Best Industrial Router

SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length.
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

CMT 800.527.11 3-Piece Entry & Interior Door Router Bit Set in Hardwood Case, 1/2-Inch Shank

  • Contains a 3-inch tenon cutting bit and a 1-7/8-inch rail and stile router bit set.
  • Anti-kickback design, Non-Stick Orange Shield Coating.
  • 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance.
  • For cutting plywood, hardwood/softwood on router tables only Not for use on hand-held routers.
  • CMT bits were rated the best overall in comparison to other brand (Test by Wood Magazine).
Check Stock

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank , 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

  • Solid Carbide Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 1-1/2” Dia 2+2 Carbide Inserts Slab Flattening Router bit Cutter Planing Bit Woodworking Milling Cutter

  • SIZE: The wood router bit shank 12.7mm（1/2"）.
  • Carbide Inserts: above part 14*14*2 mm(≈ 5/9*5/9*2/25"), 2+2 Insert Design.
  • Professional Spoilboard Surfacing Router Bit,not only can it be used for wood slab flattening.It can also be used for slotting/grooving..
  • UPGRADE:Compared with ordinary milling cutters, this cutter can be replaced with carbide insert.This is more suitable for professional woodworkers..
  • Surface bit cutting applications of Industrial Spoilboard, Rabbeting, Flycutter, Leveler, Surface Planer and Bed Insert Router include spoilboard, large surface planing and trapping on MDF, Balsa Core, hardwood, softwood and all artificial materials.
  • This professional 2+2 wood milling cutter 1/2" Shank Has better bottom clearing effect,finer surface finish and better clearance for 90° angles..
Check Stock

Mesee Set of 2 Pieces Extra Long Straight Router Bit Set 1/4-Inch Shank Double Flute Straight Grooving Bits Trimming Cutter Woodworking Milling Tools with 2 & 3 Cutting Height

  • 1/4 Inch Shank Straight Router Bit Set with 2 Different Cutting Depth: 2" and 3'', Cutting Diameter: 3/8''.
  • Double flute straight bits, designed for trimming, three-dimensional clearance angle, slotted and wood screw holes..
  • Solid hardened steel bodies with anti-kickback design, high hardness and toughness, high abrasion resistance, impact resistance..
  • Industrial grade C3 micro grain carbide blade for cutting wood, MDF, particle boards, plywood, panels, softwood, and other synthetic wood..
  • Suitable for a router table or desktop woodworking engraving machine like CNC hand-held and table-mounted portable router,can not be used for electric drill & drill machines..
Check Stock

FivePears Tungsten Carbide Router Bits - 12 Piece Router Bit Set with 1/2-Inch Shank for Doors,Tables,Shelves,Cabinets,DIY Woodwork

  • ★ HIGH QUALITY : the router bit set (1/2" shank) is constructed with C3 hard tungsten steel and 45# carbon steel for durability..
  • ★ MULTI-FUNCTIONAL BIT SET : 12pcs/set (1/2" shank) included,different cutter types, work out a different effect. It is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels..
  • ★ EASY TO STORE : included wooden case,sturdy and makes storing the high-quality router bits convenient while in-between jobs or home improvement DIY projects. The case also helps protect the bits while traveling to work or remote site locations.
  • ★ WIDELY APPLICATION : suit for chipboard, MDF board, hardwood,softwood etc., and mainly used in router Table,kitchen,bathroom,cabinets,doors,shelves,DIY woodwork and industrial carpenters.
  • ★ SATISFACTION GUARANTEED – Fivepears is committed to providing consumers with the absolute best price and value on our entire line of products..
Check Stock

Bingfu SMA Male to N Female Low Loss KSR195 Coaxial Adapter Cable 3 feet 1m Compatible with 4G LTE Wireless Router Gateway Cellular RTL SDR USB ADS-B Receiver

  • Compatible with 4G LTE Mobile Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular, 4G LTE Cellular Trail Camera, Game Camera, Outdoor Security Camera, Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal.
  • Compatible with: WiFi Router, USB Adapter, Wireless AP Hotspot, WiFi Signal.
  • Wireless Mini PCI Express PCIE Network Card, IP Security Camera, Wireless Video Surveillance Monitoring, FPV Drone Controller, FPV Camera.
  • Wireless Backup Camera, Rear View Camera.
  • Compatible with: RTL-SDR USB Dongle, ADS-B Receiver, Ham Radio, Amateur Radio, GPS Navigation Antenna Extension Cable.
  • Package List: 1 x Cable (As the Picture Shown).
Check Stock

Bingfu SMA Male to SMA Female Bulkhead Mount RG174 Antenna Extension Cable 3m 10 feet Compatible with 4G LTE Router Gateway Mobile Cellular RTL SDR Dongle Receiver

  • Connector: SMA Female Bulkhead Mount 50 Ohm Connector.
  • Package List: 1 x Cable (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular, 4G LTE Cellular Trail Camera, Game Camera, Outdoor Security Camera, Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal.
  • Compatible with: WiFi Router, USB Adapter, Wireless AP Hotspot, WiFi Signal.
  • Wireless Mini PCI Express PCIE Network Card, IP Security Camera, Wireless Video Surveillance Monitoring, FPV Drone Controller, FPV Camera.
  • Wireless Backup Camera, Rear View Camera.
  • Compatible with: RTL-SDR USB Dongle, ADS-B Receiver, Ham Radio, Amateur Radio, GPS Navigation Antenna Extension Cable.
  • 【Note】 - The connector it is [SMA] , (NOT) [F type], 【not fit TV's and TV Antennas】.
Check Stock

Bingfu 4G LTE Antenna 8dBi Magnetic Base MIMO SMA Male Antenna (2-Pack) Compatible with 4G LTE Wireless CPE Router Cellular Gateway Industrial IoT Router

  • Compatible Carrier Network: Verizon, AT&T, T-Mobile, Sprint and etc.
  • Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz.
  • Package List: 2 x Antenna (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
  • Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera.
  • Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
  • Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check Stock

Bingfu SMA Female Bulkhead Mount to SMA Male RG316 Antenna Extension Cable 1m 3 feet 2-Pack Compatible with 4G LTE Router Gateway Cellular SDR USB Dongle Receiver

  • Connector: SMA Female Bulkhead Mount 50 Ohm Connector.
  • Package List: 2 x Cable (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular, 4G LTE Cellular Trail Camera, Game Camera, Outdoor Security Camera, Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal.
  • Compatible with: WiFi Router, USB Adapter, Wireless AP Hotspot, WiFi Signal.
  • Wireless Mini PCI Express PCIE Network Card, IP Security Camera, Wireless Video Surveillance Monitoring, FPV Drone Controller, FPV Camera.
  • Wireless Backup Camera, Rear View Camera.
  • Compatible with: RTL-SDR USB Dongle, ADS-B Receiver, Ham Radio, Amateur Radio, GPS Navigation Antenna Extension Cable.
  • 【Note】 - The connector it is [SMA] , (NOT) [F type], 【not fit TV's and TV Antennas】.
Check Stock