...ing pressure stably even in long circuits and uneven terrain. Ideal for watering plants in outdoor landscapes, flower pots and hanging baskets..
【Compatibility】 The irrigation drippers are suitable for 1/4" tube with inner diameter of 0.17" or attach into supply tube with 0.17" diameter punch hole directly. Drip emitters can be buried and "ported" to the ground. Save water and promote rapid and healthy growth of plants..
【Reasonable design】 2 GPH emitters can maintain a constant water flow no matter where the drippers are placed, even with different working water pressures, ensuring that the same amount of irrigation water is provided for each plant. The emitters with turbulent flow and self-cleaning design can flush out sediment to reduce clogging..
【Durable material】 Made of remarkable and durable ABS plastic and silicone treated with UV inhibitors, which can work in a variety of harsh outdoor environments to ensure the healthy growth of plants. The drip irrigation drippers can be used for a long time in the temperature range of -40℃ to 85℃ and remain strong and durable without deformation..
【Satisfactory Service】 We will provide you with 30 day 100% refund guarantee and 24-hour friendly customer service..
Orbit DripMaster 65199 Flag Dripper, 1-Gallon Per Hour, 10-Pack
SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
ECO FRIENDLY: Provide water directly where you need it without any overspray!.
EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!.
Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run.
Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in..
connects to point-of-connection device using appropriate fitting.
emitters and feeder lines can be punched directly into the line or attached to the end.
Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
the middle layer is composed of recycled content.
Comes with one 500 ft. coil of 5/8 in. poly supply tubing.
Works with Raindrip products and other products with compatible connection type.
Xbox One IR Extender Blaster Cable (3 Head, 10 Foot)
Our dual Heads design allows you to control multiple devices with only one IR output. Works with Xbox one, Apple TV, Many set top boxes, DVD, Blu-Ray and IR repeater systems - Check the technical details below to ensure it will work for you..
Unlike other older IR emitters found our IR Emitter Extender Cable can handle any IR code format in 38kHz and 56kHz. This means it is designed for today's newer Audio Video equipment.
These are Emitters, Not Receivers. We also sell receivers as well please put this number in the Amazon search bar and they will show up- B07V8BYR96.
Lead is terminated with a 3.5mm mono mini plug, Length of wire: 10 feet that can be separated by gently pulling the heads apart.
We have designed this unit without the annoying human eye visible blink so your not annoyed or distracted every time you push a button on any remote control..
...iversally Compatible: The power cord plug can be made into U.S., EU and U.K. standards respectively, meaning this universal clamp lampstand can be used in most of the countries around the world.
and the E27 ceramic socket base accepts all types of bulbs, including standard bulbs, halogen, ceramic heat lamps and UVB infrared emitters at 200-Watt or less.
Worry-Free Shopping: If There Is Any Problem about the purchase or the item, Please Feel Free To Ask, We Will Reply Within 24Hrs, And We Will Try Our Best To Solve It. More Special Offers And Product Promotions As Below!.
Raindrip 052050 1/2\ X500'Drip Water Hose, 1/2-Inch, Black Polyethylene, 500 ft
Use in a variety of ways: as a main supply line connected to a low-flow, drip-watering device.
as a feeder line that branches off larger tubing or pipe.
and with emitters punched into the tubing to deliver water along the line.
Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in..
connects to point-of-connection device using appropriate fitting.
emitters and feeder lines can be punched directly into the line or attached to the end.
Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
the middle layer is composed of recycled content.
Comes with one 500 ft. coil of 1/2 in. poly supply tubing.
Works with Raindrip products and other products with compatible connection type.
AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three
Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
solvent weld to PVC components for a watertight connection.
Comes with one PVC Elbow. Meets applicable ASTM standards..
