Best Input Board

SparkFun MicroMod GNSS Function Board - ZED-F9P GPS Function Board -ZED-F9P Operating Voltage: 3.3V. Board Dimensions: 2.5in x 2.6in x 1.3in

  • The SparkFun MicroMod GNSS Function Board takes everything we love about the ZED-F9P module from u-blox and combines it with the MicroMod system!.
  • The ZED-F9P Features: Concurrent reception of GPS, GLONASS, Galileo and BeiDou. Receives both L1C/A and L2C bands. Input Voltage: 5V or 3.3V but all logic is 3.3V. ZED-F9P Current Consumption: 68mA - 130mA (varies with constellations and tracking state) Time to First Fix: 25s (cold), 2s (hot).
  • Other Features: Max Navigation Rate: PVT (basic location over UBX binary protocol) - 25Hz. RTK - 20Hz. Raw - 25Hz. Horizontal Position Accuracy: 2.5m without RTK. 0.010m with RTK. Operational Limits: Max G: ≤4G. Max Altitude: 50km (49.7 miles) Max Velocity: 500m/s (1118mph).
  • The Function Board includes a USB-C connector for powering and programming the ZED-F9P directly. The board also includes a selection of 0.1"-spaced PTH pins for signals not connected to the MicroMod M.2 connector including UART2, Geofence and RTK status signals as well as the ZED-F9P interrupt and reset pins..
  • The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions including RTK that is capable of 10mm, three-dimensional accuracy.ZED-F9P Board Dimensions: 2.5in x 2.6in x 1.3in. -Input Voltage: 5V or 3.3V but all lo....
Check Stock

Peavey VYPYR® X1 Guitar Modeling Amp

  • 36 on-board amp models including 6 acoustic and 6 bass amp models.
  • 12 stompbox effects with dual parameter control.
  • On-board looper with optional Sanpera(tm) footswitch.
  • 3.5mm aux in for connecting external audio sources.
Check Stock

BIQU LCD 12864 Version Graphic Smart Display Controller Module with Adapter and Cable for RAMPS 1.4 Reprap 3D Printer Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine

  • The MACH3 interface board is connected to the computer through the USB port and the LPT port. The length of the USB cable and the 25-bit LPT cable cannot exceed 1.5 meters..
  • 1. A special high speed chip is used to process the input and output (I/O) signals. It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals..
  • 2. The computer LPT port supplies the power individually, separating from the power supply of other parts. Therefore, the computer and machine tool isolate effectively. It makes the data more secure, with further insurance of security and stability..
  • 3. There are 5 input signals, communicating with the host computer, which are isolated by the optical coupling. Among the optical coupling isolation, the P11and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, B..
  • 4. There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axis linkage. Some of the output port is reusable functinality. Meanwhile, one port only can be used as one function.5.This board only support LPT port,if your laptop does not have its own parallel port,you....
Check Stock

Presto 14109 Presto 1000 m

  • Flow Rate: 1.2 L/S with automatic flow regulator.
  • Supplied with nut, washer nozzle output and American Board for tube 28 mm device built-in antisifnico.
  • Dynamic Pressure Minimum you need to input the fluxor: 0.900 bar interchangeable piston that includes the whole mechanism of fluxor.
  • Body and Trim Material in chrome-plated brass, internal parts are resistant to corrosion and limescale.
  • Gross weight: 0.530 kg Noise Level Category II according to regulations in 200.
Check Stock

Diitao 50W×2+100W Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel, 12V-24V Audio Power Amplifier Module with Treble and Bass Control for DIY Bluetooth Audio ZK-MT21, Black

  • 【ZK-MT21 Power Amplifier Board】Uses Bluetooth 5.0, and its transmission distance can reach 49 feet (without obstruction). At the same time, this power amplifier board has a 3.5mm AUX audio input interface..
  • 【Specification】With 36*25*10mm heat sink, suitable for power supply DC12-24V/5A or above (24V battery pack cannot be connected), suitable for speakers 20~100W, 4~8Ω..
  • 【Protection Function】ZK-MT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection..
  • 【Come With DC Conversion Plug】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-MT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product..
  • 【Tips】There will be enough output power only when the audio input is sufficient and the power supply voltage/current is sufficient.The higher the power supply voltage, the greate....
Check Stock

VSDISPLAY HD-MI VGA LCD Controller Board VS-RTD2556HV-V1 Work for 1920x1080 N116HSE-EA1 EJ1 EB1 N133HSE-EA1 EA3 B140HAN01.0 B140HAN01.2 B156HAN01.1 B156HAN01.2 N173HCE-E31 30 Pin EDP WLED LCD Screen

  • Compatible Work With: 11.6 inch 1920 x 1080 N116HSE-EA1 N116HSE-EJ1 N116HSE-EB1 N116HSE-EAC N116HSE-EBC 13.3 inch 1920 x 1080 N133HSE-EA1 N133HSE-EA3....
  • Compatible Work With: LTN156HL01 LTN156HL02-201 LTN156HL06-C01 LTN156HL07-401 LTN156HL09-401 17.3 inch 1920 x 1080 N173HCE-E31 N173HGE-E11 N173HGE-E21....
  • HD-MI VGA Board Work for 1920x1080 30Pin EDP Interface WLED Backlight LCD Screen (Audio Input: HDMI Audio Output: Earphone Speaker).
  • Recommend Power Adapter Spec. Input Power Adapter: 12Vdc More than 2A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply,....
  • Packing list: 1×HDMI VGA LCD Controller Board VS-RTD2556HV-V1 1× EDP Inverter Board 1× 2pcs Signal Cable E000202 E000203 1× Keyboard With Cable....
Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

  • 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
  • DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
  • 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check Stock

EleksVU2 Analog VU Meter RGB Sound Level db Display Panel | EleksMaker Elekstube

  • Adopting MCU to process the audio signal, better to achieve exponential gain driver, provides ultra-wide input signal auto adjustment, the display effects can be greatly upgraded than the common VU meters in the market..
  • Reasonable and concise circuit layout, the power supply is only provide power to the driver board and VU meter, not pass through audio input and output circuit, the sound quality will not be interfered but only adding the dynamic visual enjoyment..
  • With auto gain adjustment, very easy to control most input signals and achieve better beating effects. Backlight function can be turned on or turned off, convenient to use, and the bright and warm light can decorate your desktop or live studio..
  • With standard stereo L/R RCA input and output, can compatible with most common audio device such as mobile phone, computer, CD players, preamp, power amplifier or studio mixers and so on, suitable for a variety of scenarios..
Check Stock

Douk Audio Analog VU Meter Panel DB Sound Level Indicator for Amplifier Preamp Preamplifier

  • Adopting MCU to process the audio signal, better to achieve exponential gain driver, provides ultra-wide input signal auto adjustment, the display effects can be greatly upgraded than the common VU meters in the market..
  • Reasonable and concise circuit layout, the power supply is only provide power to the driver board and VU meter, not pass through audio input and output circuit, the sound quality will not be interfered but only adding the dynamic visual enjoyment..
  • With auto gain adjustment, very easy to control most input signals and achieve better beating effects. Backlight function can be turned on or turned off, convenient to use, and the bright and warm light can decorate your desktop or live studio..
  • With standard stereo L/R RCA input and output, can compatible with most common audio device such as mobile phone, computer, CD players, preamp, power amplifier or studio mixers and so on, suitable for a variety of scenarios..
Check Stock