Best Intake For Mkgti

Akozon Air Turbonator, Car Air Intake Double Fan Turbine Charger Fuel Saver Turbo Charger(Red)

  • Professional Design : The fan blades of this air intake turbonator are designed with a professional angle to enhance the gas flow rate. Double-sided 10-blade prfor Opellers allow the turbine to deliver super-large output.
  • Energy Saving : Exquisite craftsmanship and high performance,use this fuel saver turbonator could save about 5%-15% of fuel for your vehicle..
  • Aluminum Alloy Material : The pick-up piece is made of high-strength aluminum alloy, which has durability, corrosion proof, non-deformation, light weight but high hardness, allows to withstand slight collision.And will not be deformed due to long-term use..
  • Installation instructions: The power acceleration system turbo is installed in the intake hose between the original car bellows and the throttle va e. When installing, the thickness of the rubber collar should be configured according to the diameter of the original car's intake hose..
  • Work Principle : When the engine is normally started, the turbonator could take advantage of natural intake of the engine to drive the fan to rotate at a high speed. While rotating, a large....
Check Stock

XTechnor Tesla Model 3 Air Intake Filters Cabin Air Vent Intake with Activated Carbon Air Conditioning Air Intake Inlet Cover for 2017 2018 2019 Tesla Model 3

  • Best Part to keep filter life longer- XTechnor Tesla Model 3 Air Intake Filters is Customed fit for 2017 2018 2019 Tesla model 3 exterior accessories frunk air inlet cover..
  • UPGRADED PROTECTION- Unlike the other intake grille, XTechnor carbon air inlet vent cover can keep leaves or small stuff from clogging up and block impurities, fall into the AC intake system. Even prevents harmful fine particles and dust from entering the vehicle cabin while keeping clean and healthy environment to passengers..
  • Apply High Quality Air Filter: (1)Fine fiber filter paper and small molecular material, with dust collection and filtration effect.
  • (2)High-performance activated carbon strongly adsorbs odors and harmful gases in the air.
  • (3)A melt blown electrostatic layer is added to trap fine particles by electrostatic charge..
  • ONE STEP TO INSTALL- It is easy to Install, take off the original air conditioning air intake grille cover, and just place the air intake filters to there without any tools..
  • XTechnor PROMISE – We offer a LIFETIME, NO-QUESTIONS-ASKED, MONEY-BACK GUARANTEE to our tesla model 3 owner after ordering our car air filter..
Check Stock

AloneGoer 50cc 139QMB Carburetor for Scooter GY6 PD18J Chinese Taotao 49cc 50cc 18mm Carburetor Moped Parts with Electric Choke for 4 Stroke Scooter Engine

  • The CVK-style 50cc scooter carburetor is designed specifically for 49cc 50cc QMB139 4-stroke scooters which is used on many TaoTao GT5 50 scooters..
  • This carburetor is equipped with an electric choke..
  • 18mm PD18J Carburetor for 49cc 50cc Chinese Scooter Taotao Kymco Jonway Baja Banzer Barton Zipp Romet Jmstar Lance NST Peace.
  • Package include: 1x carburetor + 2x fuel filter + 2x spark plug.
Check Stock

ABC's For Future Race Car Drivers Alphabet Book (Baby Book, Children's Book, Toddler Book)

  • Fitment:The air intake turbo has a wide range of applicability.It is fit for general cars..
  • High quality:The air intake turbonator is made of high level aluminum alloy and rubber,waterproof,fireproof,lightweight and durable, long service life..
  • Save energy:Exquisite craftsmanship and high performance, provides more dynamic control over the intake system by forcing powerful airflow into the combustion chamber at high speed, charged fuel-saving fan with twin propeller,can increase horsepower and better on gas/fuel millag, saving about 5%-15% of fuel for your vehicle..
  • Easy installation:You just need to remove your original air intake turbo and install.Direct replacement, stable performance, high reliability. But We recommend professional installation..
  • Quality guarantee: Aramox is a professional seller on Amazon. If you meet any trouble when you use our device, you can contact our customer service staff, we will provide you with solution in time..
Check Stock

BBK 1506 3/8\ Phenolic Intake Manifold Spacer Kit for GT-40 and Cobra EFI Intake Manifolds

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

FIRSTINFO A1601 4 in 1 Intake Valve Cleaner Combustion Chamber Cleaner/Vacuum System Cleaner/Vacuum System Pressure Tester Kit

  • 【 Maintain Engine Performance 】 Perfect for air intake system, combustion chamber, EGR Valves, intake valves and oxygen sensors. Easy operation for making the fuel injectors spray smoothly and properly..
  • 【 Easy to Use 】 Simply fill with air intake cleaning liquids and connect the vacuum hose of vehicle vacuum system. Reduce carbon deposits easily..
  • 【 Multiple Applications 】 Use to clean the intake valve, combustion chamber, vacuum system and test the vacuum system pressure. Provides more thorough cleaning than other methods. Effectively remove engine carbon deposits and increase gas mileage performance..
  • 【 Equipped with Negative Pressure Gauge 】 The liquid-filled gauge for accurate vacuum pressure reading and monitoring chemical flow..
  • 【 Gasoline Engine / Petrol Cars Use 】 Used for gasoline engine injection and petrol cars. "NOT" for diesel injector. And solution liquid is "NOT" included..
  • 【 100% Genuine Guarantee 】 We provide you quality assurance tools with 12+10 months after-sales warranty (10 months warranty by register) support. Help you to achieve the satisfactory shopping experience..
Check Stock

BBK 1520 3/8\ Phenolic Intake Manifold Spacer Kit for Edelbrock Performer EFI 5.0L Intake Manifold

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

139QMB Carburetor Fit for 49CC 50CC GY6 4 Stroke Scooter Taotao Kymco Go Kart PD18J PD19J Moped Engine 18mm carb+ Intake Manifold Air Filter -139QMB Carburetor 50CC Scooter

  • 【Compatible For】:GY6 49CC carburetor will fit almost all the Chinese Made 4-stroke 139QMB 50CC 60CC 80CC PD18J PD19J SCOOTERS and ATV. Such as JONWAY, JMSTAR, ROKETA, SUNL, TANK, PEACE, TAOTAO, Dongfang, Kazuma, JCL, BMS..
  • 【Application】:139QMB Carburetor for GY6 50CC 49CC 4 Stroke Scooter Taotao Engine 18mm carb+ Intake Manifold Air Filter – 50cc Carb 50cc Scooter Carburetor 49cc Moped Parts.
  • 【High Quality】:GY6 50CC Carburetor comes with a #75 Main Jet for better fuel to air ratio.This Carburetor upgraded jets for better starting, idling and performance.It’s an ideal replacement for your stock one,and will make your engine run like new!.
  • 【Product Specification】:Intake Manifold side: 18mm (Inner diameter).
  • Intake Manifold side: 28mm (Outer Diameter).
  • Air Filter Intake: 35mm (Inner diameter).
  • Air Filter Intake: 39mm (Outer Diameter).
  • Electric Choke (plug style): 2-pin, male.
  • 【After-sales service】Confidence comes from quality!90-day free replacement! No risk purchase.So buy it WITH CONFIDENCE.true worry-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Towing Power, Guaranteed to Increase Horsepower up to 11HP: Compatible with 5.7L, V8, 2019 Dodge Ram 1500, 63-1578

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 11HP and up to 15.5 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • BETTER TOWING: Air intake kit improves acceleration and uphill performance when towing by improving throttle response and overall horsepower and torque.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Towing Power, Guaranteed to Increase Horsepower up to 17HP: Compatible with 3.5L, V6, 2016-2019 Toyota Tacoma, 63-9039

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 17HP and up to 12.84 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • BETTER TOWING: Air intake kit improves acceleration and uphill performance when towing by improving throttle response and overall horsepower and torque.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
Check Stock