Best Industrial Reaming Tool

Drill America 11/16\ HSS Straight Shank Machine Expansion Reamer (Pack of 2)

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Pedrini Black & Satin Citrus Fruit Reamer

  • Handy for quick, clean and easy I. . reaming and . . beveling of 5mm-38mm (3/16"to 1 1/2")tube..
  • Metal body construction with long-wearing alloy steel blade..
  • Gives fast, professional reaming on copper, aluminum, brass and of tubing..
  • Used to remove burrs from metal pipes and plastic pipes.
Check Stock

Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch

  • Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time.
  • Reduce time on projects with large quantities of conduit runs.
  • Designed to fit into power drill chucks and quick release adapters with improved bit retention.
  • Includes precision engineered replaceable reaming blade.
  • Replacement blades (SKU #19353) are available and the only approved blade for use in our tool.
  • Designed to be used on Electrical Metallic Tubing (EMT).
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Chicago Pneumatic CP9285C - Air Power Drill Hand Drill Power Tools & Home Improvement 3/8 Inch 10 mm Keyed Chuck Pistol Handle 0.62 HP / 460 W Stall Torque 4.1 ft lbf / 5.5 Nm - 3000 RPM

  • Excellent for drilling, honing, reaming and hole sawing.
  • Flat back part for better pushing action while drilling and tapping.
  • Composite housing with thermoplastic rubber handle grip.
  • Large teasing trigger and progressive valve allowing more control to start holes.
  • Supplied with high quality industrial Jacobs chucks for longer use.
Check Stock

Milwaukee 48-22-3079 6-In-One Combination Wire Stripping and Reaming Pliers for Electricians

  • WIRE STRIPPING: Strip 8, 10, 12, 14, 16, and 18 gauge bare wire. Alternatively, strip 10, 12, 14, 16, 18, and 20 gauge stranded wire.
  • LOOP MAKING: Two holes in the center of the unit will accept 8-32 and 6-32 wires to make loops for grounding screws.
  • REAMING: Smooth out your pipe edges from between 1/2 to 1 inches.
  • BOLT AND SCREW CUTTING: Thread your #6 and #8 bolts through the center of the tool and cut to whichever length you prefer.
  • CURVED CUTTING BLADE allows you to cut through larger wire sizes than the template allows.
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Jonard Tools TC-300 Tube Cutter, 1/4\ - 3\ (6.3mm - 76mm), for Copper, Brass, Aluminum, Plastic Pipes and Ducts

  • ADJUSTABLE BLADE: Performs radial cuts on 1/4" to 3" (6.3 - 76 mm) copper, brass, aluminum and plastic tubes without damaging anything inside them.
  • 4 ROLLER BEARINGS: Securely hold tubes in place while cutting.
  • QUICK RELEASE BUTTON: Disengages the tool from the pipe quickly and easily.
  • BUILT-IN REAMER: Removable reamer stored neatly in handle for deburring and reaming after cutting.
  • INCLUDES: Spare cutting wheel stored within the knob for convienence.
Check Stock