Best Internal Pipe Cutter Steel

Inside Pipe Cutter, 1/4\ Hex Shank PVC Plumbing Inside Cutter Internal Plastic Pipe Cutter Set (32mm Saw Blades*3, 44mm Saw Blades*1)

  • Inside plumbing pipe cutter kit installation sequence: extension rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), and two sets of screw fastening parts. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pipes need to be cut from the....
Check Stock

DOMINOX 2-1/2 O.D Pipe Cutter with Deburring Tool Two Sets Stainless Steel Blade Apply for DIY Home Worker Professional Cutting PEX PVC and PPR Pipe Etc 2-1/2 O.D

  • HIGH QUALITY MATERIAL: The pipe cutter blade is made of high quality stainless steel, the protruding part of tubing cutter blade can better cut into....
  • ADVANCED STRUCTURAL DESIGN: With a TRIANGLE blade, the DOMINOX PVC Cutter penetrates the pipe wall with less presure which presents less damage to the....
  • SAFE & RELIABLE: The hose cutter ratchet wheel at the bottom of the blade is designed so that the blade can be locked in time when cutting the pipe to....
  • ERGONOMIC DESIGN: The PVC cutter ergonomic grip is designed to allow the palm to fit into the palm for greater comfort. The pipe Cutter handle adopts....
  • LIFETIME WARRANTY: DOMINOX provides lifetime warranty service against defects in material or workmanship.
Check Stock

Reed 03507 Set of (4) Hardened Steel HSI6-8 Wheels Fits SDT-H6 4'-6', SDT-H8 6'-8' Cutter & SDT-1224 Pipe Threader

  • Set of Four Hardened Steel REED HSI6-8 Cutting Wheels.
  • Fits SDT-H6 4"-6" Heavy Duty Hinged Pipe Cutter, SDT-H8 6"-8" Pipe Cutter.
Check Stock

RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel

  • 【Heavy Duty & Premium Quality】The Libraton PVC pipe cutter body is made of durable hardness aluminum alloy steel. The thick 3mm blade used is SK5 material with precision sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
  • 【Widely Application】The Libraton ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Efficient Working with Safety】This professional pex cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
  • 【Quick Change】This PVC pipe cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. PLEASE NOTE THAT THE REPLACE....
Check Stock

ABN Exhaust Pipe Cutter Tool - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool Muffler Pipe Cutter

  • CUT PIPES EASILY: Quickly remove old exhaust pipes with the ABN Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness.
  • ACCESS HARD TO REACH AREAS: 10 inch (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts.
  • DURABLE CUTTING BLADES: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels.
  • EASY TO USE: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • COMFORTABLE GRIP: 9.3 inch (23.6cm) exhaust pipe cutting tool has 3.8 inch (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security.
Check Stock

KUNTEC Tailpipe Cutter 3/4-Inch to 3-Inch Exhaust Pipe Cutter Tool with 15 Blades

  • This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm).
  • The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting.
  • Exhaust pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable.
  • The rubber handle is good thickness and non-slip, easy to operate.
  • Cuts pipe up to 3mm thick. It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc.
Check Stock

Copper Tube Cutter 3/16''-2'' Tubing Cutter for Copper, Pipe Cutter Tool, Brass, Aluminum, Thin Stainless Steel & PVC with Deburring Tool

  • 【High Quality】LEMNISCATE Tube Cutter is made of aluminum alloy surface, and the blade is made of SKD. So it makes the lifetime longer..
  • 【Wide Cutting Range】Ideal for cutting heavy hard materials such as thin stainless steel, and all hoses such as aluminum, copper, and PVC pipes. Cutting pipes outer diameter range from 3/16’’ to 2’’(5mm-50mm). Adjustable cutting depth designed for fast and clean cutting..
  • 【Comfortable Design】The Pipe Cutter is attached with bearings, fitted on the roller to make the rotation more smoother and clean. Silica gel is added to the handle to maintain grip, so it is not easy to slip due to sweat on the hands. Bottom rotating knob adjusts the tube cutter to the proper fit in a seamless smooth movement..
  • 【Package Includes】LEMNISCATE Pipe Cutter Set includes 1 pc pipe cutter and a deburring tool is made of sturdy plastic surface and high-speed steel blade. It is able to clean the burrs on the pipe after cutting quickly. Receive 1 Replacement Wheels free when you purchase 1 or more Tube Cutters offered..
  • 【Multiple Applications】It is suitable for various construction sites, HVAC and refrigeration, plumbing, manufacturing, heating, decoration and even garage repair shops. Because of its light and small desi....
Check Stock

Exhaust Pipe Cutter Tool and Exhaust Hanger Removal Pliers for Cutting and Disassembly of Exhaust Piping Systems

  • Exhaust pipe cutter tool features pipe cutter chain w/ cutting wheels, exhaust pipe cutter w/ cushion grips, can be used as PVC cutter or copper pipe cutter. Replacement for exhaust pipe cutter chain, tailpipe cutter, tail pipe cutter, chain tail pipe cutter..
  • The exhaust pipe cutter can cut the exhaust pipe cleanly, reducing burr or burr.
  • Cut off the exhaust pipe on or off the car to facilitate repair or installation of a catalytic converter. Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Exhaust hanger removal plier separates the rubber supports from exhaust hanger brackets, works on all import and domestic car and truck exhaust systems that use the rubber hanger supports..
  • Exhaust hanger removal plier has anti skid handle for easier use. You only need to squeeze the handle of the pliers to remove the rubber bracket from the exhaust pipe hanger, so as to improve your work efficiency..
  • Exhaust pipe cutter tool and exhaust hanger removal plier are the best combination and can easily he....
Check Stock

Lenox Industrial Tools 12123 R1 PVC Cutter Upto 1-5/8-Inch Ratcheting Cut

  • The specially designed jaws on this PVC pipe cutter hold the pipe in place for straight, easy cuts.
  • This PVC cutter has rubberized grips that allow confident cutting, even in wet or dirty conditions.
  • A release button on this PVC pipe cutter allows true 1-handed operation.
  • Locking tab keeps the stainless-steel blade securely in place during 1-handed operation.
  • Cuts up to 1-1/4-inch nominal and 1-5/8-inch maximum OD.
Check Stock

Plumbing Inside Cutter, 1/4\ Hex Shank Pipe PVC Inside Cutter Internal Plastic Pipe Cutter(32mm Saw Blades*3, 44mm Saw Blades*1,Hexagon wrench)

  • Plumbing Inside pipe cutter kit installation sequence: extension rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), two sets of screw fastening parts and a hexagon wrench. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The plumbing saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pip....
Check Stock