Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool
【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
Halero Pipe Wrap Insulation 1/5 Inch Thick Pipe Insulation High Density Waterproof Foam Tape with Self Adhesive Application for Hot or Cold Pipe 26FT Length× 6 Inch Width
【High Density Foam】This duct insulation foam is made with high density closed cell PE foam material and a high quality aluminum foil backing,which has good insulation properties, and is resistant to cold, heat, oil, and moisture..
【Strong Self Adhesive】Can firmly stick to the surface, not easy to fall off, can provide better sealing..
【Easy to Cut】The pipe warmers material is easy to cut and install, and can be cut according to the length you need. Since the width is wider than the general insulating foam adhesive, it can be divided into two or more parts for use..
【Excellent Thermal Insulation Effect】Our pipe insulation tape is very suitable for hot and cold pipes. It can lock the heat of the hot water pipes to avoid loss, and also help to prevent the cold water pipes from getting wet and prevent the floor from getting wet. At the same time, it also has a certain protective effect on the pipes..
SOKINGCOVER Backflow Insulation Cover Backflow Preventer Cover 30 W x 24 H with EVA Thickened Cotton Protection Insulated Pouch for Winter Backflow Freeze Protection Faucet (Khaki)
[Insulation and waterproof] Durable industrial-grade 600d Oxford cloth and Pp insulating cotton, heavy-duty return protection cover will never tear or break. It has good waterproof and insulating properties, can withstand severe weather, heavy snow, heavy rain, strong wind, strong sunlight and high temperature, and prevents pipeline freezing.
[Easy to use]Cover the winter return pipe on the pipe, and the bottom is made of strong Velcro to prevent it from being blown away by the wind. The two built-in holes at the bottom of the insulating cover can provide higher security. If necessary, just use a wire lock or plastic safety tie to fix it.
[Please measure before purchase]30" W x 24" H multi-purpose reflow bag. It is recommended to measure the pipe before buying to ensure that the isolation bag fits your return system and keep it 1 inch or larger.
[Best choice] Can be used in any pipeline installation to provide maximum protection. Our durable and tested backflow prevention and heat insulation cover can immediately protect the outdoor pipeline from freezing and can be used as a water valve cover, irrigation cover, well pipe cover or sprinkler valve cover.
[Perfect appearance and high performance] Our counter-current sets are integrated with your ho....
LORESO Tube Bender Tubing Bender 0-180 Degrees Pipe Bender - 3 In 1 Copper Bender for 1/4 5/16 3/8 Tubing Bending Tools- Manual Tubing Bender for Copper Brass Aluminum and Thin Steel Pipes
MANUAL TUBING AND PIPE BENDER – manufactured with high-quality, heavy duty steel, this tube bender will efficiently bend copper, brass, aluminum and....
VERSATILE PIPE BENDER FOR ALL INDUSTRIES – this copper pipe bender is suitable for use on construction sites, plumbing jobs, shipping,....
EASY TO OPERATE – the Loreso manual pipe bender is easy to operate and portable so you can take it from site to site. Made with high precision and....
VARIOUS DEGREES AVAILABLE – simply adjust the metal bender according to the angle you require from 0-180 degrees. This pipe bender is a 3 in 1 tool....
STURDY CAST IRON FRAME – our copper tube bender is made from strong, durable cast iron and can be mounted on either a bench or frame – the safest....
Libraton Pipe Cutter Tubing Cutter 3/16 to 2 Outer Diameter Copper Pipe Cutter Tube Cutter with Deburring Tool Copper Cutter Pipe Cutter Tool for Copper and Thin Stainless Steel Tube
[High-quality Blade] Libraton pipe cutter blade is made from SKD-grade material, wear-resistant. It will never get rust..
[Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
[Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
[Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
[Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
6 Rolls Aluminum Tape 2 Inch Wide Adhesive Foil Tape Silver Heat Resistant Tape Insulation Tape High Temperature Heavy Duty HVAC Tape for Sealing and Patching Ductwork Dryer Vent HVAC (65 Feet Long)
6 Rolls Aluminum Tape 2 Inch Wide Adhesive Foil Tape Silver Heat Resistant Tape Insulation Tape High Temperature Heavy Duty HVAC Tape for Sealing and Patching Ductwork Dryer Vent HVAC (65 Feet long).
Moderate Thickness: made of aluminum foil, with the silver metallic gloss, the HVAC tape for ducts is about 3.9 mil/ 0.1 mm thick, which makes it firm and sturdy to resist break, and also flexible to fit your pipe surface, the moderate thickness is ideal for both professional and normal usage.
Reliable Adhesive: with quality pressure sensitive acrylic adhesive, the aluminum tape has dependable persistent adhesion at both low and high temperatures, and the long term temperature resistance is 120 degrees Celsius, the short term temperature resistance is 130 degrees Celsius.
Beyond that, the tape can also resist UV, water, so that it can perform well in different weather.
Easy to Separate: owing to the paper and aluminum foil being thicker.
Even with small tears, the metallic tape is simpler to remove from the boundaries.
It is simpler to handle and will save you time because the tape itself does not wrinkle or curl.
Stronger sticking, simpler peeling, no stains, no adhesive residue.
Extensive Applications: the foil tape works well on both smooth, flat surfaces....
Libraton Pipe Cutter Tubing Cutter Copper Pipe Cutter 1/6” to 1-1/4” Outer Diameter Tube Cutter with Deburring Tool Copper Cutter Pipe Cutter Tool for Copper and Thin Stainless Steel Tube
[High-quality Blade] Libraton pipe cutter blade is made from SKD-grade material, wear-resistant. It will never get rust..
[Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
[Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 1-1/4" (32mm)(OUTER DIAMETER)..
[Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes)..
[Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Price For: Each Approx. K Value: 0.23 Insulation Type: Elastomeric Item: Pipe Insulation Length: 6 ft. Material: NBR/PVC Based Elastomeric Color: Black For Iron Pipe Size: 1-1/2" Temp. Range: -70 Degrees to 220 Degrees F Wall Thickness: 3/4" Approx. R Value: 4.8 Country of Origin (subject to change): United States.
