Best Inner Shaft

KAISH Black Set of 2 Abalone Top Guitar Knobs Dome Knobs Bass Knob with Set Screw for Tele/Telecaster

  • Abalone top - this is a natural material so knob to knob might have variations.
  • Bottom inner hole diameter for pots: about 6.1mm (Important: please be sure to measure the diameter shaft of your pots before ordering) Outside diameter: about 18.5mm.
  • Fits any guitars or basses which have 6mm or less than 6mm diameter Solid or Split shaft pots.
  • But they DO NOT fit some larger USA 1/4"(6.35mm) diameter pots.
  • Please be sure to verify the shaft diameter of your pots before ordering, to avoid any unfit problems..
  • High quality knobs with faultless finish.
Check Stock

Autoly 4mm to 4mm Inner Bore Diameter Rotatable Universal Joint Coupling Shaft Metal Flexible Shaft Coupler for RC Robot Boat Car Motor, with Screws(2 Pack)

  • Model: 4mm to 4mm / 5/32-inch to 5/32-inch.
  • Material: Universal joint shaft coupling made of steel, high strength, high stability.
  • Application: Rotatable Shaft Fitting Accessory, can be used in model airplane boat, robot,RC modelmotor etc.
  • You will received 2Pieces of Rotatable Universal Joint Coupling Shaft, great replacement for your old or broken one.
Check Stock

DrizzleStik Flex - Golf Club Umbrella (Black/White)

  • Protect Your Clubs- Durable Nylon Material With Patented Deep Canopy Design And Protective Inner Liner Protects Your Golf Clubs From Rainy Weather.
  • Extendable Club-Like Shaft- It Has A Telescoping Umbrella Shaft Is 54" Extended Length And 36" Collapsed Length Made For Easy Storage In Golf Bag Side Pockets.
  • Spring Top- The Spring Top Allows The Canopy To Pivot In Any Direction To Pull Your Club Out Of Your Golf Bag.
  • Classic Rubber Golf Grip- Classic Rubber Golf Grip, Allows Golfers Of All Skill Levels To Quickly And Effectively Protect Their Golf Clubs From Rainy Weather.
Check Stock

NTN ASPF205-100 Light Duty Flange Bearing, 3 Bolts, Setscrew Lock, Non-Relubricatable, Contact Seals, Pressed Steel, Inch, 1\ Bore, 2-63/64\ Bolt Hole Spacing Width, 3-3/4\ Height, 1770 Static Load Capacity, 3150 Dynamic Load Capacity

  • Pressed steel flanged housing for light-duty applications with low to moderate speeds.
  • Light-duty, double-sealed radial ball bearing insert with a narrow inner ring accepts moderate radial loads and light thrust or combination loads.
  • Synthetic rubber lip contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Extended inner ring for increased shaft support.
Check Stock

BENLIUDH 4 Pcs Universal Joint Shaft Coupling 4mm to 6mm Inner Dia U Joint Coupler with Screws for Motor

  • Material：Universal joint shaft coupling is made of nickel-coated iron，much stronger, wearproof, Long service life。.
  • Dimensions：Inner Diameter: 4mm to 6mm，Outer Diameter: 11mm/0.43”；Height: 24mm/0.94”。.
  • Package Include：4 x universal joint shaft coupling, 1x hex wrench, 8 x fastening screws。.
  • Application: The universal joint is suitable for the use of the straight shaft of the motor, and is suitable for the use of various metals such as model cars, model boats, and robots，It is suitable for various general machinery occasions。.
  • It Can be bent at any angle (rotation angle is 45 degrees), and the universal joint can change the transmission direction at any angle。.
Check Stock

THUNDERBAY Cyclone 120V Lithium Ice Auger (Powerhead w/8" Auger Bit and 18" Extension)…

  • 【Ice Auger Adapter and Extension】Hex head shaft Ice Auger Adapter fit in 1/2 inch drill chuck for Power Drill and adjustable in three different heights, about 14 inches in length. 0.79 inch inner Round Shaft black extension fit to Gas Powered Earth Auger , 12.6 inches in length. The Extension and adapter convert most hand ice augers to automatic mode, saving your fishing time..
  • 【High-Performance Drilling】8'' auger diameter, about 20'' drilling depth(without Extension length ), weight 5.4 lbs. Quietly, lite weight and easy to use. Comes with spare blades, Dual flat steel blades offer smooth cutting and breakthrough. Drills fast and with the center point it can overlap holes and helps keep the bit stable when starting..
  • 【High Quality】The Ice Auger, Auger extension and Ice fishing Auger Drill Adapter were all forged from heavy duty, welded steel and finished with a powder coat for Long-lasting use without rusting or damaging..
  • 【Safety Topper and Carry Bag】The safety topper is really a must to prevent the auger from going through the ice if it falls out of your drill chuck. Saved your auger from disappearing dow....
Check Stock

CHANCS TYZ42 Synchronous Motor AC 12V 5r/min CW/CCW Shaft 35mm TYC40 Gear Motor for Fiber Optic Christmas Ornamen …

  • This is a TYC-40 AC 12V CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Shaft Diameter: 4.5mm ； Shaft Length: 35mm； Shaft Screw Thread Inner....
  • 【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
  • 【Attention:】 The applicable voltage of this motor is AC 12V. USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
  • 【Package Content:】1PC x Synchronous Motor；1PC X Screw ；1 PC X Wire Quick Connector.
Check Stock

Hedge Trimmer, 26mm Hedge Trimmer Blade Attachment Replacement Parts for Brush Cutters Garden Trimmers

  • Compatible with 26mm diameter tube/rod/shaft, the inner shaft is 26mm square hole..
  • Easy to install and disassemble, which can directly replace old or damaged parts..
  • The cutting is clean and fast, and simple operation, suitable for garden pruning..
  • The double‑blade design is used for trimming hedges, shrubs, bush and twigs..
  • Selected 65 manganese steel + aluminum alloy material, durable and wear‑resistant..
Check Stock

BOLANY Bicycle Fork 680DH DH Downhill Mountain Bike Fork Downhill Oil Brake 20mm Suspension Front Fork

  • Product Name: 680DH disc brake barrel shaft mountain bike speed drop AM shock absorber front fork.
  • Specifications: magnesium alloy leg gold inner tube, double shoulder oil pressure shock absorber, no lock, stroke 180MM, barrel shaft 20MM.
  • Features：opening 110mm/Effective suspension stroke 160mm /Stroke: 170mm.
Check Stock

Elevated Archery Small Diameter Arrow Cresting Wraps for Carbon Shafts - Pack of 12 (White, 4')

  • High quality, adhesive-backed, thin vinyl arrow wraps. Glue fletchings directly to the wrap..
  • For small diameter carbon arrows up to a .204 inner diameter shaft with a max OD of 0.285..
  • Add weight to the back of the arrow to adjust your arrow’s FOC, stiffen the spine of your shaft in flight, and tune better..
  • Family owned and operated company | Made in USA.
Check Stock