Best Industrial Servo Controller

EpRec 30A 12V 24V PWM Solar Charge Controller Compatible with Lead Acid/ Lithium-ion/ Lithium Iron Phosphate Battery

  • 【Upgraded Solar Panel Controller】This 30a solar charge controller compatibility with 12V 24V system.Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float),the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • 【LCD Display】Backlight LCD display PV/Battery/Load charge and discharge parameter.Dual USB can give your electronic product max 5V 2.5A..
  • 【Intelligent Control】This solar controller fit for lithium-ion/ lithium iron phosphate /Lead-acid batteries(OPEN,AGM,GEL,) with mutiple load timer(Load should be DC).It has a wide range of applicability and automatically identifies daytime/night.For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • 【Safe to Use】PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial,commercial etc..
  • 【Customer First】12 months honor warranty from EpRec and 24hrs after service.Your satisfaction is our priority..
Check Stock

Consew 206RB-5 Walking Foot Industrial Sewing Machine with Table and Servo Motor

  • The industry favorite machine, #1 professionals choice. One of the most reliable machines on the market..
  • Walking foot compound feed (triple feed) industrial sewing machine.
  • Features Extra Long Max. stich length 10mm, High foot lift 9/16" (14mm), Large Bobbin, adjustable height of the walking motion.
  • Perfect for Furniture Upholstery, Leather, Auto, Marine and canvas work..
  • Comes with Table and Servo Motor - everything you need to start sewing. Beautiful white color..
Check Stock

Globact RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)

  • 【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
  • 【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
  • 【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
  • 【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
  • 【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

PGFUN Hollow Rotary Actuator High Accuracy Hollow Rotating Platform Rotary Positioners Fitting Nema 34 Stepper Motor Substitutable for Direct Drive Motor and Cam Indexer

  • High Accuracy Rotating Platform: 0.5 arcmin positioning accuracy and 5 arcmin repeated positioning accuracy make it can be applied in high-precision industrial automation scenarios..
  • Equiped with Crossed Roller Bearing: featuring high rigidity, high rotational accuracy, stable rotational torque, and high load-carrying capacity..
  • 360 Degree Rotating Table: it can perform positioning and staying at any angle, the table comes with sensor holder to meet higher standards industrial needs..
  • Easy to Install: It is convenient to contact the loading platform and wiring with hollow design, the table can directly contacting with servo or stepping motor, very easy to install..
  • Have Any Questions on This Hollow Rotating Platform, Free to Contact Us..
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/6,1/8, 1/10, 1/12 RC Car/Robot/Boat

  • High Torque Servo:This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
  • All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
  • Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
  • With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

Consew 206RB-5 Walking Foot Needle Feed Industrial Sewing with table and servo motor

  • The industry favorite machine, #1 professionals choice. One of the most reliable machines on the market..
  • Walking foot compound feed (triple feed) industrial sewing machine.
  • Features Extra Long Max. stich length 10mm, High foot lift 9/16" (14mm), Large Bobbin, adjustable height of the walking motion.
  • Perfect for Furniture Upholstery, Leather, Auto, Marine and canvas work..
  • delivered in 5 boxes. machine . servo motor. table. k legs. cross bars..
Check Stock

RIAARIO RC Cars for Adults 36 KM/H High Speed Remote Control Truck for Kids 380 Motor Hobby RC Trucks 1/18 All Terrain Monster Trucks for Boys 4X4 Off-Road Racing RC Car with 2 Batteries

  • ...nd found operators in enjoyment. Compare with 5 wires servo, 3 wires servo owns a higher torque and relieves the turning stress of the front wheel..
  • With 2* 7.4V 1300 mAh high-capacity batteries, this toy vehicle's play time is extended to 40 minutes. IPX4 electronic speed controller includes overheat and over-current protection for safe playing. You can adjust the speed through TH.TRIM button on the 2.4GHz anti-interference controller and proportionally control the car speed based on the real car. 10-minute auto shutoff for saving power..
  • 4 strong oversize anti-skid tough Rubber Wheels which are soft, elastic, and durable, give the 1/18 scale fast remote control car effective traction for bashing on almost any terrain. The uneven texture on the tires provides excellent friction and build the base of emergency stopping of the car..
  • RIAARIO lastest 1/18 monster truck is a complete short course truck body shell with full cockpit driver and copilot included. Our kid remote control car is upgraded parts include 7 LED lights,thicker nylon chassis,and aggressive front and rear bumpers improve handling over race tracks,trails,mudd....
Check Stock

WEISHUJI Servo Link Pull Rod, Steering Linkage Servo Link, RC Pull Rod, Adjustable Aluminum Steering Linkage Servo Link Pull Rod Turnbuckle 62mm-75mm for Traxxas Slash 4x4 5807 1/10 RC Car(4Pcs, Blue)

  • Servo Link Pull Rod is made of high-quality metal material, Steering Linkage Servo Link is resistant to wear and corrosion..
  • Servo Link Pull Rod has precision CNC machining technology, RC Pull Rod supports high durability and exquisite appearance..
  • Servo Link Pull Rod is very easy and convenient to install and remove, RC Pull Rod is suitable for all M3 hex screws..
  • Servo Link Pull Rod is the replacement accessory for HSP 94111 / 94188 RC car upgrades..
  • Package of Servo Link Pull Rod includes: 4 x Steering Linkage Servo Link.
Check Stock