EcoPlus Eco 2245 Water Pump Fixed Flow Submersible Or Inline For Aquariums, Ponds, Fountains & Hydroponics - UL Listed, 2166 GPH, Black
These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow.
All pumps are oil free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications.
Included fittings: 0.75" barbed x 1.25" threaded, 1" barbed x 1.25" threaded and two-1.25" barbed x 1.25" threaded.
EcoPlus Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more.
DURABLE & STURDY: Made of high quality steel with coating on the connecting part, skate axle bolts is durable, sturdy and not easy to loosen..
EASY TO INSTALL: Skate axle is only suitable for skating shoes required the female axle fittings on the wheel..
NOTE: Doesn't suit for roller skating shoes. Please check the length and suitability you need before order..
15 PCS A SET: The package include 15pcs female skate axles for inline skating wheels. A necessary replacement part for skating wheel..
GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund in 180 days. In terms of any problem of this product, you can send emails to us at any time..
DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000
Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
PointZero Airbrush Mini Sandblaster Air Eraser Glass Etcher
Premium quality: This precision crafted PointZero Airbrush handheld etcher includes a gravity-feed, 15cc cup with screw on cover and inline moisture filter..
Advanced control: The single-action trigger and 0.5mm round-pattern nozzle combine to provide fine controlled air eraser or mini-sandblaster effect on a variety of materials..
Varied uses: Etch glass, plastic, metal or other materials, clean paint, discolorations, corrosion and rust from jewelry or other small items, erase defects from artwork, and add weathering effects to models, as well as many other applications..
Boxed set: Includes the etcher with 15cc cup, 6’ braided hose with standard 1/8” BSP fittings, handing bracket, 150-gram bottle of 220-grit aluminum-oxide abrasive compound and disposable face mask..
7 Bonus airbrush guides: eBook Includes access to 7 exclusive How-To Airbrushing Guides: Top 8 Cake Airbrushing Tips, Guide to Airbrush Cake Decorating, Developing Basic Artistic Skills, 10 Essential Airbrushing Tips, Airbrushing Strokes and Techniques, Airbrush Cleaning Manual, and the Airbrush Lettering Guide.
Geekpure 5 Stage Reverse Osmosis Replacement Filter Set with 75 GPD Membrane -Standard 10 Inch
Universal Compatible standard 10" reverse osmosis replacement filter cartridges set,size at:2.5"OD x 10" height.Fits most standard sized 5 or 6 stage reverse osmosis systems.
Pack of 8.[1 x PP sediment filter,1 x Granular activated carbon filter, 1 x Carbon block filter,1 x 75 gpd Ro membrane,1 x Post inline carbon filter,2 x Quikc fittings,1 x Seal tape]-NOTE: THE LAST STAGE POST CARBON IS 1/4"NPT THREAD INLET AND OUTLET.
NSF certificated RO membrane filter down to 0.0001 micron,Reduce 99% contaminant,including Heavy Metal,Arsenic,Lead,Mercury,Fluoride,Cadmium and more 1000+ contaminants to provide healthy, safe and pure water.
All Filters are individually wrapped&sealed and extend shelf life,Feed Water Condition:Water Pressure:40-100 psi,Temperate:40-110°F/5-45°C,Ph:3.0 -11.0,Max TDS :2000 ppm tap water or well water.
ISO9001:2008 certificated Manufacturer,also Member of Water Quality Association (WQA),30 Days Money Back Guarantee,Please flush new filters 30 minutes.
Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow
...l, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be wear-resistant to assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart..
Hydrofarm AAPW400 Active Aqua 400 GPH Submersible Hydroponic Pond Aquarium Water Pump (2 Pack)
PROFESSIONAL PUMP: The water pump is designed for ponds, water gardens, fountains, statuary hydroponics, and other water features. Features dual-functioning options of inline or submersible.
STRONG AND DURABLE POWER: High-efficiency pump is oil-free and environmentally friendly with output pressures of 3.2 PSI and has a powerful mag drive construction. Built with a ceramic shaft and is suitable for saltwater operations.
WATER FLOW CONTROL: Includes an adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 400 gallons per hour and is recommended for 40 gallon reservoirs.
WIDELY APPLIED: Multiple hose fittings for versatility and the intake aeration kit allows you to naturally oxygenate your water. Use this pump indoors or outdoors and the BPA-Free pump is safe for aquaponic use.
INCLUDES: Includes removable foam filters, impellers, rubber mounting feet to reduce vibration and lengthen pump life, 6-foot heavy-duty power cord, and pump which is 4.5 pounds with 120VAC/24W.
M18x1.5 DIN Valve Scuba Adapter with Gauge, Scuba Tank Valve 4500PSI with 22inch Hose for Air Tank PCP Air Rifle Paintball HPA Tank
【High Pressure Resistance】Working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI with a gauge to indicate the pressure.
【Two Types of Threads】One-piece DIN valve with two types of external threads, M18x1.5 & 5/8-18UNF.
【Dual Gauge Design】One gauge indicating tank pressure and the other gauge indicating the inline pressure.
【Easy Installation & Quick Release】WIth a 57cm long stainless steel spring protection hose and an 8mm female quick-release coupling plug, to be connected and released from other male fittings within seconds.
【High Compatibility】Mainly used for high-pressure gas cylinders, SCBA gas cylinders, SCUBA diving cylinders or PCP gas cylinders, for air/carbon dioxide filling.
