Best Installations

Fluke 1577 Insulation Multimeter, LCD Display, 600 Megaohm Resistance, 500/1000V Voltage

Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear.
True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform.
Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms.
Live circuit detection prevents insulation test when voltages over 30V are detected.
Safety ratings include Ingress Protection certified IP40.
IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1.
and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2.

Digital microohm meter has six test current and resistance ranges for low-resistance measurements from 1 microohm to 400 ohms.
Four input terminals for taking Kelvin-type, four-wire resistance measurements, which are more accurate than two-wire resistance measurements.
Includes PC software for configuring the meter, storing and analyzing data, generating reports, and performing temperature compensation of readings.
Polarity reversal function improves reading accuracy by compensating for interference from thermal electromagnetic fields (EMF).
Meets EN safety standard 61010-1, and is rated for CAT III installations to 50 volts and CAT II installations to 300 volts.

Flat head with countersinking nibs allows the screw to drive clean and flush to the surface.
Square drive for a confident stick fit while driving.
Secondary serrations reduces drive torque for easy installations.
Type 17 cut point helps prvent wood splitting and allows for quick penetration.

Used for extending set back electrical boxes up to 1-1/2-inches, levels and supports wiring device.
Automatically levels and supports outlets, switches, GFCIs, and other standard devices.
Works with handy boxes and 4-inch square electrical boxes with plaster rings for single switches.
Manufactured from 94VO rated flame retardant plastic for safer installations, two hour fire rating.
Used for extending set back electrical boxes up to 1-1/2-Inch, levels and supports wiring device.
Also used for handy boxes and 4-Inch square electrical boxes with plaster rings for single switches or receptacles.

Quick & Economical Mount For Adding Compact Off-air Antennas To Satellite System.
22in Pipe E-coated For Maximum Weather Protection.
Includes Two 2in U-bolts Adaptable To Different Pole Installations.
Use Without U-bolts For Attic Installations.

Auto- and manual-ranging digital multimeter measures current, voltage, and resistance, and performs diode and continuity tests.
Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform.
Audible continuity sensor confirms that the circuit conducts electricity.
RS-232 output exports data to a computer (cable and software not included).
Meets IEC safety standard 61010 and is certified for Category II installations up to 1000V and Category III installations up to 600V, and Pollution Degree 2 for indoor use.

CONTRACTOR-GRADE inflatable air wedge for window, door and cabinet installations.
replaces damaging pry bars and wooden shims.
300 LB LOAD RATING safely handles full size installations with just a single installer.
ROUNDED CORNER AND INTERNAL STIFFENER gets into tight 3/32” gaps and won’t fold under pressure.
WIDE 2-1/2” GAP SPANNING CAPACITY means greater lifting or pushing range and more versatility on the job or around the house.
EASY ONE-HANDED OPERATION using simple squeeze pump and precise bleeder valve lets you raise and lower to perfect alignments.

DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard.
Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines.
Optional escutcheon available for 3-hole installations (purchase separately).

NEW INSTALLATION FIT – This lock set is perfect for interior doors with a 2-3/8" backset. INSTALLATION TIP - Use of thread locking adhesive on the set screw will keep knob from slipping.
BEAUTIFUL, TRADITIONAL GLASS KNOB LOCK SET - The E 2497 glass knob set is the perfect choice for replacing or updating interior door hardware. With a classic bronze plated steel trim and beautiful glass knob, it’s the perfect choice for your next project..
LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors..
REPLACe ANTIQUE LOCK SETS – This E 2497 Mortise lock set is the perfect choice for replacing knobs on old doors. No matter what interior door you’re fixing, this classic lock set will add the perfect finishing touch..
LOCK BOLT KEY – This entry door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside..
For all dimensional information please refer to the line art and compare to your needs before purchasing.

ACCORRDIAN DESIGN – Extends length from 10” to 13”.
UNIVERSAL - Fits 1-1/2" and 1-1/4" Installations (1-1/2” to 1-1/4” reducing gaskets included).
FLEXIBLE DESIGN - Good for constrained space and odd installations.