Best Insulation Board R Value

Antique Markers

  • One-sided printable for wire identification and insulation purposes.
  • Fit snugly around wires for maximum insulation protection and permanent identification.
  • Meets the rigid insulating material requirements and physical properties of MIL-DTL-23053/5 Class 1, MIL-M-81531, MIL-STD-202F, METHOD 215, and UL224 when printed with R5000 dot matrix and R4300 and R4502S (for black sleeves only) thermal transfer ribbons.
  • Meets the material and physical property requirements of SAE AMS-DTL-23053/5C (Class 1) for Insulation Sleeving and SAE AS-81531 for Marking of Electrical Insulating Materials when printed with R5000 Series dot matrix, R4300, R6600, R4502S, or R6700 Series thermal transfer ribbons.
Check Stock

SmartSHIELD -5mm 48"x50ft Reflective Foam Core Insulation roll, Cold and Heat Shield, Radiant Barrier, Thermal Insulation - Engineered FOIL / White Film

  • EXTREMELY EFFECTIVE - reflects 95% of radiant energy, R -value up to 15.67 with one layer..
  • ALL IN ONE PRODUCT - Insulation (R15), Radiant Barrier, Vapor Barrier, Sound Barrier..
  • EXCELLENT LOOK - Clean white look, requires no painting, No additional insulation required..
  • SUPREME QUALITY - 5mm closed-cell polyethylene foam, laminated with Highly Reflective Engineered Foil on one side and a white polyethylene film on another..
  • FIRE RATE - Fire rate Class 1 / Class A, NON TOXIC - will not irritate skin, eye or throat. Non allergic..
Check Stock

Two-Component Polyurethane Foam Kit 600 Board Feet

  • Portable, disposable and self-contained with color-coded, pre-connected hoses..
  • 1.75 PCF FR Standard Formula Closed Cell. High R-value. Reduces sound transmission. Reduces energy loss by as much as 40%..
  • Foam Kit 600 covers up to 600 square feet at 1 inch thick. Significantly increases structural strength..
  • Compatible with all fiber insulation systems including cellulose, fiberglass and rockwool.
  • Expands to fill smallest to largest gaps, cracks and holes, reducing air exchanges.
Check Stock

GENIE Garage Door Openers 36521R Internal Receiver Board

  • Internal receiver board for Genie Intellicode Garage Door Openers..
  • Compatible with part numbers 34375R, 31171R, 33629R, 35593LA, 20437R, 36306R..
  • his is the factory replacement internal receiver board for the OBSOLETE 20437R receiver. It is smaller in size, but installs, mounts, and programs in the same fashion as the old board..
Check Stock

1 Quart / 950ml 85% Food Grade Phosphoric Acid Rust Remover Clean Etch Metal

  • Inner Tank: Food Grade SUS 304-2B, Outer Tank: Galvanized Steel 0.5 mm thickness.
  • Insulation: high pressure automatic polyurethane foaming layer, Density of 36 kg/m3, R-Value: 12.5.
  • In Tank Coil: TU1 copper (Red Copper), thickness: 1mm, Length of Coil:66 ft.
  • Water Ports: 3/4" NPT, Coil Ports: 1/2" MPT, T/P Valve/Abode Rod/Drain Port: 3/4.
Check Stock

Duct Insulation, 1-1/2In x 48In x 25 ft.

  • Price For: Each Material of Construction: Fiberglass Standards: ASTM C-411, ASTM C-1104, ASTM C665, ASTM C-1338, ASTM E-84, UL723, NFPA 90A, CAN/ULC S102-1188, ASTM C1290, ASTM C553, ASTM C1136s Item: Duct Insulation Thickness: 1-1/2" Color: Silver Jacket Material: Foil Scrim Kraft Type: Wrap Width: 48" Temp. Range: -32 to 250 F Density: 3/4 lbs. Approx. R Value: 4.2.
  • Length: 25' Country of Origin (subject to change): United States.
Check Stock

FAKRO LWF 869720 U.S Certified Fire Resistant Attic Ladder for 30 x 54-Inch Rough Openings

  • Easy-to-install fire-resistant and insulated wooden attic ladder.
  • also prevents heat loss with R-Value 9.5 insulation.
  • Adjustable to fit Ceiling heights between 7 feet, 11 inches and 10 feet, 1 inch.
  • Well balanced door opens and closes easily with no sudden movements.
Check Stock

3-1/2\ x 6 ft. Elastomeric Pipe Insulation, 1/2\ Wall

  • 003cb003ePrice For:003c/b003e Each 003cb003eTemp. Range003c/b003e: 0 Degrees to 850 Degrees F 003cb003eMaterial003c/b003e: Fiberglass 003cb003eLength003c/b003e: 3 ft. 003cb003eColor003c/b003e: white 003cb003eStandards003c/b003e: ASTM C547 Type 1, ASTM C585, ASTM C1136, NRC 1.36, ASTM C795, Mil-I-24244C, MEA Compliant 003cb003eFor Iron Pipe Size003c/b003e: 1/2" 003cb003eInsulation Type003c/b003e: Hinged with Self Sealing Lap 003cb003eApprox. K Value003c/b003e: 0.23 003cb003eItem003c/b003e: Pipe Insulation 003cb003eWall Thickness003c/b003e: 1/2" 003cb003eApprox. R Value003c/b003e: 2.2.
  • 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

HY-C T2UL1848BL-1C Type 2 Hearth Extender, 18' x 48', 18 by 48-Inch, Black

  • Provides non-combustible thermal and ember protection for floors and walls from the intense heat, hot coals, ashes and soot that wood burning appliances can produce.
  • Use as a stove board or hearth extender to protect the floor in front of your fireplace or as a wall shield to protect your walls.
  • Embossed printed steel and 1/2" thick, specially formulated fiber board backing.
Check Stock

Replacement for Garage Door Opener Belt or Chain Drive Pulley, Genie Part # 39591A.S

  • Well-defined, detailed, carriage house panel design for excellent curb appeal.
  • Vinyl-backed polystyrene insulation for 6.64 R-value energy efficiency and noise reduction.
  • Low-maintenance, woodgrain embossed steel with durable 4-layer paint system.
  • Flexible bottom seal to keep out the weather elements.
  • Can be painted to match your home's exterior.
  • Professional installation sold separately.
Check Stock