Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity
Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
NGFF(M.2) to USB 3.0 Adapter with Dual Nano SIM Card Slot for 3G/4G/5G Module
1.Install the driver to find the module supplier you purchased. If you don’t have the module and SIM card, you will not be able to use the driver.
2.USB 3.0 type A male to desktop or notebook PC,Supports USB 3.0 interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, 5G Mini Card to desktop PC.
3.Supports system bus interface: USB 3.0.
4.Supports dual NANO SIM card Push connector.
5.Supports 3042/3052 type M.2 key B Card dimension.
WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter (Yellow Green/2004)
【20x4 LCD Display】With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
【IIC Interface Adapter】No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
【Easy to Use】 Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Address of the module: 0x27.
【Support IIC Interface】It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
【Widely Applications】LCD display module based on the popular controller, works great with for Arduino and other micro-controllers..
GPS Module GPS NEO-6M Ar duino GPS Drone Microcontroller GPS Receiver Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning
How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use..
★Note: This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. When using it, please make....
GPSBaud needs to be set to 9600 instead of 4800.
PPS pin is not needed unless using the GPS to drive a hardware high precision clock.
With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
Fit for Ford F150 Carplay SYNC 3 USB C Module SYNC 2 Upgrade to SYNC 3 Media Wiring Hub Adapter Plug Interface ONLY 3.4 Version Blue HC3Z-19A387-B HU5Z-19A387-A
Dual Port Design - Dual port interface module with new design, support for USB and type-C connections, for Ford Apple Carplay SYNC3, Only 3.4 Version.....
Vehicle Application - SYNC 3 USB interface and type-C interface module fit for 2019 Ford Edge, for 2018 FORD FIESTA ST, for 2017 2018 2019 Ford....
ONLY 3.4 Version - The new Type-c plug features fast charging and more stable data transmission. It is used with the USB interface to easily charge....
Material and Installation - Single port design direct replacement, just plug and play, no need to cut, and display blue light when the power is turned....
Service and Package - You will get a 2-years shelf life for our store. If you have any questions about this product during the installation process,....
HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Bewinner Mini PCI-E, PCI Express Extender to Internal 2 Port 19Pin Header Fast 5Gbps PCI-Express USB 3.0 Card Adapter with Low Profile for winXP, win7 win8 win8.1 win10
Comes with 4 power modules, 4 independent insurances, 4 solid capacitors, 2 USB3.0 19pin interfaces on the board. 2 USB3.0 19 Pin Connectors: Allows you to extend 4 USB 3.0 ports to your desktop PC by means of the two internal 19-pin USB3.0 ports..
High-quality master IC: Advanced technology, low heat, fast, stable operation, perfect welding, excellent workmanship, uniform layout, neat, to maximize the interference, and greatly improve the stability..
4 Independent Insurances: Each interface is equipped with an independent protective insurance. When the external USB device is short-circuited and the current is too high, the power can be cut off instantly to protect the peripherals and the computer from being damaged. After the fault is removed, the system automatically returns to normal..
4 Solid Capacitors: Each interface is equipped with an independent regulator capacitor to ensure a smooth supply of each interface. And the capacitors using solid-state chip, can withstand up to 250 high temperature..
Super power supply module: Each USB 3.0 interface is equipped with an independent power supply module, and each interface is exclusively provided 2A power supply, a total of 8A power supply. Besides, the inductor adopts 12mm * 12mm closed super-power induc....
Hong TTH - Parts & Accessories 1PCS Frsky Taranis Q X7 / QX7S AA Battery Tray
The X7S ACCESS features 24 channels with a faster baud rate and lower latency thanks to its high-speed module digital interface. As with the rest of the ACCESS transmitters, it provides a secure and reliable link, along with wireless firmware updating making it fully compatible with our newest line of OTA receivers. The battery compartment now uses 2 18650 Li-Ion batteries and can be balance charged via the Mini USB interface..
The X7S ACCESS version features Hall-sensor gimbals and the PARA wireless trainer function, making it compatible with the FrSky Free Link App and AirLink S, while the wired training port is still retained..
Includes: Taranis X7 ACCESS transmitter and R9M 2019 Module (18650 batteries are NOT included).
8 Pieces Camera Compatible with Raspberry Pi Module with 15 Pin Ribbon Cable and Flex Extension Cable Set Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4
Focus lens: OV5647 Pi camera sensor has a fixed-focus lens, which can capture clear and beautiful images quickly and easily, helping you keep happy moments and save unforgettable memories.
CSI interface: 5-megapixel camera module uses a dedicated CSI interface, so the higher bandwidth ink that carries pixel data from the camera back to the processor via the CSI bus, interface carries pixel data from the camera back to the processor, BY THE WAY with pi zero ribbon cable can be applied on zero board perfect.
Resolution parameter: 2592 x 1944 Pixel Static Images, 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,5 megapixel sensor OV5647, and its video resolution is 1080p, which is clear enough for you to use.
This is a practical design for you to take some beautiful photos of your family.
Flex extension cable set: whatever for 3D printer, home security, or other for raspberry pi camera project, this camera cable set can totally meet your requirement.
Compatible with all Raspberry Pi board, camera module and display, suitable for octoprint 3D printing monitoring.
Wide compatibility: this 5 megapixels camera module is compatible with raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4, works well with your equipment, bring y....
