a Dc 360w Original Ender 3 3D Printer Switching PSU

  • 24v creality ender 3 3d printer original power supply 24 volt adapter Universal Regulated output 24v 15a 360w.
  • Input voltage ac 115/230v by switch range 100-130/200-264 vac convert ac 115/230v to dc 24v 15a 360w.
  • Efficiency over 86% for 3d printer CCTV monitor led light strip industrial automation communication.
  • Smart full protections SCP OVP UVP OPP OCP OTP auto on/off cooling fan power on auto works Noise≤35dB.
  • You get one original ender 3 printer power supply CL-P360W24V-D warranty 3 years 24hrs online service.
  • Withstand 300V AC surge input for 7 seconds.
Check Stock

Linear Rail,SBR20-1000mm 2Pcs Linear Slide Rail Shaft + 4pcs SBR20UU Baring Slide Block,Linear Rails and Bearings for DIY CNC Routers Lathes Mills Automated Machines

  • 【HIGH-QUALITY STEEL MATERIAL】- CNC parts linear rails are made of carbon steel, linear Bearings made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, More durable..
  • 【PREMIER LINEAR GUIDING SYSTEM】- Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
  • 【EASY TO INSTALL】- Aluminum alloy support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance..
  • 【WIDE APPLICATION】- The linear guide rail is widely used in the automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Check Stock

HUNSN Fanless Mini PC, Industrial Computer, IPC, Windows 11/ Linux Ubuntu, Intel Core I7 8565U, IX02, TPM2.0, AES-NI, 9-36V, Watchdog, WOL, 4G Supported, 4 LAN/4COM, (32G RAM/256G SSD/1TB HDD)

  • Compact, fully functional,all the power and functionality of a desktop industrial computer in a compact, stylish chassis,powered by intel quad core i7 8565u processor, ideal for industrial and commercial applications,work with any brand monitors. suit for automation,medical,transportation,warehouse,electric education etc, installation type: desktop,din rail mount,vesa,wall mount (option)..
  • Windows 11 (64 bit)installed, set up is effortless and it's ready to run straight out of the box.allows you to install software, games, apps and enjoy video, music, photo,support most online games and pc games, like warcraft, counter-strike (cs), support some 3d games but this is integrated graphic not independent cards..
  • Fanless passive cooling design:silent solution that’s ultra energy-efficient.the advanced fanless passive cooling design maximizes heat dissipation, meaning all operations can be conducted in absolute silence. business friendly features: 0 noise,low consumption,very slim..
  • HUNSN IX02 designed with 4*lan+ 4*com (com 1,2 option for rs232/rs422/485)+ vga+ hdmi+ 4*usb 3.0+ 2*usb2.0+ audio,industrial aesthetic design and reasonable interface layout. support tpm2.0 security encryption, power-on boot, scheduled boot, network wake-up, pxe boot, watchdog (....
Check Stock